Question about 2004 Subaru Baja

Open Question

04 subru baja how can the tail light be taken off

How can the tail light cover be taken off to change the bulb

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: tail light bulb burned out, can't remove ***'y. to replace.

twist the tail light out, it rotates up from the back then slides out. took me about 30 minutes to realize that last summer, i feel ur pain, its 28 here now.

Posted on Dec 16, 2008

  • 1 Answer

SOURCE: tail light bulb burned out, can't remove ***'y. to replace.

Remove the 2 bolts as in the user manual. Slowly wiggle the tail light top then bottom as you pull straight back. Not slowly. There are 2 pin clips attaching it to the rear quarter panel.

Posted on Jan 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights dont turn on


1. Replace your car tail light. You will need working gloves to protect your hand during the process. Of course you will also need a screwdriver, cleaning cloth, wire brush, and a good set of tail light bulbs.

2.Understand that different models of car have different set of tail light covers. Naturally, these covers will require different un-installation procedures. So, determine if you can dismount the cover from the outside or you will have to dismount it from the trunk of the car.

3.Determine how to dismount the tail light cover, carefully detach it from the car. You can use different sets of screwdrivers for this. Be careful not to break the tail lights cover. The important thing is you must be able to expose the bulb in order to extract it.

4.Remove the tail lights cover, unscrew the bulb from its socket. Sometimes you will have to press a little and twist the bulb in order to extract it from the socket.

5.Extract the bulb, bring it to your favorite auto parts and accessories store and find the exact match of your tail light bulb. Be sure to get the correct match because if you use other types of bulb, your tail lights may not work properly.

6.Reinstall the tail light bulb, clean the aluminum casing of the tail light. Wipe the socket and wiring with a dry cloth. You can use wire brush if there are corrosion around the tail light casing.

7.Put the good bulb on the socket. You might still need to apply a little pressure on the socket before you can install it fully.

8.Reinstall the tail light bulb, replace the cover of the tail lights and secure it tightly.

9.Test to make sure your new tail lights are working. Start the engine and apply the brakes. You can ask someone to see if the tail lights are really working.

resource: http://www.wikihow.com/Fix-Car-Tail-Lights

Aug 27, 2012 | 1998 Buick LeSabre

1 Answer

My tail light went out in my 04 kia rio and i cant get to the bulb to change it


In order to change the bulb you must dismantle the tail-light assembly from the vehicle. In common cases, this is an easy procedure. First, open the trunk. Second, look behind the tail-light and look for any screws that may be in the bottom of the trunk behind the tail-light assembly (some carpeting may hide screws). Third, unscrew any screws, once all visible screws are off, and the assembly won't easily come off, there may be push in connectors, if so give the assembly a hard tug back and the assembly should pop off. Fourth, you will see the stock bulb connector wiring with the bulbs, simply turn the bad bulb by the fitting 1/4 counter clockwise and it should come out of the assembly. Fifth, simply pull out the bulb from the adapter, and push in the new one, the install procedure is simply reverse in steps. Good Luck.

Jun 23, 2011 | 2004 Kia Rio

1 Answer

How do I change a brake light bulb in a 1999 c70 volvo?


Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician

Jan 27, 2011 | 1999 Volvo C70

3 Answers

Tail lights do not work on a 2000 lexus rx 300 bulbs are fine, all other lights work fine


You may have a fried fuse. Look in your owners manual to find out which fuse it is in the fuse box diagram. If that is the problem make sure to use the same amperage fuse to replace the burned one with. I fried fuse is usually a sign that you have a short somewhere. But they can also fry for other reasons such as excess moisture somewhere. Sometimes they just burn from age and fatigue. It may solve it to just replace the fuse, but if there really is a short, the new fuse will fry too.

Dec 29, 2010 | 2000 Lexus RX 300

1 Answer

HOW DO I CHANGE TAIL LIGHT LENS IN 04 SONATA AND WHAT TOOLS DO I NEED


To change the taillight assembly open the trunk and pull the cover back on what ever side you need to change. You will see either wing nuts holding the taillight in or 10mm nuts holding the light in. Remove the bulbs and unbolt the taillight assembly and remove replace in reverse.

Sep 03, 2009 | Hyundai Sonata Cars & Trucks

5 Answers

Tail light bulb burned out, can't remove ***'y. to replace.


Remove the 2 bolts as in the user manual. Slowly wiggle the tail light top then bottom as you pull straight back. Not slowly. There are 2 pin clips attaching it to the rear quarter panel.

Apr 09, 2009 | 2003 Subaru Baja

1 Answer

Mazda 3 tail light on, brake light not on


The bulb actually has two seperate elements in it.
That is why the tail light works fine.

If you take the bulb out you will see the seperate elements.
Change the bulb and it should be fine.

Jan 09, 2009 | 2004 Mazda 3

2 Answers

Tail light bulb burned out, can't remove ***'y. to replace.


twist the tail light out, it rotates up from the back then slides out. took me about 30 minutes to realize that last summer, i feel ur pain, its 28 here now.

Nov 27, 2008 | 2003 Subaru Baja

Not finding what you are looking for?
2004 Subaru Baja Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...