Question about 2012 Mazda 3 i Touring 4dr Hatchback 2.0L 4-cyl. 6-speed Manual w/SKYACTIV-G
Open the trunk and you will see screw underneath the carpet.remove the screw and push the light out.remove the burn bulb and replace with same model # . If the bulb is dual (5W-15W) will have different high on the locking pins. place the light back and tight slightly.DO NOT OVER TIGHT, WILL BRAKE THE KIGHT
Posted on Apr 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 01, 2015 | Hyundai Cars & Trucks
Sep 04, 2013 | 2005 Chrysler 300
Sep 23, 2011 | 1989 Pontiac Firebird
Jul 05, 2011 | 1998 Ford Crown Victoria
Jan 27, 2011 | 1999 Volvo C70
process for replacing tail light bulbs is the same in all models. If
you have a burnt-out tail light bulb, you may need to replace the
brake light, the reverse light or the turn signal. The procedure to
replace each of the bulbs is the same.
1. Open the Hummer's rear swing gate. This will expose the edge of the vehicle's tail light assembly. You'll see two small Phillips head screws that hold the tail light assembly in place. Put on your gloves.
Remove the two screws from the tail light assembly. Pull the tail
light out and inspect the back for two bulbs. The top bulb is the
brake light and turn signal. The bottom bulb is the reverse bulb.
Determine which bulb you need to replace.
the tail light into its cradle. Hold it with one hand and replace
the Phillips head screws with the other.
Dec 03, 2010 | 2008 Hummer H3
Aug 06, 2010 | 2004 Mazda 6
May 19, 2010 | 2004 Chevrolet Tahoe
Aug 02, 2009 | 2001 Chevrolet Impala
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: