Question about 2005 Ford Taurus

1 Answer

Brake system data error what does it mean - 2005 Ford Taurus

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just fixed my error. My abs light came on every time I turned on the wipers, then in the message center after several times showed "brake system data error" turned out to be a loose ground and that fixed the problem. . .

Posted on Jan 12, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when my 2008 trailblazer LT stabilitrac service light comes on?


Service Stability System Message The message center displays the service stability system message when any one of many VSES-disabling DTCs is set. The EBCM sends a serial data message to the IPC requesting this display.
It means there is a problem an till you get it fixed the stability control system is disabled ! ( EBCM ) electronic brake control module Has detected a problem an set a DTC - diagnostic trouble code in it's memory an had the message displayed !
Vehicle Stability Enhancement System (VSES)
The vehicle stability enhancement system (VSES) provides added stability during aggressive maneuvers. Yaw rate is the rate of rotation about the vehicle's vertical axis. The VSES is activated when the electronic brake control module (EBCM) determines that the desired yaw rate does not match the actual yaw rate as measured by the yaw rate sensor.
The desired yaw rate is calculated by the EBCM using, primarily, the following inputs.
?€¢
The position of the steering wheel


?€¢
The speed of the vehicle


?€¢
The lateral, or sideways acceleration of the vehicle

The difference between the desired yaw rate and the actual yaw rate is the yaw rate error, which is a measurement of oversteer or understeer. When a yaw rate error is detected, the EBCM attempts to correct the vehicle's yaw motion by applying brake pressure to one or more of the wheels. The amount of brake pressure which is applied varies, depending on the correction required. The engine torque may be reduced also, if it is necessary to slow the vehicle while maintaining stability.
VSES activations generally occur in turns during aggressive driving. When braking during VSES activation, the pedal may pulsate. The brake pedal pulsates at a higher frequency during VSES activation than during ABS activation.


It

Jun 19, 2015 | 2008 Chevrolet Trailblazer

2 Answers

I have a 2000 Corvette and the Check Engine light came on, power was decreased and it said check Active Handling System...what does this mean and what kind of problems does it create?


Have the codes checked. There are to many possibilities for your car to list. Repost with the codes. Kind of problems it creates is lost power and handling.

Apr 18, 2015 | 2000 Chevrolet Corvette

1 Answer

I have a code u1418 implausible right wheel distance signal received (2oo8 jeep compass)


did you read the fsm on this,

here

https://www.techauthority.com/en-us/products/?year=2008&model=548

not sure which book is best,ask jeep

the correct book walks you through all steps.

seems its abs (distances calce errors)
or the sensor is bad or dirty or loose or damaged
looking at it can do WONDerS

might even be bad brakes there
why not get the brakes checked by a real shop
ASE shops rule
ABS NEEDs good brakes FIRST.
1 case in point a grabbing brake, or other odd behaviour)
ever google search seems not
one guy had bad wheel bearing
a good shop (why not use one) would check that corner 100% bearing, shocks, sensor, brakes
and tie rods, (all means, ALL)
if tire hops moving and braking abs will be upset. ABS is not genius level yet.

all it knows is the sensors read odd.!!!!
and even compares them to others and true veh.speed
why not get a real mech, in the loop
an ASE SHOP.
it can also be network errors on the can buss network, that means using a REAL scan tool.
or you miss ALL THAT. (id bet no net error here)

the ABS sees odd readings right side sensor RF and RR
try to think like a dumbb computer (no joke)
if it sees one sensor , different and not braking and not turning
or one locks up, or varies. oddly braking.
oddly is he key word,
or IT tries to prevent a tire on right side from skidding but cant... (dah bad pads ,etc)
warped rotors??????
see how that works??
bad brakes
bad sensors (means wires there)
skipping tires
wobbling tires,rotors, bearing SHOT.
dead shocks (hopping like a bunny)
bad belongs.
sticky pads, burned up. or ???? not same match to others (do no mix brands up)
worn pads to metal back plates
overheated brakes
wobbing rotors.
(loose suspension parts right side)

do i need go gone on naming everything a spinning braking tire can do,wrong,, why? take a class on brakes then ABS,???
check for bad wires.
check brakes.
check bearings.
even loose lug nuts, really.
wrong size tire
bad tire, treads not same 4 corners.

or get car serviced ,that ASE guy knows what to do.


when abs fails , try to not think ABS
first (sure, wires)
try to think ABS saved my life by telling me
braking is bad before he human noticed it.!!!
it does this very well, this early warning
but is dumbb...
it can't know the wheel bearing is at
dangerous state of being../ just odd data, it sees.
(funny "odd" tone wheel, data from the sensors)
see choppy data... confusing to the non AI brain
it's not 2050 year.?


i did not list all possible points of failure
its too huge.
(ok pinched brake line)
get car serviced, why not?

or caliper slider pins sticking.... oops...

Jul 02, 2014 | 2008 Jeep Compass

1 Answer

What does ESP light mean on a cls 500 Mercedes Benz


The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty.
You should access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.

Check & replace if necessary the brake pedal switch placed above pedals on the support.

