Question about 1994 Plymouth Acclaim

Open Question

Changing a power steering pump on a 94 plymouth acclaim

Pump does not line up with crank

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 328 Answers

SOURCE: 94 Plymouth Voyager Water Pump

thw water pump stuff you need is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280215d73

The heater stuff is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280216054

Hope this helps! good luck!

Posted on Jan 15, 2009

motor1258
  • 6674 Answers

SOURCE: need to replace water pump on 94 Plymouth Acclaim

Your water pump is driven by your timing belt which should be changed at same time unless it was done recently. If your still thinking of doing it, stop in at local parts store for info on what's involved, parts prices etc., and decide from there. I believe some even give you a step by step print out now too.

Posted on Apr 04, 2009

darkoctober1
  • 1 Answer

SOURCE: need diagram for power steering

r u needing the belt diagram for the power steering,alternator,etc etc...? if so email me at(DarkOctober1@yahoo.com) and i can send u a pic of the diagram i have. i have a 1994 plymouth voyager 3.3l just so u know.

Posted on Jun 10, 2009

motor1258
  • 6674 Answers

SOURCE: plymouth acclaim wont start,no spark,no fuel

Do me a favor and cycle the key to on, then off, then on, then off, then back to on,& leave it in the on position.(not start) Now watch & record any flashes of the check engine light. You will get a number of flashes, then a pause, then more flashes. for example: 3 flashes, pause, then 3 more, would be code 33. It will always be a 2 digit number. 2 flashes,pause then 5 flashes, is code 25. When you get 5 flashes, pause then 5 more, that's code 55 which means end of message. Get back to us with any codes that flash.

Posted on Jun 18, 2009

wracefans24
  • 1985 Answers

SOURCE: how to replace power steering pump in 2000 Plymouth Grand Voyager

you really don't want to do this job!
it's a hard one even with a hoist and the right tools

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 plymouth acclaim lost all power to starter I've replaced starter ignition switch all relays and cleaned battery cables/terminals still have no power to starter any suggestions would be awesome...


The best things you do is to check the relay circuit for a short to ground or voltage. .sometimes when you attempt to start or crank the engine it will be dropping voltage due to short to grounds. ...

Aug 25, 2013 | 1994 Plymouth Acclaim

1 Answer

Plymouth acclaim, the power steering went out a week or so started making a noise wen turning or taking off, I noticed the belt had a crack in it, tried to make it home & the belt just shredded apart,...


well as for the tear on the belt the power stering pump is proably not so good enymore if the pully spin with the belt then it no good and when your put the belt back make sure you got it on right if you crank it and the power steering pulley isint moving then your just gonna shred another belt after another

Jan 18, 2013 | Cars & Trucks

1 Answer

How do you remove the power steering pump from a 2001 Chev Blazer with the 4.3 engine?


4.2L Engine
  1. Remove the air cleaner assembly.
  2. Remove the drive belt.
  3. Install a drain pan under the vehicle.
  4. Disconnect the power steering pressure hose from the power steering pump.
  5. Disconnect the power steering cooler hose from the power steering pump.
  6. Disconnect the wiring harness from the wiring loom on the power steering pump.
  7. Remove the power steering pump mounting bolts.
  8. Remove the power steering pump.
  9. Remove the power steering pump pulley.
  10. Remove the power steering pump pulley using Power Steering Pump Pulley Remover tool no. J 25034-C, or equivalent.

Oct 30, 2010 | 1993 Plymouth Acclaim

1 Answer

How do you replace just the pulley on the power steering unit on a 92 acclaim v6


You need to remove the power steering pump and using a powersteering pulley remover, remove the pulley. The puller will grip around the flange on the center hub of the pulley. Some auto parts stores will rent these tools out to save you some money, try Autozone

Oct 16, 2010 | 1992 Plymouth Acclaim

2 Answers

How do i replace the timing belt on my '94 Plymouth acclaim?


I did it twice and if you are fairly skilled it will take 4-6 hours, if you have the V6.
Here is the steps:
1. Move car to a place that can support a jack and engine stand.
2. Disconnect battery
3. Loosen wheel lugs on passenger side front tire
4. Jack car on passenger side to lift wheel of the ground
5. Put a block under the oil pan to support the engine
6. Block car frame on left side
7. Remove left front tire
8. Remove v-belt
9. Remove idler pulley
10. Remove and support air conditioner compressor
11. Remove PS pump if you have one
12. Remove motor mount on left side and vacuum / gas connections connected to mount ( mark bolts as to locations )
13. Remove metal plate on engine ( mark bolts as before )
Tricky bolts are on the PS pump (Remove them through PS pulley holes)
14. Remove 3 plastic covers over timing belt ( mark bolts as before )
15. Note timing marks on overhead cams and crank.If none, make some.
16. Ease pressure off timing belt tensioner
17. Remove belt and replace with new. Trick here is to make sure you get the belt notches lined up. Head cams will shift when you remove the old belt. Do not tighten the belt tensioner fully or it will not perform as designed, it should be snug but be able to move.
END... replace part is backward order and drive away !!!

Nov 16, 2009 | 1994 Plymouth Acclaim

1 Answer

Whre is the power steering pump located?


Hi,
Your engine belt drives this pump, along with some other of your engine components. You should be able to identify a cap on the power steering pump, which is used to check the power steering fluid level.
Hope this was helpful... Good luck!

Oct 06, 2009 | 1991 Plymouth Acclaim

2 Answers

How do I change the fuel pump on my 93 plymouth acclaim, p.s its a 4 cylinder


You will have to drop the gas tank, the fuel pump is sold as a complete pump and module and they are in the tank.

Sep 24, 2009 | 1993 Plymouth Acclaim

1 Answer

Change wather pump 1991 plymouth acclaim


Try (autozone.com ) & sign up for free access to manuals, pictures, step by step instructions plus parts prices. Just enter your vehicle info & go to manuals, click on engine & engine overhaul, then scroll down left side & click on water pump.

Jun 05, 2009 | 1991 Plymouth Acclaim

1 Answer

Need to replace water pump on 94 Plymouth Acclaim


Your water pump is driven by your timing belt which should be changed at same time unless it was done recently. If your still thinking of doing it, stop in at local parts store for info on what's involved, parts prices etc., and decide from there. I believe some even give you a step by step print out now too.

Apr 04, 2009 | 1994 Plymouth Acclaim

Not finding what you are looking for?
1994 Plymouth Acclaim Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...