Question about Geo Tracker

1 Answer

I have just replaced my crankshaft in my 94' Geo Tracker 1.6L 16 Valve and hooked all of the wiring back up but when i turn the key to start it not only it doesnt start but the starter doesnt even mak

1.6L 16 Valve Suzuki

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 656 Answers

Make sure batt. cables are tight at the starter and the battery. Make sure the engine to ground frame strap is bolted into the engine and frame. Check for power at the starter on the batt. terminal, the one going to the battery. Check for power at the start wire terminal, the little one, this is done while someone turns the key to start position. Check that power is getting to the other big terminal on the solenoid. If you are getting power at all these places, then the ignition switch may be bad. Don't forget to test the battery itself, and also the alternator could have a short that is draining your power. Hope this helps, plese post solved on fixya.com.So I get credit for a solved problem if it does. If not, check back and give me more info.

Posted on Apr 16, 2014

Testimonial: "None of this worked"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the carbon on 94 geo tracker?


carbon (Slept 3 nights,(on vac 30 day)\
answer 1 wire at a time. or it cross fires.
my guess is you meant changing carbon core
HV spark wires, but the plug wells are like oil pits. (flooded) SUPER COMMON.

(not spark tips carbon-ed up. right)

http://www.fixkick.com/IGN_timing/tune-ups.html#SETS

get he MAG wires and win.! max life and better spark!!!

all G16b do this seen 100s and all C.O.P engines.
1 cause
owners did not do full 60k mile tuneup
per operators guide, lost it have it ask.
the valve lash step, demands a new valve cover gasket set.
if not it will fAIL, it will,like pissn on a sparkplug
bam. like texas talk, i do...sorry

and a cam belt.. forgot that too?
that is fail 2 , in the woods,
or like train light in the tunnel.

not one of those parts last the life of engine
the real reasons tuneups were invented
and why planes dont crash (of ddumbb things like this)

tuneups on this engine, only make long walk home
on other engines, most DOHC. boom head valves bent or far far worse.

if lost
firing order
is
1342

Dec 18, 2015 | 1994 Geo Tracker

1 Answer

93 geo tracker will turn over but wont start unless you pour gas in intake then will continue to run until you kill it. will not start back unless you pour more gas in intake.


Sounds like something is letting the fuel pressure bleed off after the motor is turned off. Can you monitor the pressure? (Requires adapters and gauge.) Trouble shooting will be a little different between the 8 valve or 16 valve motors. (The fuel injecton systems are different.) You might want to go to a Suzuki Forum. (Your Tracker is a rebadged Suzuki.)

Dec 17, 2012 | 1993 Geo Tracker

1 Answer

No just finished a valve replacement on 92 geo tracker 8v eng. set crank to TDC on #4 cyl and the cam to the proper alignment notch on rear valve cover and installed the new timing belt. However after all...


When timing belts are installed, the normal position of the crankshaft is for #1 cylinder to be at TDC. Here is a picture of the timing belt routing and the timing marks.

chuckster57_44.gif

Jun 04, 2011 | 1992 Geo Tracker

1 Answer

I am looking for a free wiring harness manual for


i just purchased a Chiltons manual from O'Rielly's for a 94 tracker its marked SUZUKI (Samurai/Sidekick/Tracker 1986-98) It includes FULL Wiring/cavuum diagrams....Hope his helps
Kevin

Feb 14, 2010 | 1993 Geo Tracker

1 Answer

I have a 1996 geo tracker 16 valve rebuilt a 1990


your timing may be off because of the valve timing. have you seen this done before or you just trying your luck. i really dont know but are all of your sensors the same? is the firing order the same?

Nov 10, 2009 | 1991 Geo Tracker

3 Answers

I need a diagram of engine timing marks for a 1.6 litre engine


1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl

2efa731.jpg

Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...

5a2ee07.jpg

Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

Oct 15, 2009 | 1996 Geo Tracker 2 Door

1 Answer

How to Replace the crankshaft seal on a 1997 geo tracker


remove belts, pull out crankshaft pilley and then pull put seal

Sep 21, 2009 | 1997 Geo Tracker 2 Door

1 Answer

Cant find the inertia switch


there is not one.

submit problem , dont guess.

i have full docs on this car.

you need to say 8vavles or 16 valves or questions are useless .

Apr 22, 2009 | 1994 Geo Tracker

1 Answer

1989 geo tracker


check the starter wire if its good turn the key on and go to the starter with a screwdriver and tuch the small and big wire see if it starts if yes check the wire if clean the all grounds

Oct 29, 2008 | 1989 Geo Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...