Question about 2001 Daewoo Lanos

1 Answer

Daewoo laganza head bolt sequence - 2001 Daewoo Lanos

Posted by on

  • yadayada
    yadayada May 11, 2010

    instructions courtesy of exppert "GINKO"





    You remove air filter and other parts.
    Then you remove head cover.
    Then you unscrew and remove the head,
    Clean a bit the block
    Replace gasket.
    Screw back the head
    Follow head tourqe settings and screw orders on diagrams when mounting back the head.

    The whole thing is not thst easy as it may seem, if you want to DIY you will need to buy the Haynes manual for your car. There you find a step by step procedure with pictures.

    Here is a repair manual.

    Also enquiry to Haynes.Haynes manuals are the best.

    Here is how to replace head gasket on a Honda,
    with lots of pics, procedure is the same, torque values and screwing order are different. It is not a job for absolute beginners


    Do not forget to rate the solution

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

Start with bolt in middle section and do up bolts in snail shell order
1.8L, 2.0L & 2.2L DOHC & SOHC = 18Ft-lbs, +90degrees, +90deg, +90deg

Posted on Jun 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cable on power window for 2000 Daewoo Laganza broke in driver's door. How do I repiar?


you need to replace the window regulator there not made to repair

Jul 09, 2012 | 2000 Daewoo Leganza

1 Answer

What are the torque specifications and tightening sequence for cam journal and cylinder head for 2001 daewoo nubira 2.0 :(


  1. The torque settings for the cylinder head bolts on a daewoo ...

    www.answers.com > ... > Categories > Cars & Vehicles > Asian Car i need how much pression (torque) for head daewoo nubira 2001 2.0 ... What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and ...

Apr 15, 2011 | 2001 Daewoo Nubira

1 Answer

What is the torque settings for the cylinder head bolts for a daewoo laganza


Hi your Leganza head is tightened down in 4 stages, stage 1 25nm St 2 +90deg, St3 + 90deg, St4 + 90deg.

Oct 05, 2010 | 1999 Daewoo Leganza

1 Answer

What are the specs on head bolts


2001 Daewoo Nubira 2.0L MFI DOHC 4cyl

The Head Bolt Torque ...

Torque sequence ------------------------- Front | 10 6 2 3 7 | of | 9 5 1 4 8 | Engine --------------------------

Step 1 - Torque to 18 ft/lbs Steps 2 - Turn 90 degrees Steps 3 - turn 90 degrees Steps 4 - turn 90 degrees Recheck final torque in sequence


Hope helps (remember rated and comment this).

May 27, 2010 | 2001 Daewoo Nubira

1 Answer

Engine not firing


i do not know give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual the two different Daewoo and then you be able to see the different wish you the best of luck Michigan Man.

Jan 25, 2010 | 2000 Daewoo Leganza

1 Answer

What is the torque pressure for a 01 daewoo matiz 800cc head


2001 daewoo matiz 800cc

This is the best info I have.

Just as important as the torque values is the tightening sequence. Since modern engine heads are soft alloys this is key. The bolts are tighten down maybe half the final value on the first pass and then tighten down fully on the final pass.
The Sequence is; 7 1 3 5 8 4 2 6 bolts 5&6 are the flywheel side of the engine Torque values Stage 1. 40-45Nm first pass Stage 2. 85-90Nm. second pass

Since you have the head removed look for carbon build up on the pistons.
You may want to get a car service manual from the library or on the internet.

May 11, 2009 | 2000 Daewoo Lanos

2 Answers

Head bolt torque settings


is that for the 1.5 lt engine

Apr 19, 2009 | 2000 Daewoo Lanos

1 Answer

Head screws


2001 Daewoo Lanos Cylinder Head Bolt Torque Specs
Torque bolts in sequence
(looking down on the engine from front of car)

belts 1 3 9 5 7 trans
belts 2 4 10 6 8 trans

Step 1: 18 ft.lbs. (25 Nm)
Step 2: Plus 60 degrees
Step 3: Plus 60 degrees
Step 4: Plus 60 degrees
Step 5: Plus 10 degrees

Sep 22, 2008 | 2001 Daewoo Lanos

Not finding what you are looking for?
2001 Daewoo Lanos Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...