Question about 2001 Jeep Grand Cherokee

Open Question

Clearing an p0700 code - 2001 Jeep Grand Cherokee

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me if Volvo (mine is a 2001 V-40 wagon) have opened their TCM to be able to be read/cleared by dealers/shops other than Volvo?


you can clear codes and such by removing the positive battery terminal for a few minutes a p0700 can be cleared by the most basic reader are you sure malfunction has been repaired and codes are not locked

Jun 16, 2017 | Volvo Cars & Trucks

2 Answers

I have a 2009 Chevy Avalanche LS and I got the P0700 code, how easy is this to fix? where is the TCM located? If this is a dealer service how much?


DTC P0700: Transmission Control Module (TCM) Requested MIL Illumination
The transmission control module (TCM) uses the (GMLAN) to signal the engine control module (ECM) that the TCM is requesting malfunction indicator lamp (MIL) illumination. This happens when the TCM has determined that a failure affecting emissions has occurred in transmission control system. When the ECM receives the message from the TCM, DTC P0700 will set.
DTC P0700 can not be cleared from the ECM until the related TCM codes have been cleared.
This is something best left to a qualified repair shop , doesn't need to be the dealer ! AMMCO could fix it . This code is telling that other codes are stored in the transmission control module . Need a professional type or factory scan tool to check these . As to how much it will cost , no telling without knowing the codes in the TCM !

Apr 28, 2017 | Cars & Trucks

1 Answer

2hat does code #P0700 mean on a 2007 Chevy Silverado. 4x4 mean


DTC P0700: Transmission Control Module (TCM) Requested MIL Illumination
DTC P0700 can not be cleared from the ECM until the related TCM codes have been cleared.

The transmission control module (TCM) uses the (GMLAN) to signal the engine control module (ECM) that the TCM is requesting malfunction indicator lamp (MIL) illumination. This happens when the TCM has determined that a failure affecting emissions has occurred in transmission control system. When the ECM receives the a message from the TCM, DTC P0700 will set.
You don't say which engine your's has ! Or which transmission .
Automatic Transmission - 4L60-E/4L65-E/4L70-E

You need to have TCM checked for codes .

Dec 22, 2016 | Cars & Trucks

1 Answer

I have a 2003 chyrsler 300m it went in limp mode codes p0700. P0340 p0344 p0430 p0888 came up cleared the codes and now it knocks.


clearing codes wont correct the problem and limp mode is designed to protect motor and transmission - p0700 is a transmission problem
P0700 Transmission Control System Malfunction p0340 is camshaft position sensor malfunction
https://www.obd-codes.com/p0340 p0344 is also a camshaft position sensor circuit problem
P0344 Camshaft Position Sensor Circuit Intermittent your p430 is a cat converter problem
https://www.obd-codes.com/p0430 and p0888 is transmission relay problem these reasons are limp mode the knock can be fuel not burning correctly or a lower engine knock can mean you damaged a piston

Nov 08, 2016 | Cars & Trucks

1 Answer

Error codes P0700, P0455, P0888 how to fix


the p0455 is an evap system code gross leak possible loose gas cap or broken vent line.the p0700 is a transmission code are you having any shifting problems if so you need to get a tester that can access the tcm(trans control module).i do not know what the p0888 is can't seem to find it.if your not haveing any driveablity problems check your gas cap and clear the codes.code info is available at obd-codes.com

Oct 06, 2012 | 2006 Chrysler 300

2 Answers

I have a 2011 dodge caliber and it isz throw a c0700 code could u tell me what this is


P0700 DODGE - Transaxle Control System Malfunction

Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Possible causes - Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module

Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.

P0700 DODGE Description The transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transaxle controls.
CLEAR THE CODES AND SEE IF IT RESETS. MOST LIKELY NOT A PROBLEM

Sep 07, 2011 | 2002 Dodge Grand Caravan

1 Answer

6 months ago driving on interstate, working the truck hard trans temp @ 200 shifts into netural finally goes into high. Clear codes, finish my trip. Sense them short trips it will stop at light and shift...


P0700 juist means that the transmission has had a fault occur and the then a fault code was set for that fault, the P1711 is the actual fault. Read about this fault code at the link, there is a bulletin on this for the faults.

Jun 21, 2017 | Chevrolet C2500 Cars & Trucks

1 Answer

HOW TO FIX CODE P0700


1. Disconnect the Transmission Control Module (TCM) and get a resistance reading from pin 60 to pins 16 and 17, should be 1-3 ohms.
2. If the resistance is high, check the wiring from the TCM to the solenoid pack. If OK, replace the solenoid pack
This is a code for the poertrain control module recieving an error from the transmission control module, you need to clear the p0700 code from the Powertrain Control Module (PCM).

Mar 13, 2011 | 2007 Saturn Aura XR Sedan

1 Answer

P1153 insufficient switching p0700 1996 tahoe


P0700 - Transmission Control System Malfunction, clear the code and see if it comes back, all this code is, is the TCM (trans control module)
telling the check engine light to come on for a possible trans fault, many times it is a false code and means nothing is wrong unless it has another trans code stored with it like a shift solenoid for instance.

P1153 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 2 Sensor 1, You would be pretty safe to assume the O2 sensor for cylinder bank 2 ahead of Cat converter is defective.Bank 2 is the side opposite the bank that #1 cylinder is located in.

Apr 13, 2009 | 1997 Chevrolet Tahoe

1 Answer

OBD2 DTC P0700 &P0733


P0700 Transmission Control System Malfunction P0733 Gear 3 Incorrect ratio INFO FROM http://autorepair.about.com/cs/troubleshooting/l/bl_obd_7.htm
hope this helps.....good luck!

Dec 25, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...