Question about Chevrolet Cars & Trucks

Open Question

1997 olds cutlass supreme sl evap purge solenoid location

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
savdragon
  • 37 Answers

SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?

You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Posted on Mar 19, 2009

Ad
dburns60
  • 410 Answers

SOURCE: I need to replace turn signal switch on 97 olds cutlass supreme.

Disconnect the battery to do any service on the steering column or front radiator areas.

Posted on Jun 30, 2009

longbow243
  • 103 Answers

SOURCE: 2007 SILVERADO V6 EVAP PURGE SOLENOID

The evap purge solenoid is located on the intake manifold. The evap vent valve is located on the side of the fuel tank. If you have a P0449 or P0452 (I think) DTC, it will be the one on the tank that you need to replace.

Posted on Sep 01, 2009

  • 20 Answers

SOURCE: Describe your EVAP Purge Solenoid Circuit Fault

Try going to http://www.ls2.com/boggs/dtcs/DTC%20P0443.htm

Posted on Nov 08, 2009

roniecon
  • 6918 Answers

SOURCE: 1997 olds cutlass supreme The security light is

Open ,and shut the doors,and the hood,and the trunk,then set the anti-theft,leave it set for 5 minutes,then disarm the anti-theft,and then try and start the vehicle.

Posted on Jun 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a purge cannister on a 1997 Oldsmobile cutlass supreme sl


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Feb 20, 2017 | 1997 Oldsmobile Cutlass Supreme

1 Answer

1997 Oldsmobile Cutlass Supreme SL Fuse Box diagram


On this website, you find fuse box diagram and description for Oldsmobile Cutlass Supreme (1997)

Oldsmobile Cutlass Supreme 1997 fuse box diagram Auto Genius

Mar 10, 2012 | Cars & Trucks

1 Answer

What is code p0440


EVAP Emission Control System Malfunction.
A code P0440 could mean one or more of the following has happened:
The gas cap is not installed or working properly The purge solenoid has failed The canister is plugged and not working properly Possible Solutions With a P0440 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back. Inspect the EVAP system for cuts/holes in tubes/hoses Inspect for damaged or disconnected hoses around the Evap purge solenoid Check and/or replace the sensor Check and/or replace the purge valve Have a professional use a smoke machine to detect leaks

Sep 29, 2011 | 1997 Oldsmobile Cutlass Supreme

1 Answer

97 Olds Cutlass Supreme SL. Transmission 4T60E (M13). Which solenoid is the 1-2 shift solenoid? I am a Guru on FixYa. Done all except internal transmission stuff. Help me out here. Its my car. I posted...


I had that same problem on an Aurora. I don't remember which one, but I do know that I called a gm dealer and had them fax me the diagram location. The internet's diagrams were all too general.

Aug 31, 2011 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Firing order for spark plug wires on 97 cutlass supreme SL?


1997 Oldsmobile Cutlass Supreme 3.1 liter V-6 VIN "M"


9_27_2011_10_49_33_pm.gif


Hope this helps (remember to rate and leave some comment about this free answer).

Aug 26, 2011 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Where is my purge solenoin on my 1997 Saturn SL1 and what tools do I need to replace it?


PURGE SOLENOID VALVE LOCATED ON THE INTAKE MANIFOLD.FOLLOW THE PCV VALVE VACUUM HOSE CONNECTS TO PURGE SOLENOID VALVE.PURGE SOLENOID VALVE WILL HAVE VACUUM LINE THAT CONNECTS TO EVAP CANISTER TO REAR OF FUEL TANK AREA.

May 12, 2011 | 1997 Saturn SL

2 Answers

3.1 engine, evap switch, 2 side hoses, where does the 3rd one go


one hose goes to the intake manifold, the other goes to the evap switch,there are two valves, one a purge valve and the other a evap switch,the purge valve has one hose going to the intake and the other hose goes to switch, then then switch has another hose that goes to evap canister,eveh better heres a diagram, hope this helps,7765b4b.gif

May 15, 2010 | 1996 Buick Century

1 Answer

I need to replace turn signal switch on 97 olds cutlass supreme.


Disconnect the battery to do any service on the steering column or front radiator areas.

Jun 30, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

A/c on my 1997 olds cutlass supreme sl not cooling properly.help!


either your system needs freon in it or your radiator could be low on water or antifreeze try looking at radiator first this would be cheaper on you hope this is your problem.qan hope this helped you.

Jun 25, 2009 | 1997 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...