Question about Toyota Camry

1 Answer

How to recycle cmputer after reseting CEL

What i need to do to recycle computer before smog check

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 161 Answers

1.let car sit overnight. 2. Start engine, put A/C on high, let it idle for 20-25 minutes, 2, then drive car uninterrupted for 60mph for 10 minutes, 3. slow down to 25 mph for 4 minutes, come to a complete stop with foot on brake let it idle for 2 minutes, 4. drive again at 30 mph for 8 minutes, come to a complete stop let it idle with foot on brake for 3 minutes. 4. Drive at 40 mph (turn off overdrive) for 6 minutes. 5. Drive at 20mph for 3 minutes at a time, each time coming to a complete stop with foot on brake for 2 minutes. Do this 4 times. Let the car cool overnight and repeat entire process. Then check status of systems with a code scanner.

Posted on Apr 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset computer on 2002 ford expedition. fuel pump has been replaced and has new battery. need to pass smog.


What ? the monitors aren't set ? Need to do drive cycle to get them to set . Do you have a check engine light lit ?

Ford Motor Company Driving Cycle

Apr 04, 2017 | Ford Cars & Trucks

1 Answer

What is the drive cycler for a 1999 nissan altima


I don't think anybody understands what you mean by drive recycler ..

Try putting the key in the ignition and turning it on - leave it for a few minutes. Repeat the process a few times. Your onboard computer may 'relearn' .. and not display check lights.

Try turning the ignition on/off a few times. This sometimes does the trick.

If you know somebody with an OBD - the handheld diagnostic machine - ask them if they can connect it to your car and reset all warning lights

Apr 23, 2016 | Nissan Cars & Trucks

1 Answer

MY (CEL) HAS BEEN ON FOR 2YRS SHOWING THE SAME DTC'S PO171 & PO174 (LEAN CONDITION BANKS 1 & 2) SINCE MY TRUCK RUNS GREAT I DIDN'T STRESS ABOUT THE CEL AND CODES, UNTIL AUG OF THIS YR WHEN I HAD TO HAVE A...


I bought a code reader and use it to cancel codes (When check light is on it puts the engine in a safe mode , affecting MPG ) I drive 600+ miles a month and the codes only throw 2 or 3 times , I have become good at canceling them on the fly with no noticeable problems. Just turned 200k and still runing strong

Oct 09, 2013 | 1999 Ford Explorer

1 Answer

2002 VW Golf GLS check engine light reset?


Codes and the CEL can be erased with the same scanner used to retrieve the codes. It is a separate function of scanners.

Jul 23, 2013 | Cars & Trucks

1 Answer

1997 Mazda Protege...CEL P0141 still on with both new o2 sensors.


Code 141 is for the heater circuit for bank one sensor two. That is the O2 sensor after the catalytic converter.
If you have replaced the sensor and the code still sets, the problem is in the harness or the power source for that heater circuit.
The sensor is taking too long to heat up.

Jan 25, 2013 | Mazda Protege Cars & Trucks

1 Answer

I have a 97 Isuzu rodeo 3.2 and have had a prob with cel flashing when it flashes the truck misfiresthe cel for about a week now i've got PO101 & PO102 PO300 i need to smog can somebody please help M


  • With the engine cold take and spray some carburetor cleaner around the intake. Can't believe so many places left you hanging like this. Lets see, check the PCV valve and the PCV valve and make sure it is not cracked, split, rotted, clogged. I only recommend and use OEM MAF sensors period. I don't car how fancy the name may be. Did you test the harness on your MAF for proper continuity? Check all vacuum hoses for any leak. Also pull your plugs again and see if any of the new plugs are fouled. I have seen a faulty fuel injector, that won't close, cause this.

  • Keep me updated. Hope this helps.
Regards, Tony



Oct 28, 2011 | Cars & Trucks

1 Answer

How to reset computer on 2004 gmc envoy


If you are talking about turning off the check engine light (CEL), a simple reset will not work. The reason for the CEL being on needs to be addressed first. There are fault codes generated by the computer that can be read a OBII reader. These codes identify the area or sensor where the problem exists. One thing you never want to do is drive the car for longer periods of time with a flashing CEL. A flashing CEL indicates there is a problem that could possibly harm the engine or catalytic converter.

Jun 30, 2011 | 2004 GMC Envoy

2 Answers

My 1997 saturn SL1 wont pass a smog test..was told when I changed the battery it messed up the computer and I need to reset the computer. How do I do this?


Only service station can reset.If your check engine light is on go to a Pep Boys or auto barn most will read the computer diagnostic for free.( $ 5-10 ) tip might get them to reset it,might.I don't know what a service station charges $ 75 ? good luck

Sep 05, 2009 | 1997 Saturn SL

1 Answer

Change lightbulb for check engine light


DOES THE SYSTEM GO THROUGH QUICK TEST? I ASK BECAUSE IT IS VERY UNLIKELY THE CEL IS BURNED OUT, NEVER SAW IT EVEN OCE IN 20 YEARS OF DOING SMOGS AND FIXING ITEMS LIKE THE CEL INOP, WAS ALWAYS ANOTHER REASON. THE CHECK ENGINE LIGTH (CEL) IS IN THE INSTRUMENT CLUSTER, IT MUST BE REMOVED TO GET ACCESS TO THE BULB TO EITHER REPLACE IT OR FIGURE OUT WHY IT DOESN'T WORK.

Nov 12, 2008 | 1990 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...