Question about 2000 Pontiac Grand Prix

2 Answers

Blower motor only works on low

2003 hyundai santa fe the blower motor stopped working on medium and high speeds just blows on setting 1. replaced the resister and still same problem

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,164 Answers

Have u tested the blower motor switch? also look for a burned connector at the switch, if u find one replace the switch and the connector, any GM dealer will have the connector

Posted on Jun 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

If you replaced the resistor, you're halfway there. I've posted how to replace the switch in the other questions

Posted on Oct 19, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2010 Dodge Avenger the blower was only working on the to low and medium prop mob up with penny work for a while to penny fell out won't work now


2009 dodge avenger blower motor works on low, medium ...

www.fixya.com/.../t21143783-2009_dodge_avenger_blower_motor_wo...
Nov 2, 2013 - 2009 dodge avenger blower motor works on low, medium low,medium high but not high. Resister has ... SOURCE: Dodge 2001 Stratus - A/C fanonly blows on High ... working. Jan 04, 2010 ' 2003 Dodge Durango · 1 Answer ...

Oct 29, 2015 | Dodge Cars & Trucks

1 Answer

Blower Motor only works on high and resistor changed


sounds like it's the switch; but it is important to see whether the fan spins freely or else the switch or resistor block will fail again. the most common reason for these failures is that the motor drags and pulls too many amps, thus overheating the connectors and wires.

Mar 21, 2013 | 2006 Hyundai Santa Fe

1 Answer

Air conditioner wont work on high


There is a seperate blower motor relay for the high setting. check that first. It could be in the fuse box under the hood but i think it is near the blower motor... behind the glove box.

Jul 19, 2012 | 2003 Hyundai Santa Fe

2 Answers

Heater fan only works on hight. 2004 hyundai santa fe


This problem is related to faulty blower motor resistor.The resistor is the part which controls the blower motor to work on required speeds.But if resistor fails then motor will work normally but will not work on selected speed like slow and medium .In this case replacing the resistor should help.To locate the resistor open your glove box and roll it all the down take off the panel in behind the resistor will be top right hand side.This should help.Thanks.Helpmech.

Jan 16, 2011 | 2004 Hyundai Santa Fe

2 Answers

I have a 2004 santa fe, the A/C blower only works on high. There is power from the control head to under the dash, but where it goes into the fan there is no power except for when it is on high


How about when the heat is on? You might have 2 reostats, one for heater one for A/C.The reostat controls blower speed Most cars only have one ,but who knows seen stranger thjngs,I have had bad blower motors only work on high.My guess would be a reostat.

Mar 15, 2010 | 2004 Hyundai Santa Fe

1 Answer

On my santa fe the heater wont turn on. I have


It could be your blower switch, but more than likely it's a resistor that is usually a part of the blower assembly, and it operates the speeds. Doesn't cost much but can be tricky installing. If you had one or two speeds not working, initially, eventually all may stop. If fan stopped working and all speeds had been operating, then you may have a bad wire or blower motor. Also, check your manual for fuses, as there may be a compartment inside the vehicle as well as one under the hood.

Dec 27, 2009 | 2002 Hyundai Santa Fe

1 Answer

Blower motor stopped working one speed at a time


Your Blower Motor Resistor Pack is defective. Replace it.

Sep 25, 2009 | 2003 Hyundai Santa Fe

1 Answer

Heat only when switch is on high


replace the blower motor speed control resistor.

Mar 06, 2009 | 2004 Hyundai Santa Fe

2 Answers

Blower Motor


It's in the engine compartment on the passengers' side on the firewall.

Nov 16, 2008 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2000 Pontiac Grand Prix Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...