a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sunroof Description and Operation (One Connector System)
This diagnostic procedure is to be used for the 1 connector Sunroof System that combines the sunroof control module with the sunroof motor/actuator.
The Sunroof System consists of the following components:
• BATT MAIN 2 Fuse 50 A
• Body control module (BCM)
• RAP relay
• S/Roof Fuse 20 A
• Sunroof module (includes sunroof motor/actuator)
• Sunroof switch
The Sunroof System is controlled by the sunroof switch and the sunroof motor/actuator assembly.
When the ignition is turned to RUN or ACCESSORY, or when the retained accessory power (RAP) system is active, the body control module (BCM) applies a ground to the RAP relay in the instrument panel (I/P) fuse block. This activates the RAP relay and allows battery positive voltage to be applied through the SUNROOF Fuse to the sunroof module. Ground for the sunroof module is supplied from G302.
The sunroof can be placed in 3 preset positions:
When the sunroof switch is placed in the OPEN position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof motor/actuator then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the full open position.
When the sunroof switch is placed in the VENT position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof module then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the VENT position.
When the sunroof switch is placed and held in the CLOSED position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch close signal circuit. The sunroof module then applies voltage to the sunroof motor close control circuit and applies a ground to the sunroof motor open circuit. The sunroof motor then closes the sunroof.
The sunroof can be placed in any preferred open position when:
• The sunroof is in the fully opened position by pressing and holding the sunroof switch in the CLOSE position until the panel has reached the desired position then release the CLOSE switch in order to stop the sunroof
• The sunroof is opening, it can be stopped by momentarily pressing either side of the switch.
The sunroof control module, sun roof actuator, and the sunroof motor are integral parts of the sunroof module assembly and are not service separately.
Your best bet , take it to a qualified repair shop or buick dealer .
Here's a description the sun roof
Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof module
• Sunroof switch
• Sunroof motor, with 2 hall effect sensors and limit switch
• Sunroof window
• Sunroof sunshade panel
• Power supply for the sunroof module: RAP 25 A
• Ground G402
The override function is used when needing to force a closing of the sunroof window. To override the system:
Turn ignition to ON.
Rotate the sunroof switch to the close position.
The sunroof switch data 6 circuit, or override circuit, will become grounded at the sunroof module. As long as the sunroof module sees this input, it will continue to slide the sunroof window to close, regardless of the other sunroof switch data circuits inputs.
Suzuki Grand Vitara sunroof window Questions & Answers ...
www.fixya.com > ... > Tags > sunroof window > Cars & Trucks > Suzuki Suzuki Grand Vitara cars & trucks sunroof window questions and answers. ... i have2006 vitara and my to eletric windows on both left and right doors are starting ... WILL NOT CLOSE THE BUTTON DOS NOT WORK HOW CAN I CLOSE THE ...
you may have to strip out the roof lining to gain access to the sunroof component if you cant pull the sun visor free , dont keep pressing the power button as could at the least blow the fuse , at worst burn out the motor
the shade may be related to sunroof not closeing completely, the most common reason is the track is broken , this is the most common reason for when the sun roof doesnt close or jams when opening or closing its always the track breaks, the way to check this is to easy the headliner needs to be dropped and removed and then the glass from sunroof removed then unbolt track and drop down into car and check the track linkage and arms and track and see whats broken, note there are no replacement parts only motor or cable, as far as the parts that always break like an arm on the track this is not replaceable the track needs to be replaced, hope this helps , good luck.
03 Jeep Liberty sunroof wont close. I have 4 sunroof buttons; Open, Close, Vent and ASC. Open and Vent buttons are working fine. Close button is not responding. ASC button is flashing red and green but does nothing when pushed. I have no way to get it closed
make it go back to the open position,look down the side of the tracks in the roof that the sun shade slides in and you will probable find the guides for the sunshade are jamming up the tracks. only way to replace them<4 one in each corner> is to remove the glass section and then close sunshade that will give access to the 4 guides which are available from dealer as a kit
a solution that i had is that if you can open your sunroof without it opening ur shade try that then fold the shade by pushing between or in the middle of it and popout the shade. this works but try not to push to hard or you can break the plastic runners on the side of the shade. check to see if nothing is in the way of the runners. then put back the back part first then slide it all the way to the back then, do the other part and clip them back together
(there might be a little metal piece that pushes your shades back so check that first to see if its there first)