Question about 2008 Ford Fusion

3 Answers

None of my brake lights are working - 2008 Ford Fusion

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 2,899 Answers

Brake light fuses, and relay should be under the dash on the drivers left side.
If fuse is not the problem, there's a switch on the brake pedal arm, that controls the brake lights. The switch may need to be adjusted or replaced.
Hope this helps.

Posted on Apr 20, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Thinking that you have already checked your fuses. The next thing to check is your brake light switch. This can be found near the top of the brake pedal. Twist a quarter turn anticlockwise and it should come out, plug off the wires and cross the two wires and if the lights come on you need a switch. If not go back to your fuses

Posted on Apr 16, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If you checked the bulbs of course then the next thing to check is the brake switch behind the brake pedal. No working switch, no brake lights. Also fuses should be checked and any realys on the circuit.

Posted on Apr 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights wont turn on when the petal is pushed but the driving light work


if the third brake light works check the turnsignal switch. if none of the brake lights light i would check the fuses and than the brake light switch

Dec 04, 2011 | 2002 Subaru Impreza

1 Answer

Could a bad brake light switch work for brake lights,and the 3rd or high light not work?


if the brake light switch is faulty none of the brake lights will work.......cheers

Sep 19, 2011 | 2002 Chevrolet Avalanche

1 Answer

My brake lights will not function on my 2000 grand caravan.All of the bulbs are new my rear lights work my reverse lights work but my brake lights will not


The bulbs could still be the problem since they are double filament bulbs.If your high brake light work but not the low ones the replace the bulbs.If none in the rear work then you may need a brake light switch(on the brake pedal linkage).If this is not the case the check for power to the brake light side of the bulb and repair the broken brake light wire.

Oct 06, 2010 | 2000 Dodge Caravan

1 Answer

None of the brake lights are working on my 2006 mitsubishi galant. I changed both bulbs . I checked brake switch with an ohm meter. I checked all the fuses. Do the brake lights operate through one of the...


Check the wiring going to the chassis holding the brake light bulbs. In the trunk when setting groceries and other items inside someone may have knocked a wire loose.
When you say none of the brake lights did you mean turn signals and parking lights as well on thefront and back?

Apr 16, 2010 | 2006 Mitsubishi Galant

2 Answers

Why dont my brake lights work


if no brake lights work, it's either the fuse or the brake light switch on the brake pedal

Sep 30, 2009 | 1986 Toyota Supra

1 Answer

Third brake light works, but brake lights L/R don't.


faulty turn signal switch would effect brake lights if its faulty.because brake lights and turn signal feeding off same circuit.

Jul 10, 2009 | 2001 Volkswagen Beetle

1 Answer

2006 Mazda 3 Hatch brake lights not working


ur breask switch may be not working or wire is loose....also check ur globes,,,,some globes carry 2 functions.....normal light and brake light,,,,,so i assume you brake light globes need checking

Mar 07, 2009 | 2004 Mazda 3

2 Answers

Brake Lights are not working.


check the switch itself,on the pedal,most likly if you drive this model car too long with a bad brake switch,it WILL damage the transmission!!

Dec 22, 2008 | 2004 Jeep Grand Cherokee

1 Answer

Brake lights


do you have a 3rd brake light like on that is on the roof or in the rear window? if so does it work?
the brake lights are usually a 2way bulb so just because the lights work doesn't mean that brake lights will. if the 3rd brake light works replace the brake light bulbs if none of them work including your 3 brake light. check into having your brake switch changed. that is the switch under the brake pedal. when it is pressed the brake lights come on and when released they go off. if the bulbs do not fix the problem than try the switch.

Jul 19, 2008 | 1987 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...