Question about 2003 Chevrolet Silverado 1500

Open Question

2003 chevy 1500 no parking lights in front

Front parking lights don't work,but blinkers do.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Jay_from_Ma
  • 99 Answers

SOURCE: 2003 duramax 2500hd brake lights stay on when lights are on

You may have faulty wiring for your trailer lights. Look under the back of the truck where the wiring harness leads to the trailer wiring harness. Usualy it is a 3 way plug in the harness. Try unpluging the harness from the trailer wiring and just plug the other 2 wires into eachother
Hope this works for you!

Posted on Dec 17, 2008

  • 2 Answers

SOURCE: '05 Chevrolet Malibu - Front Right Blinker is not Working

You need to check for power coming out of the turn signal switch with a test light, or voltmeter. On older Chevys, the R/F turn signal wire is dark blue. Check the color of your wire at the bulb socket, then locate the turn signal switch connector, and probe that color wire with the ignition switch on, and turn signal switch in the right position. If you have power coming out of the T/S switch, you have bad connection, or open circuit between it and the bulb socket.

Posted on Sep 02, 2009

  • 1632 Answers

SOURCE: 2004 chevy 1500 brake lights not working

check fuse under hood, batery terminals coroded wire at harness if everything fails run a hot wire to rear brake line with an interuptor.
check the swich under the foot brake.
vitally

Posted on Sep 09, 2009

  • 521 Answers

SOURCE: Brake lights on a 2003 chevy silverado 2500HD wont work.

same bulb but 2 seperate elements. wiring diagram u should be able to obtain from your local auto parts store like autozone(preferred)

Posted on Sep 23, 2009

dttech
  • 4803 Answers

SOURCE: Igot a 1987 chevy blazer

There is a short to ground in your tail/park light circuit. If your blazer is equipped with a trailer hitch, the first place I would look for the problem is in the trailer wiring. Otherwise, the circuits need to be traced from the fuse to the tail lights and/or all of the park lamps to find out where the short circuit is located. Whatever you do, DO NOT put a larger fuse in the fuse block. This will result in your vehicle burning to the ground. (I have seen this several times and it isn't pretty)

If you have a full-size Blazer, it should be a 20 Amp fuse. This fuse also powers your cigarette lighter, so check there also for a problem.

If you have an S-10 Blazer, it should be a 20 Amp fuse. This fuse also powers the courtesy/dome lamps.

Posted on Dec 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 chevy venture rt.front parking light&turn light don't work replace bulb&socket


The rapid flashing occurs because of the light problem. If the 20A PARK LP fuse in the underhood fuse block is OK, the front marker lamps and the park lights should turn on when you set the headlamp switch to PARK. If the 10A T/SIG fuse in the instrument panel fuse block is OK, and the ignition switch is on, moving the turn signal multi-function switch to signal a right or left turn should cause the turn signals to flash. If this doesn't happen, check for a missing ground connection to the socket you replaced and check to be sure the replacement lamp was not forced into the socket backwards (it happens).

Sep 17, 2012 | 2003 Chevrolet Venture Passanger

1 Answer

1996 chevy 1500 truck when i turn left turn signal on back up lights come on and when i turn the right turn signal on the emergency blinkers come on. The front blinkers work correct.


Hmmmmm.....anybody messed with the wiring in the rear to do some trailer towing? Apparently current is getting into the back-up light wiring.You have a burned,melted or bare wire back there maybe. don-ohio

Nov 09, 2011 | Chevrolet 1500 Cars & Trucks

2 Answers

Parking break light is on & Chimming When P. Break is released


On your parking brake assembly is a single wire switch. You can unplug it, but you will have to remember not to drive with it set. To replace the switch the whole assembly will have to come out. The switch is about $20 and labor should run about two hours. Good Luck

May 20, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

Chevy venture blinker


turn the turn signal on and then just get out of the van and look at the front one and then the back one

Oct 27, 2008 | 2003 Chevrolet Venture Passanger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...