Question about 2008 Saab 9-3

Open Question

Change side marker light - 2008 Saab 9-3

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get front marker housing light off


change your light switch and you have to remove your headlight to take out the marker light

Apr 18, 2014 | 1994 Honda Accord

1 Answer

Change front turn signal


The side marker light must be removed in order to get at the turn signal light.
There are two screws holding the side marker light which is situated above the turn signal.
Open the hood.
Remove the phillips head screw at the top of the side marker light.
Using a long #2 Phillips screwdriver, remove the screw on the outside of the side marker light. This can be seen by looking between the lower side of the side marker light and the top side of the turn signal.
The side marker can be moved.
The turn signal has one screw on the top of the fixture that must be removed.
Slide out the turn signal fixture. There is a small feature on the lower front corner of the turn signal fixture that you must note to properly reinstall the turn signal.
In order to get to the bulb, rotate the bulb socket 1/4 turn CW or CCW. The bulb socket is loose.
The bulb is simply pressed into the socket.
Not sure of the type, but it can be found at your locale auto parts store.
The bulb is used in several places on the 1994 GC, so get apacket with two, if possible.
Assembly in reverse. Be careful not to overtighten the screws as they are replaced.

Mar 29, 2011 | 1994 Jeep Grand Cherokee

2 Answers

My rear marker/ running lights are out and i need to know how to get to them


Signal and Marker Lights Removal & Installation To Remove:
  1. Remove or disconnect the following:
    • Screw from the side marker lamp.
    • Side marker lamp from the front and/or rear bumper fascia.
    • Bulb/socket from the side marker lamp.
    • Bulb from the socket.
To Install:
  1. Install or connect the following:
    • Bulb to the socket.
    • Bulb/socket to the side marker lamp.
    • Side marker lamp to the front and/or rear bumper fascia.
    • Screw to the side marker lamp. Tighten to 2 N.m (18 lb in ).
prev.gif next.gif

Jan 08, 2011 | 2002 Pontiac Sunfire

1 Answer

How do I change the front side marker light bulbs?


Bi-Xenons - 6000K D1S
High Beams - Osram Nightbreakers H7
Fogs - PIAA H11 Yellow Ion
Cornering Lights - Osram Nightbreakers H3
Front Park Lights - High-Powered LEDs with built-in resistors
Front Signal Lights - Sylvania Silverstar 7507A ST (Silver Bluish but lights up Amber)
Front Sidemarkers - InviSilver W5W (Silver but lights up Amber)
Rear Signal Lights - P21W Stealth Bulbs (Silver but lights up Amber)
Reverse Lights - Sylvania Silverstar 7506ST or Error-Free LEDs
License Plate Lights - C5W Error-Free High-Powered LEDs
  • Turn the engine off and approach the side of the porsch with the burn-out side-marker light. If you are replacing both, start at either side; the replacement procedure is the same.
  • 2 Remove the screws from the plastic fender liner. Peel back the liner to access the area behind the fender.
  • 3 Reach your hand inside to gain access to the side-marker light's backing. Push the backing forward to release the side-marker lens; it's held in place by small clips.
  • 4 Grab the lens on the outer side and turn it over to access the back. Gently turn the bulb to release it from the plastic lens.
  • 5 Pull the bulb straight out to remove it from the electrical socket. Insert a new bulb, but do not touch the glass part of the bulb with your hand.
  • 6 Push the new bulb into the side-marker lens. Turn it clockwise to install it. Push the side-marker lens back into place. Apply gentle pressure to the lens to pop it back into its mount.
  • 7 Replace the screws along the edge of the fender liner.


  • Dec 04, 2010 | 2006 Porsche Cayenne

    1 Answer

    How to change side marker lightfor grand vitara


    Pop the bonnet, look at top of the grill where it's fitted to the cross member.
    Prise out the 4 plastic fixings and gently ease out the grill.

    Take out the bolts holding the headlamp and change bulbs

    May 11, 2010 | 2002 Suzuki Grand Vitara

    2 Answers

    How to change the little front lights beside the main front light


    Side Marker Lights
    1. If visible, remove the attaching screws and partially remove the front side marker light lens.
    Fig. 7: To change a side marker bulb with no attaching screw, protect the body with a rag and gently pry the lens assembly outward . . .





    Fig. 8: . . . until the entire assembly is free of the body and access to the bulb socket is achieved


    2d8805f.jpgde76af4.jpg

    Aug 30, 2009 | 1994 Mazda 323

    1 Answer

    Had a problem with a right, amber side marker on right side


    Usually one of the holes in the marker light where screw goes in, has metal contact where screw meets light, but if not, and they are not push in wire connection type from behind, then just run your white wire up through hole in housing, and bare the end & tighten it up under screw holding light to body. White should be ground, brown should be power.

    Jul 02, 2009 | 2004 Dodge Ram 2500

    3 Answers

    Replace parking/marker bulb front pass 98 Jeep Grand Cherokee


    look in between the marker and headlights its a screw there screw it out

    Apr 04, 2009 | 1998 Jeep Grand Cherokee

    1 Answer

    I ned to change left side marker light up front bulb 194na how do i get assembly out on 1996 mercury grand marquis


    I changed the front left marker light on side of headlight assembly by unscrewing the screw on the far back of it. then i just pulled it off. it felt like it was gonna break but it came off just fine

    Mar 22, 2009 | 1996 Mercury Grand Marquis

    1 Answer

    How to change front driver side 2004 g35 coupe marker light


    Just pop out the side marker from where the marker meets the fender well and push outward on the side marker. It has a metal clip retaining it to the bumper.

    This entry was in January, most likely you figured it out already.

    Jan 19, 2009 | 2004 Infiniti G35 Sport Coupe

    Not finding what you are looking for?
    2008 Saab 9-3 Logo

    Related Topics:

    11 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saab Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    rgbypoet

    Level 2 Expert

    166 Answers

    Are you a Saab Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...