Question about 2007 Ford Edge SEL Plus

1 Answer

How to change speed sensor - 2007 Ford Edge SEL Plus

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Ford Expert
  • 211 Answers

Answer by Mike Escue,--- To replace the output speed sensor( i just finished doing mine i bought it from ford for 40 bucks and tax if you put the edge on good size ramps and put on the parking brake remove the entire air box on the front right remove the wheel well cover and locate the black cover on the front of the transmission(behind the raidiator)the output speed sensor is at the botom of the transmission and when you remove the front trans cover and the sensor get a bucket or drip pan handy about 3-4 quarts will come out (it holds 10)mercon V the electrical harness is behind the black cover the say remove the valve body you dont have to i tied a wire to the connector and fished the new one back through the front shaved off a couple of hours that way i am not super mechanically inclined but when ford said 800 bucks to replace it i asked for an exploded view and bought the part told them i would bring it back for them to install later

Posted on Jan 11, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change speed sensors for nissan liberty 1999


speed sensor is mounted on tranny BUT when you change it get ready for a lot of fluid to come out besides that is an easy fix.

Oct 16, 2014 | Cars & Trucks

1 Answer

Po715


I do not believe so . Code p0715 if that relates to your question refers to the turbine shaft speed(TSS) sensor-circuit malfunction===causes wiring--TSS sensor--ECM/TCM
The drive speed sensor is the sensor that works the speedo and sends impulses to the transmission control module to change gears in relation to the turbine speed sensor
This is how the TCM knows when to change ratios in the transmission because of the differences in recorded speeds of the engine torque convertor and the drive shaft

Aug 20, 2014 | 2001 Jeep Cherokee

1 Answer

How to change speed sensor


hello,can you please post a bit more accurate information,ie; speed sensor for vehicle? or engine speed sensor? as the engine speed sensor is usually near the flywheel bell housing,and the vehicle speed sensor is located on the gearbox[3 wire plug that fit's on top] hope this helps,cheers

Mar 29, 2014 | 2002 Ford Escort

1 Answer

99 camry wont shift Code P0500 speed sensor


The problem is a gear internal failure the gear who drive the speed sensor is defect the is why you don't have speed sensor reading. There is a way you can verify that remove the speed sensor drive it with a drill check the dashboard you will see.

Oct 05, 2013 | Cars & Trucks

1 Answer

P0715 changed both speed sensors 2002 hyundai elantra still have same code come up


I suspect that your transmission is slipping, you may not feel it yet but the sensors are picking it up in the relative speed signals from the input and output sensor.

Jun 17, 2012 | Cars & Trucks

1 Answer

How to change the speed sensor


I assume you know the location of the sensor if not, it is located on top of the transmission unit. Disconnect the wire connector, unscrew 2 screws holding the speed sensor the you are done.

Dec 02, 2011 | 1991 Honda Accord

1 Answer

How to change speed sensor on caravan


It depends on WHICH speed sensor you are talking about. Your vehicle is equipped with 6 of them. One Vehicle Speed Sensor, One Transmission Turbine Speed Sensor, and Four Wheel Speed Sensors.

Sep 17, 2011 | 1999 Dodge Caravan

1 Answer

How to change a speed sensor on 2004 chevy surban


That depends on WHICH speed sensor you want to change. The Vehicle speed sensor? a front wheel speed sensor? A rear wheel speed sensor? an input shaft or turbine speed sensor?

Jul 23, 2011 | 2004 Chevrolet Suburban

1 Answer

E300 1994 codes read p0720 and p0500 one is speed sensor and the other is tran speed sensor, we are having prob with tran shifting and various speeds and rpm jumping up then shifting.


try changing the drive shaft speed sensor, sounds like you have a malfunctioning drive shaft speed sensor, change sensor and reset codes and test... e 300 had this problem in 94 and 95 even when they were close to new with very low miles... please rate my help , thanks

Aug 05, 2009 | 1994 Lexus Es 300

Not finding what you are looking for?
2007 Ford Edge SEL Plus Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...