Question about Citroen C8

1 Answer

Alarm keeps going off key fob wont work

Nothing on the steering column works ie lights, indicators horn and the fuse box in the engine bay burn out replaced fuse box n still having the same problem

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Definitely there's a short circuit in your wiring harness, I suggest you to check wiring harness starting from the steering column removing it's covers carefully afterwards you can inspect under the dashboard. Also check the wires starting from battery to the fuses and the main harness which goes inside to the dash board area. Definitely you will get an idea where is the fault.

Posted on Apr 16, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76630 Answers

SOURCE: horn wont blow

the problem is the rotating contact that connects the horn to the steering column wiring harness, this part is called the clock-spring contact, u must remove the steering wheel to change the part out.

Posted on Dec 17, 2008

  • 15 Answers

SOURCE: 2004 Camry horn is not working

check for broken wires the neagative is by the horn button in the steering wheel has air bag ever been replaced in steering wheel if so the wire may have not been plugged in

Posted on Dec 27, 2008

  • 1 Answer

SOURCE: 1999 toyota corolla Horn doesn't work.

Usually the wire from the steering wheel is Green w/Red and the wire to the horn from the fuse box is White. There is only one fuse, sometimes shared with the emergency lights. Check to see if there is power to the horn itself with a volt meter.

Posted on Dec 30, 2008

CMV9
  • 594 Answers

SOURCE: the horn in my 2007 Dodge Calibre does not work.

there should be a fuse under the hood in the engine compartment it looks like a black box it is a relay and there is no way of checking if they are blown unless you replace it....

Posted on Aug 20, 2009

  • 7 Answers

SOURCE: Audi A4 2003 Alarm Problem

There is a few things to do check the door switches that control dome lights, check wire down by the skid plate when you get oil changed there is a sensor for the starter there if it is stolen the alarm will go off or just take a BAT and BEAT the living **** out of your horn and call it good like I am going to. I hope this helped or will help I recommend an aluminum bat vrs. wood

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start the car and put it into drive the horn goes on, when I shut the car off the horn sounds! wont go off until I disconnect the battery


You could pull the horn fuse, that should kill it. The horn fuse is hot all the time. Two possibilities, one is security system, the other is problem with horn switch or wiring in the steering column.
The horn switch is ground for the control side of horn relay. Part of key fob security horn beep, is also a ground wire. In the diagram, you can see the two wires, The one for fob, take it loose, see if that stops the horn sounding by accident. Don't leave any live wires hanging loose, use electrical tape or something to insulate. I don't know if taking that one wire loose will cause any problems or not, I guess you can try it and see?
Of course, you still want the horn switch to work normally.
26194649-r04ygfu41agzwd0alecunp5o-5-0.jpg

May 14, 2016 | 1999 Oldsmobile Cutlass

1 Answer

Ignition was not working the key wont go in,after it was fixed the horn wont work what could be the problem?


horn fuse is blown, locate fuse box, sometimes there are 2 , one in car and 1 under hood, engine compartment.
use your cars manual to see horn fuse and replace with same fuse.
If the fuse is burned out, replace it. Try the horn again. Check your car owner's manual for the location and type of fuse. Check whether there is any debris obstructing the horn button on your steering wheel that may be preventing the horn from sounding

How to Fix Car Horn

Jan 25, 2016 | Cars & Trucks

3 Answers

Where is the fuse for horn and signal on a 99 mercedes 430e


most fuses are in the engine bay depending on what side the steering wheel is it should be in the engine bay just under windscreen when you take the lid off the fuse box under the lid there should be a plan telling you where each fuse is located on the board

Dec 02, 2014 | 1999 Mercedes-Benz E-Class

1 Answer

2011 murano horn doesn't work


it will be in the horn contact /ring/pin under the steering wheel. probably no contact to complete the circuit .

Aug 20, 2014 | Cars & Trucks

1 Answer

Cruise control not working, air bag light on, horn wont beep


This vehicle has a part called a "clockspring" that is located in the steering column beneath the steering wheel. It is the contact unit for the steering wheel controls and the air bag wiring in the steering column. Sounds like to me that you have a bad "clockspring" and it needs to be replaced. The part is available aftermarket from many parts stores so you don't necessarily have to go back to the dealer for the part. The part is not extremely hard to replace, however, it may not be suitable for a DIYer (requires steering wheel puller). You may want to take it to a trusted repair facility and have them repair it for you. The labor is approximately 1.5 hrs at the given shop rate. Good luck. Hope this helped. Here are a couple of websites.. one for instruction and the other for parts pricing.
Instructon on repair. & Chrysler Forum with info.

Used part on Ebay & New @ Mopar Wholesale

Jan 07, 2014 | Chrysler Concorde Cars & Trucks

1 Answer

2001 GMC SIERRA 2500 HD alarm horn stopped working, reg horn dose'nt work either. Alarm lights still go off when activated through key fob. Checked all fuses and wiring, driving lights not working...


You need an ohm meter and check to see if ther is power at the horns and lights. There is no programming that turns off the horn on the steering column. But I have one of these trucks and had the same problem with the lights and horns but it didn't happen at the same time. My lightbulbs burnt out and the actual horns under the bumper did to. Hope this helps.

Jun 29, 2011 | GMC Sierra 2500HD Cars & Trucks

1 Answer

I have an 04 s4 and recently the horn goes off and gets stuck in that orinentation. it wont shut off unless i pull the horn fuse or battery lead. when the horn gets stuck on the hazards also come on n stay...


methinks a stray wire in aftermarket alarm system. Most horns are negative switched (ie they are operated by earthing a wire on the steering column) and would not interfere with positive-switched items such as the hazard lights. Does your car have an aftermarket alarm?

Sep 17, 2009 | 2004 Audi S4

1 Answer

2001 TA WS6 - Horn and key fob not working


Horn problem is either bad horns or failed clockspring behind steering wheel which is the connection for the airbag and horn buttons.

Mar 29, 2009 | 2001 Pontiac Firebird

3 Answers

Battery


I've had this exact problem before when being jumped off. The fob DOES NOT make it stop. We removed the fuse that goes to the horn. As soon as your battery gets recharged from the alternator, the fob will work again and the alarm will quit sounding. The only pain about removing the fuse is that the cruise control will not work until you put it back.

Feb 20, 2009 | 2004 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...