Question about 2003 Honda Odyssey
There may be a mismatch between the trailer wiring and the Odyssey wiring.
Posted on Apr 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2003 Honda Odyssey radio does
If you recently disconnected your vehicle battery, or had it replaced, the code on the radio must be re-entered in order for it to work. It's a security device to discourage theft since you have to have the code to make it come on. The code is printed on a little plastic card in with your owner manual or other papers. You have to enter the code correctly or you will lock yourself out after three trys. This can only be reset by leaving the radio in the on position and the car on (not running, just turn the key to the on position) for and HOUR! I know, I had to do it. Anyway, enter the code and voila! the radio will magically come back on. Write the code down in the manual so you don't have to hunt for the card. A thief may steal your radio, but he probably won't take the manual.
Posted on Aug 26, 2008
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
SOURCE: 2005 Honda Odyssey Fuse Box
If you can't figure it out from the owners manual just call the dealership. Unfortunately, the aftermarket maintenance manuals are not for sale yet.
Posted on Mar 05, 2009
SOURCE: dvd on honda odyssey
I believe this should be undet the hood, inside the secondary under-hood fuse box (the smaller of the two, located on the driver's side).
If I am not mistaken, you are looking for fuse position #5, which is marked as "Premium" and it is rated for 20 Amps.
Posted on Jun 04, 2009
If an audio unit with theft protection is disconnected from electrical power, you must enter a unique code number into the unit or it will not work. This code and the audio unit’s serial number are listed on the anti-theft ID card that comes with the vehicle. If this card is lost, you must obtain the audio unit serial number in order to get the radio code. Some newer vehicles allow you to retrieve the audio unit serial number electronically from the radio. Refer to your owner’s manual for the specific procedure (the following usually will work: Turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.)
. Some older vehicles (model year 2003 and older) require a visit to the dealer in order to retrieve the audio unit serial number. Once you have the audio unit serial number, you can call Auto Customer Service at (800) 999-1009 or have the dealer look up the radio code.
Hope this gets you started on getting it playing.
Posted on Nov 13, 2009
Tips for a great answer:
Oct 09, 2016 | 2005 Honda Odyssey
Apr 09, 2016 | Honda Odyssey Cars & Trucks
Feb 16, 2015 | 2003 Honda Odyssey
Jan 17, 2014 | 2000 Honda Odyssey
Oct 22, 2012 | 2004 Honda Odyssey
Jun 25, 2012 | 2003 Honda Odyssey
Dec 03, 2010 | 2007 Honda Odyssey
Jul 26, 2009 | 2003 Honda Odyssey
Jan 25, 2009 | 2001 Honda Odyssey
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: