Question about 2003 Jeep Grand Cherokee
My cruise control light goes on but the cruise control still doesn't work.
Ok, the '03 Jeep Grand Cherokee uses a small vacuum line to control the servos. Since your light comes on, it's obviously getting power. 9 out of 10 times it's the vacuum hose.
Pop the hood and look on the passenger side towards the back for the engine coolant reservoir. It's most likely underneath it so you may have to remove the res. Check the vacuum hose and all vac. connections then check the electrical connections. If that's not the problem, check the cruise control connection to the throttle linkage.
If that still doesn't do it, you may need use scan tools and diagnostic procedures that are out of the scope of home mechanics.
Wish ya luck!
Posted on Oct 08, 2012
Check your fuses. Your cruise control most likely blown a fuse. Good luck.
Posted on Jul 05, 2012
It must be the part on the transmisiont that either went bad or the connections are bad
Posted on Jun 18, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 18, 2015 | 2002 Jeep Grand Cherokee
Apr 05, 2010 | 2004 Jeep Grand Cherokee
Nov 14, 2009 | 1999 Jeep Grand Cherokee
Sep 14, 2009 | 1999 Jeep Grand Cherokee
Apr 26, 2009 | 2003 Jeep Grand Cherokee
2,310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: