Question about 2010 Nissan Note 1.6

Open Question

To repair rear brakes on a nissan note

How to replace rear drum brakes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
SUL827
  • 93 Answers

SOURCE: Rear Axle Repair/Replacement

Unless the axles are somehow damaged all you will need to replace are the axle seals and the brake shoes themselves,

Posted on Sep 15, 2008

Ad
  • 22 Answers

SOURCE: CANT GET DRUMS OFF BACK BRAKES

If you can spin the drum that means the brake shoes are not tight to the drum so just take a hammer or dead blow and hit the drums a few time that should loosen it up. You can use bolts to push it out but I can't remember what size they were off my head, I know a 12mm socket will fit over it.

Posted on Apr 27, 2009

  • 32 Answers

SOURCE: replace rear brake shoes on 1999 nissan altima and

if the orginal drums there might be a lip of rust and metal buildup that needs to be cleaned off. try also backing the adjuster off to allow the drum to go over the shoes, do the shoes look the same as the old ones, just more materal? Don't forget to adjust the shoes back to the drum so you gte a good pedal feel, and the rear brakes will work properly

Posted on Oct 02, 2009

techbuster
  • 5081 Answers

SOURCE: How does the rear brake drum come off of a 96

Removing the rear brake drums vary little from one vehicle to the next.First,loosen the lugs on the rear wheels,release the hand brake, block the front wheels,jack up the rear and use jackstands.Then remove the rear wheels.Looking at the drum after the wheels have been removed, you will notice two threaded holes one on each side of the axle flange.Give the brake drum a smart rap or two with a plastic mallet or piece of wood and spray the flange w/ WD 40 or brake parts cleaner.Obtain a bolt with the exact size and thread to fit the hole. I found it useful to "borrow" such bolt from around the work area-My favorite is the one fastening a cable or a hoseclamp to the differential.If that don't fit, look around under the hood:there's one there you can use.Thread the bolt into the hole alternating from one hole to the other.The bolt pushes the drum against a flange inside and removes the drum.After work, adjust the star wheel brake adjuster so that the drum turns with hand push with a little drag.

Posted on Oct 17, 2009

elshaddai159
  • 1016 Answers

SOURCE: How to remove rear brake

Hi,

The drum brake should just slid off, but if it is not coming off easily then you have excessive wear in the drum and you will need to de-adjust the brake shoes so that they don't catch on the inside of the drum while you are trying to remove them.

The below shows what you need to do:

7089ffd.jpg

This is the procedure.

e777281.jpg

1685c4a.jpg
If you need further information please let me know.

Thanks

Jason

Posted on Oct 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjustrear drum brake 2009 nissan patrol


drum brakes can be adjusted through a slot at the rear of the backing plate normally at the top. Use a flat bladed screw driver or a special tool used top adjust drum brakes. The secret to adjusting drum brakes is to adjust up till the shoes touch the drum and then hit the backing plate several times with a hammer . This allows the shoes to move into the new position and equalise out. Repeat the process until you get an even contact noise when turning the wheel. Pumping the brakes at intervals while adjusting also helps centralise the shoes into position

Dec 12, 2014 | Nissan Cars & Trucks

1 Answer

How do I get an axle nut off rear hub for 2000 Nissan maxima


here's a link. Repair Guides Rear Drum Brakes Brake Drums AutoZone com there are 2 holes for the bolts to screw in,screw them in even to remove hub,

Sep 27, 2014 | 2000 Nissan Maxima

1 Answer

How to replace slave cylinder on rear brakes of 1400 Nissan LDV


the slave cylinder is next to the master wheel cylinders are back there 2 / 10mm bolts hold them on

Sep 11, 2014 | Nissan 1400 Cars & Trucks

2 Answers

How to remove rear hub on nissan vanette to veiw brake shoes


We do not have this Model in the USA so have no info on it.

Jun 01, 2012 | Cars & Trucks

1 Answer

How to change rear barke shoes


Brake Drums & Brake Shoes Removal & Installation To Remove:
Rear Drum Brakes kia-09-18-7627.gif

  1. Raise and safely support rear of vehicle.
  2. Release parking brake.
  3. Remove rear wheel assemblies. NOTE: If brake drum is stuck, install two 8 mm bolts into threaded holes and tighten evenly.
  4. Remove top return spring, front and rear shoe spring clips and hold-down pins.
  5. Remove anti-rattle spring and adjuster spring. NOTE: Note position of operating lever prior to removal.
  6. Remove bottom return spring.
  7. Remove clip and washer and detach parking brake cable from rear shoe.
  8. Remove brake shoes.
To Install:
  1. Lubricate all brake shoe contact points with appropriate grease.
  2. Place operating level into position on hub.
  3. Install rear brake shoe and connect parking brake cable to rear shoe with washer and clip.
  4. Install front brake shoe and install bottom return spring.
  5. Install hold-down pins and spring clips.
  6. Position operating lever and install top return spring.
  7. Install anti-rattle spring and adjuster spring.
  8. Install brake drum and screws.
  9. Adjust brakes and install rear wheel assemblies.
prev.gif next.gif

Jan 21, 2011 | 2003 Kia Spectra

1 Answer

Adjust rear brakes 1995 Nissan Pathfinder 4WD


if they are disk brakes, they are not adjustable. if they are drums they should auto adjust. if they are not, then there is a problem that you have to pull the tire, then the drum, to diagnose it. you may have to disassemble the brake shoes and springs, and clean and lube the self adjusters

Jul 04, 2009 | 1995 Nissan Pathfinder

2 Answers

Leaking brake fluid from the rear tires.


remove the rear tires and the brake drums and check and see if the wheel cylinders are leaking

Apr 23, 2009 | 2000 Nissan Maxima

2 Answers

Rear brake disc replacement


are your brake pads squeezing the rotor? are your brakes disc or drum? in order to replace pads on disc brakes you need to unbolt the caliper. If you have drum brakes make sure your car is secured and make sure your parking brake isn't on... 

Nov 08, 2008 | 2005 Nissan Pathfinder

1 Answer

Rear Axle Repair/Replacement


Unless the axles are somehow damaged all you will need to replace are the axle seals and the brake shoes themselves,

Aug 14, 2008 | 1999 Nissan Pathfinder

Not finding what you are looking for?
2010 Nissan Note 1.6 Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...