Question about 2004 Toyota Camry

Open Question

2004 Camry automatic door locks dont work

Have to manually lock & unlock front seat doors. This happened progressively. First it was the passenger side door, then drivers side only worked sporatically. Now, neither one works...

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: automatic door locks will not work

Probably the door actuator - a part inside the door that activates the lock, particularly if neither the interior lock switch or the remote do not lock the door.  Once the doors lock the horn will beep again - the lack of beep indicates the vehicle is not secure.

Posted on Mar 15, 2009

Ad
alzhane
  • 1 Answer

SOURCE: Need to reprogram door locks for 2004 Toyota Camry

I recently replaced the battery on my 2004 Toyota Camry. When I installed new battery the door locks will not stay unlocked once opened with remote. How do I reprogram?

Posted on Apr 07, 2009

  • 10865 Answers

SOURCE: 2004 sienna toyota van electric door not working

The first thing to check is the fuse that controls that door's motor. Look in your manual for the fuse chart. Determine where the fuse panel is and which fuse it is. Pull that fuse and take a close look to see if it has blown. If so, replace it with a new one of the same amperage

Posted on Apr 11, 2009

  • 3 Answers

SOURCE: 1991 Toyota Camry Automatic seatbelt harness

I would say its the door jam sensor telling your car the door is open is shorting out causing it to not create a connection when all the way released

Posted on Apr 29, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 2004 Camry front driver door lock will only lock/unlock with key

Remove the door panel and reconnect the plug going to the front driver door lock or, if you can hear the motor trying to engage the door lock cam when you press the lock/unlock remotereconnect the door lock lever bar

Posted on Jun 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are the fuses for the power dock locks on a 2006 montecarlo06ss


DR/LCK fuse 25 amp . located in the I/P block
Fuse Block - I/P
In the right front kick panel

Power Door Locks System Components
The power lock system consists of the following components:
• Body control module (BCM)
• Driver door lock cylinder switch
• Front passenger door lock cylinder switch
• Driver door lock switch
• Front passenger door lock switch
• Door lock actuators in each of the doors
• DR LK Fuse 20-amp
Door Lock System Controls
The Power Door Lock System is controlled by the body control module (BCM) and can be activated by any one of the following:
• A door lock switch lock or unlock actuation
• A door lock cylinder switch unlock actuation
• A keyless entry transmitter actuation
• An automatic door lock actuation (Personalization function)
• An automatic door unlock actuation (Personalization function)
Door Lock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the lock position, it switches the door lock actuator lock control circuit to voltage. Since the lock actuator unlock control circuits are at ground potential within the BCM, the door lock actuator motors transition to the lock position.
Driver Door Unlock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the unlock position, it switches the driver door lock actuator unlock control circuit to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the left front (LF) door lock actuator motor transitions to the Unlock position.
The driver door lock actuator unlock control circuit is a dedicated control circuit used only for the driver door lock actuator motor. This is done so that the driver door may be unlocked by itself using a keyless entry transmitter or an automatic door unlock function (if programmed).
Passenger Door Unlock Operation
When the body control module (BCM) detects a transition of either of the door lock switches to the unlock position, it switches the door lock actuator unlock control circuits to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the passenger door lock actuator motors transition to the unlock position.
The door lock actuator unlock control circuits are dedicated control circuits used only for the passenger door lock actuator motors. This is done so that the driver door may be unlocked separate from the passenger doors using a keyless entry transmitter or an automatic door unlock function (if programmed).

Mar 23, 2017 | 2006 Chevrolet Monte Carlo

1 Answer

Opening the drivers door doesnt automatically open the passangers door


Some vehicle locking systems allow a single button press to unlock the driver's side door and require a second button press to unlock the passenger side door. Likewise, use of the key to unlock the driver's side door does not automatically unlock the passenger side.

Mar 25, 2014 | Dodge Stratus Cars & Trucks

1 Answer

I have 98 Camry Le and the door locks lock automatically shortly after the doors are unlocked and the alarm will set also. What could be the problem? Alarm Control Box?


if you use the keyless entry to unlock the vehicle & don't open a door within 30 secs.the vehicle will automatically lock & the alarm will reset,if you unlock it with the key this shouldn't happen.....cheers.

Sep 01, 2011 | 1998 Toyota Camry

2 Answers

1999 GMC Sierra The electrical door opener stopped working. The door continues to automatically lock when the truck is driven but I must manually unlock it to get out. The remote door lock and unlock...


The relay is working fine if the automatic locking system is working. The module for the automatic door locks has a circuit to lock the doors upon shifting the vehicle to drive. The circuitry has a relay built into it that unlocks the doors when parked so that module is not fuctioning properly for the unlocking mode

Apr 21, 2010 | GMC Sierra 1500 Cars & Trucks

3 Answers

Driver side door doesn't lock or unlock with the remote. The rest of the doors work fine.


Does the Driver side door lock and unlock from the lock switch inside? If not then you have a bad motor or bad connection to the lock/unlock motor inside the door.

Jan 08, 2010 | 2004 Toyota Camry

1 Answer

2004 Camry front driver door lock will only lock/unlock with key, the remote and lock button locks and unlock all locks fine except for the front driver side door lock. You have to either use the key or...


Remove the door panel and reconnect the plug going to the front driver door lock or, if you can hear the motor trying to engage the door lock cam when you press the lock/unlock remotereconnect the door lock lever bar

Jun 09, 2009 | 2004 Toyota Camry

1 Answer

2002 Jeep Grand Cherokee electric door locks not operatin


the passenger door switch pack controls all door locks as this is the receiver from the remote you might want to try this and also check connections

Jun 07, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
2004 Toyota Camry Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...