Question about Toyota Tacoma
Installing brake controller in 2006 toyota tacoma. brake pedal wire is 12v ground until pedal is pressed. need it to be an open circit
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your dealer is not lying to you.
All of the Toyota product line with ABS has this phenomenon. What Toyota has done is incorporate "Brake Force Distribution" into the braking system. What that means is there is now a sensor on the brake pedal/brake rod, going to the master cylinder. The sensor measures how FAST you press on the brake pedal. This activates the ABS pump, and supplies more brake fluid, harder, to reduce the time needed, such as a "panic stop"; the pedal travel is much longer than you are used to, because of the way they have to measure the speed of the rod being depressed. In actuality, this system is much better than the old system, as it also prevents wheel drag. It just takes a while to get used to. Really, there is nothing to worry about, I explain this same thing to my customers every week.
I hope this helps you out.
Thanks for choosing FixYa for assistance.
Posted on Mar 05, 2009
SOURCE: trailer brake controller problem
I found the problem. Talking with a technician from the controller company, we determined that it was a fuse problem. I found that the fuse to the CHMSL was blown.
Posted on Jun 30, 2009
SOURCE: toyota tacoma 2007 stereo wiring
Radio 12v blue/yellow + radio harness
Radio Ground brown - radio harness
Radio Ignition gray + radio harness
Radio Illumination green + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- pink - purple +,- radio harness or amplifier
RF Speaker +/- lt. green - blue +,- radio harness or amplifier
LR Speaker +/- black - yellow +,- radio harness or amplifier
RR Speaker +/- red - white +,- radio harness or amplifier
Notes: If equipped, the amplifier is on the passenger side rear cabin wall.
Posted on Oct 28, 2009
The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!
Posted on Jul 22, 2010
A dim or dead display is a very common problem with the 05-09 Tacoma. The console is very prone to internal failure. I offer a reasonable repair service with a lifetime guarantee, check it out: www.autoclockrepair.com
There is a bunch of useful info there. Drop me an email if you have questions, thanks!
Posted on Nov 26, 2010
Tips for a great answer:
Jul 06, 2016 | 2006 Toyota Tacoma
Oct 15, 2012 | Cars & Trucks
Apr 19, 2017 | 2005 Toyota Tacoma
Sep 01, 2010 | 2001 Ford F150 Styleside SuperCrew
Mar 30, 2010 | 2004 Toyota Tacoma
Mar 13, 2010 | 2006 Toyota Tacoma
Mar 05, 2010 | 2006 Toyota Tacoma
Sep 11, 2009 | 2006 Toyota Land Cruiser
Apr 16, 2009 | 2002 Ford F250 Super Duty SuperCab
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: