Question about 2010 Honda Accord

Open Question

Drivers seat adjustment

Is possible to heighten the front seats above standard heights, my Honda motorcycle can be fixed in 3 differents heights - why not the same in the Accord?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 18 Answers

SOURCE: Driver seat not moving back and forth

under the seat is a thin wire that goes from one side to the other it has most likely broke you need to find the secondary lock it was connected to and release it to move the seat but you must also release the main lock so i suggest replacing the wire . THIS IS FOR MANUEL SEATS 
now as for power seats you will have to locate the power lead wire and make sure it is not broke if so you can replace the connecter with an aftermarket one and it may work again

Posted on May 15, 2009

  • 88 Answers

SOURCE: 1998 Honda Accord automatic seat broken. replacement?

the electric motor for forward and back is bad salvage yard easy to change let me know hey vote for me ok

Posted on May 26, 2009

  • 1 Answer

SOURCE: Seat adjustment forward and back stuck

I had this problem not to long ago, it's a very easy fix! I agree with that garr651!

There is a a thin metal wire that runs from the left & right side under the seat. Each end of the wire loops around a small hole on each track bracket and is held in place by two small washers that fit inside a grove.

Check to see if the washers are in the groves and holing each end of the wire tightly. If they're not simply slide them back into place and make sure the wire tight.

The easiest way to do this is to look under the driver seat from the back seat. Also a pair of needle nose pliers may become handy (although not necessary).

Posted on Jun 17, 2009

  • 89 Answers

SOURCE: 2003 Honda Accord sedan - passenger seat does not recline

You have to check the power to the recliner motor. If there is power, then replace the motor.

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: 99 honda odyssey driver seat repair

I would recommend you the following site: http://www.hondapartsnow.com

Would you mind sharing a step-by-step (or at least the most difficult part) of disassembling the seat? I have to do the same, and wonder what kind of tools, procedures and 'gotchas' to look for..

Posted on Apr 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I adjust the height of the driver's seat in a '74 beetle ?


this is not possible without extensive seat base modification. It would be cheaper to take the seat back to the upholsterer and have them use a thinner foam in the seat.

Nov 14, 2014 | Cars & Trucks

1 Answer

Drivers side seat belt will not extract in 2004 Mazda 3 . Can't adjust height , just clicks like it caught on something seat belt is not tangled up


it is possible a return spring failure in the bottom unit in which case the unit will have to be replaced . Best have it checked out at a service dealer centre

May 09, 2014 | Cars & Trucks

1 Answer

I have just purchased a 1997 Ford Fiesta Chicane, and I don't know how to lower the drivers seat? There are two handles on the front of the seat that adjust the position (forwards and backwards) But...


Hi Chris,Are you sure there are adjustments for height in your vehicle? The controls are usually visible and not hidden. If you don't have that facility, and need it, go visit a breakers yard and buy a couple of seats that are equipped with those adjustments and fit them to your vehicle.Regards Johngee10

Jul 23, 2011 | Ford Fiesta Cars & Trucks

1 Answer

How do iremove front seat from a 1997 honda accord


1. Make sure you have the anti-theft codes for the radio and the navigation system, then write
down the frequencies for the preset buttons.
2. Tilt the steering wheel all the way up and telescope it all the way in.
3. '04-07 models passenger's seat: Carefully insert the tip of a small screwdriver (A) through
the hole in the back of the front seat belt lower anchor cover (B) and into the hole in the
front seat belt lower anchor (C). Unlock the lower anchor by pushing in on the screwdriver.
Remove the screwdriver, and then detach the front seat belt anchor plate (D) and anchor
cover from the lower anchor.4. Slide the seat all the way forward, then remove the seat track end covers from the back of both seat tracks.5. Slide the seat about half way to the rear so you can access the seat mounting bolts. If equipped with the driver's 8-way power seat, fully raise the seat.
6. If equipped with a side airbag, disconnect the negative cable from the battery, and wait at
least 3 minutes before removing the seat. 7. Remove the bolts securing the front seat. 8. Lift up the front seat, then detach the harness clip and disconnect the connector.
If equipped, the seat heater connector on the 2-way power seat and passenger's
manual seat. '04-07 models, disconnect the seat position sensor subharness connector on the
driver's manual height adjustable seat and the driver's 8-way power seat.
9. With the help of an assistant, carefully remove the front seat through the front door opening. 10. Install the seat in the reverse order of removal, and note these items:
Apply medium strength type liquid thread lock to the front seat mounting bolts
before reinstallation.
Make sure each connector is plugged in properly.
Tighten the seat mounting bolts to the specified torque in the sequence shown.
Slide the seat all the way back and tighten then slide it forward and
tighten Before attaching the lower anchor bolts, make sure there are no twists or kinks in
the seat belts. 04-07 models passenger's seat: The triangle marks on the anchor plate and
the lower anchor must face the same side. Insert the anchor plate into the lower
anchor, and make sure that it is locked securely. If equipped with a side airbag, reconnect the negative cable to the battery. Enter the anti-theft codes for the radio and navigation system, then enter the radio station presets. Reset the clock. Your all done. Drink a cold beverage and enjoy the rest of your weekend! hope this helps. Dave

Jun 16, 2011 | 1997 Honda Accord

1 Answer

I'd like to have my driver's seat on 2006 Honda Pilot go back further than the power switch allows. Is there a way to remount the seat so I can get another inch or 2?


