The battery got disconected now windows dont work tried re program checked fuses nothing now what
You need to do a window reset. Its in your owners manual
This is a quote from the workshop manual
? A driver side window will not fully close automatically under following the conditions:
? The battery has been disconnected during vehicle maintenance or for other reasons.
? The power window main switch connector, or driver-side power window motor connector has been
? Carry out the following procedure to resume operation:
1. Turn the ignition switch to the ON position.
2. Press the driver side power window main switch and fully open the driver side window.
3. Pull up the driver side power window main switch to manual-up position to fully close the driver side window,
and keep holding the switch up at the position for about 2 seconds to complete initial setting.
TWO-STEP DOWN FUNCTION OPERATIVE/NON-OPERATIVE SWITCHING PROCEDURE
? By following the procedure below, the two-step down function is switched to non-operative when it is
operative, and to operative when it is non-operative.
Turn the Ignition on
Within 5 sec
perform the auto open two times
perform the auto close two times
turn the ignition off and within 40 seconds and repeat the above sequence.
Repeat for all the windows.
Aug 14, 2016 |
2007 Mazda 6 2.3