If the problem still occurs you should access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS & ESP ECU, and reset it.


tdisline_516.jpg

Feb 10, 2012 | 2006 Mercedes-Benz Mercedes Benz CLS500

1 Answer

Yellow warning indicator lamp of a tringle with an excalmation point in the center and a counterclockwise arrow arround the triangle ---what does it mean?


Check & replace if necessary the brake pedal switch placed above pedals on the support.
If the problem still occurs you might access the ABS & ESP ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS ECU & reset it.
tdisline_516.jpg
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: brake pedal switch, front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.
I'm convinced that your brake pedal switch is faulty because the glow plug warning sign went ON after ESP warning light. Just replace the brake pedal switch, see if rear stop lamps light when press the brake pedal, and test the car on the road.
Good Luck!

Sep 06, 2011 | 2005 Audi A4

1 Answer

When i pull the code up on my 1992 park avenue it blinks once then blinks twice. what does this code mean?


This is code 12 and it means "System Normal"
Here is the complete list of fault codes for your Buick
GM common codes for OBD1 (for vehicles made before 1995)
12 System normal
13 oxygen sensor circuit open
14 coolant sensor high resistance or shorted
15 coolant sensor circuit low or open
16 direct ignition system (DIS) fault in circuit
17 cam position sensor fault
18 crank or cam sensor error
19 crank sensor circuit fault
21 tps sensor out of range
22 tps sensor signal voltage low
23 intake air temp sensor out of range, low
24 vehicle speed (vss) sensor circuit fault
25 air temp sensor sensor out of range, high
26 quad-driver module (computer) circuit #1 fault
27 quad-driver module (computer) 2nd gear circuit
28 quad-driver module (computer) circuit #2 fault
29 quad driver module (computer) 4th gear circuit
31 cam position sensor fault
32 egr circuit fault
33 map sensor signal out of range, high
34 map sensor signal out of range, low
35 idle air control sensor circuit fault
36 ignition system circuit error
38 brake input circuit fault
39 clutch input circuit fault
41 cam sensor circuit fault, igntion control circuit fault
42 electronic spark timing (EST) circuit grounded
43 knock sensor
or electronic spark control circuit fault
44 oxygen sensor lean exhaust
45 oxygen sensor rich exhaust
46 pass-key II circuit or ps.pressure switch circuit fault
47 pcm-bcm data circuit
48 misfire diagnosis
51 calibration error, mem-cal, ecm or eeprom failure
52 engine oil temperature circuit, low temperature indicated
53 battery voltage error or egr or pass-key II circuit
54 egr system failure or fuel pump circuit low voltage
55 a/d converter error or pcm not grounded or lean fuel or frounded reference voltage
56 quad-driver module #2 circuit
57 boost control problem
58 vehicle anti-theft system fuel enable circuit
61 a/c system performance or degraded oxygen sensor signal
62 engine oil temperature high temperature indicated
63 oxygen sensor right side circuit open or map sensor out of range
64 oxygen sensor right side lean exhaust indicated
65 oxygen sensor right side rich exhaust indicated
66 a/c pressure sensor circuit low pressure
67 a/c pressure sensor circuit or a/c clutch circuit failure
68 a/c compressor relay circuit failure
69 a/c clutch circuit head pressure high
70 a/c refrigerant pressure circuit high
71 a/c evaporator temperature sensor circuit low
72 gear selector switch circuit
73 a/c evaporator temperature circuit high
75 digital egr #1 solenoid error
76 digital egr #2 solenoid error
77 digital egr #3 solenoid error
79 vehicle speed sensor (vss) circuit signal high
80 vehicle speed sensor (vss) circuit signal low
81 brake input circuit fault
82 ignition control (IC) 3X signal error
85 prom error
86 analog/digital ecm error
87 eeprom error
99 power management

May 05, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

1998 Lexus Ls vsc light is on want to know what is it


Vcs means "Vehicle Stability/skid Control".Variable Skid Control is a part of your brake system. It is indicating that it senses a problem with your brake system.Get the car scanned at autozone service center.Its absolutely free at autozone to get car scanned.In scanning it will show the error codes as per that you can get the parts replaced.Also if in scanning,if no codes are shown ,then also get your brake system inspected. ----------- This will help.Thanks.Helpmech.

Dec 14, 2010 | 1998 Lexus LS 400

4 Answers

What does the abbreviation ABS mean on my Dash Board of a 1996 Nissan Frontier King Cab truck?


It stands for Anti-lock braking system, and the reason the ABS warning light is on is due to a problem with the ABS system

Sep 20, 2010 | 1998 Nissan Frontier

3 Answers

Abs light stays on, have changed the brakepads


Its not your brake pads. It is your ABS system. Only dealers are certified to work on the ABS systems. I would check all of your fuses prior to sending it to the dealership. You probaby have a bad sensor. Have you drove through water over your bumpers? IF so, then just take it to the dealer because you have shorted a sensor.

Sep 28, 2009 | 1999 Volkswagen Passat

1 Answer

Volvo s60 error code 23 what does it mean


It sound like a bad Yaw sensor,or ABS sensor,both are part of the Anti locking brake system.Have you brake system checked

Jan 08, 2009 | 2002 Volvo S60

Not finding what you are looking for?
2005 Ford Taurus Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...