not realy possible unless you put a differant seat to like an Accord in which you have to have it fitted for your SUV cause the Accord seat could be lowwer then the SUV seating it could also be just right if you are tall enough and rather larger then me to say I am 5'6" a friend of mine had a job similar done and he left the seat as is cause he is like 6'2" and works fine for his hight and wieght also the Accord seat has things that his did not like massager, heat , center back adjustment and hight adjustment

Apr 04, 2010 | 2006 Honda Pilot

1 Answer

Owner of a 1997 Honda Accord LX....the front seats won't stay in the 1st locking position?


look under the seat, check that the locking arms on both sides are free and not sticking, you may what to lube them with wd 40, here a picture to help explain what i mean, this seats are 2 way power which use motors to adjust height and recline and up and back are manually adjusted, hope this is helpful.9c588b8.gif4b94472.gif

Feb 19, 2010 | 1997 Honda Accord

1 Answer

2007 Nissan Versa Hatchback & driver's seat height adjustment


you have to have the plug on the floor to add the new seat .It plug in to the electric make work ore you have to have the dealer do this for you if not there, Do web search on Junk Yard dog,com for one your cars that year that been crash see you get the eletric seat half price then what the dealer has.
You have post what you need year make model on the site. You have post what you wanted alos the kinda seat it is.
But you need the plug to hook up first.
seat are bolted on 4 nuts screwed the bottom the floor and normal has plug for electric seats
Hope this give you idea what your looking for

Jul 26, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

I NEEDED THE 2001DODEGE CARAVAN SPECIFICATION


Hi,

2001 Dodge Caravan Performance Features -3,301 cc 3.3 liters 6 V engine with 93 mm bore, 81 mm stroke, 9.3 compression ratio, overhead valve and two valves per cylinder
-Unleaded fuel
-Fuel economy EPA highway (l/100km): 9.8
-Multi-point injection fuel system
-Main 76 liter unleaded fuel tank
-Power: SAE and 134 kW , 180 HP @ 5,000 rpm; 210 ft lb , 285 Nm @ 4,000 rpm
2001 Dodge Caravan Handling & Driving Features -ABS
-Two disc brakes including two ventilated discs
-Spacesaver steel rim under body spare wheel
-Strut front suspension with stabilizer bar independent with coil springs , beam rear suspension with stabilizer bar rigid with leaf springs
2001 Dodge Caravan Exterior Features -Body side molding
-Front and rear body color bumpers
-Driver and passenger power heated black door mirrors
-External dimensions: overall length (mm): 4,803, overall width (mm): 1,996, overall height (mm): 1,750, wheelbase (mm): 2,878, front track (mm): 1,600, rear track (mm): 1,626 and curb to curb turning circle (mm): 11,460
-Complex surface lens halogen bulb headlights
-Double sliding minivan side door
-Remote control operation opening rear ¼ windows
-Metallic paint , gloss paint , pearl paint
-Fixed rear window
-Tinted glass on cabin, rear and side
-Weights: curb weight (kg) 1,842, gross trailer weight braked (kg) 907 and max legal load (kg) 772
-Windshield wipers with variable intermittent wipe
2001 Dodge Caravan Interior Features -Air conditioning with rear outlet
-Fixed mast antenna
-Manufacturer's own audio system
-Automatic drive indicator on dashboard
-Below seat storage under passenger seat
-Cargo capacity: all seats in place (liters): 433, all seats removed (liters): 4,154 and third row seats removed (liters): 1,291
-Clock
-Dashboard full console with open storage box
-Delayed/fade courtesy lights
-Cruise control
-Front seats, rear seats and 3rd row seats cup holders
-Door ajar warning
-Door pockets/bins for driver seat and passenger seat
-Floor covering: carpet in load area
-Driver and passenger front airbag
-Bucket seat
-3-point reel height adjustable front seat belts on driver seat and passenger seat
-Front seat center armrest
-Glove compartment
-Height adjustable two head restraints on front seats, rear seats and 3rd row seats
-Internal dimensions: front headroom (mm): 1,011, rear headroom (mm): 998, front hip room (mm): 1,440, rear hip room (mm): 1,722, front leg room (mm): 1,031, rear leg room (mm): 930, front shoulder room (mm): 1,588 and rear shoulder room (mm): 1,643
-Low fuel level warning
-Low washer fluid level warning
-Internal button power locks
-Power steering
-Front power windows with one one-touch
-Front reading lights
-3-point reel height adjustable rear seat belts on driver side and passenger side
-Bench one-piece two rear seats
-Rear view mirror
-Upgraded cloth/velour seat upholstery
-Seating: seven seats
-Six speakers
-Plastic steering wheel
-Tachometer
-3-point reel third row seat belts on driver side , 3-point reel third row seat belts on passenger side , lap static third row seat belts on center side
-Front facing bench removable one-piece third row seats with capacity three
-Driver and passenger vanity mirror
-Ventilation system with recirculation setting
Thanks.

Jun 18, 2009 | 2001 Dodge Caravan

1 Answer

Front seat adjustment 1965 Mustang


see if you can re-drill the hold down holes back 2"

Mar 28, 2009 | 1965 Ford Mustang

1 Answer

Front seat springs


the spring is for height adjustment. all other functions will still work. the only fix is to replace the seat frame which is very expensive. you can actually still adjust the height but not while you are in the seat your weight will keep it from raising. Just remove the spring so it doesnt jam under the seat and everything else will continue working fine.

Dec 28, 2008 | 2004 Volkswagen Jetta

Not finding what you are looking for?
2010 Honda Accord Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...