Question about Cars & Trucks

1 Answer

A/C Cluch Spinning, Fluid Full, but No Cold Air

I have issue with my A/C, when I turn it on the A/C Clutch Engages, but the air doesn't get cold. The R134a is full, the gage reads green (hence indicating Full) and when I try to add more, it just starts coming out of the pressure relief valve. What could be the problem is the Air Conditioning Clutch Engages, full fluid, but no cold air? Could it be air in the system?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,511 Answers

Many A/C compressors rely on a computer generated reset of data to perform properly. Check the gauges, while attempting to energize the system to see if the fluids are up to the proper levels. Too much pressure can also be caused by a blockage in the lines and thus leaking from the valves. When filling with Freon, it is important to do a full Vacuum of the system to prevent air locks, and false readings on the gauges.

Posted on Apr 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 infiniti qx4 is not blowing cold air


I REALLY DOUBT THE COMPRESSOR IS THE ISSUE HERE. The problem may be the air temperature control blend door actuator motor and/or the blend door is warped and jammed. To replace these componenets it will in most caases require the removal of the entire dash assembly

Mar 20, 2014 | 1999 Infiniti.5 QX4

1 Answer

Help 2008 ford fusion heater and ac stopped working


1) TEST the fuse+ relar of a/c
see the next steps and fix it. God bless you
If so, the compressor is working and the A/C system probably contains enough refrigerant to make cold air, so the problem is inside the HVAC unit. Replace the motor that controls the blend air door (this is a difficult job and best left to a professional since it involves tearing apart the HVAC unit -- about an 8 to 10 hour job!).
If the compressor does not engage when you turn on the A/C, see if it will run by jumping the compressor clutch wire directly to the battery (use a fused jumper wire). If the compressor works when you jump it, and the A/C blows cold air, the system contains refrigerant and the fault is likely a bad A/C compressor clutch relay or a bad clutch cycling switch or pressure switch.
If the compressor does not engage when you jump it, the problem is a bad compressor clutch.
If the clutch engages but the compressor does not turn (the belt will start to slip and squeal), the compressor is locked up and you need a new compressor.
If the compressor clutch engages and turns the compressor, but the A/C still does not blow cold air, the system is probably low on refrigerant and needs to be recharged

10_5_2012_12_00_24_pm.jpg

Oct 05, 2012 | 2008 Ford Fusion

1 Answer

Ac vent blower


proceed according and fix it. God bless you
If so, the compressor is working and the A/C system probably contains enough refrigerant to make cold air, so the problem is inside the HVAC unit. Replace the motor that controls the blend air door (this is a difficult job and best left to a professional since it involves tearing apart the HVAC unit -- about an 8 to 10 hour job!).
If the compressor does not engage when you turn on the A/C, see if it will run by jumping the compressor clutch wire directly to the battery (use a fused jumper wire). If the compressor works when you jump it, and the A/C blows cold air, the system contains refrigerant and the fault is likely a bad A/C compressor clutch relay or a bad clutch cycling switch or pressure switch.
If the compressor does not engage when you jump it, the problem is a bad compressor clutch.
If the clutch engages but the compressor does not turn (the belt will start to slip and squeal), the compressor is locked up and you need a new compressor.
If the compressor clutch engages and turns the compressor, but the A/C still does not blow cold air, the system is probably low on refrigerant and needs to be recharged

10_5_2012_12_14_20_pm.jpg

Oct 05, 2012 | 2001 Oldsmobile Aurora

1 Answer

My air conditioner is blowing warm air on the driver side and cold on the passenger side


see this steps and think with clearly and logically NOT feared. God bless you
checkmark.gif Start with the compressor. Does it engage when you turn on the A/C?
If so, the compressor is working and the A/C system probably contains enough refrigerant to make cold air, so the problem is inside the HVAC unit. Replace the motor that controls the blend air door (this is a difficult job and best left to a professional since it involves tearing apart the HVAC unit -- about an 8 to 10 hour job!).
If the compressor does not engage when you turn on the A/C, see if it will run by jumping the compressor clutch wire directly to the battery (use a fused jumper wire). If the compressor works when you jump it, and the A/C blows cold air, the system contains refrigerant and the fault is likely a bad A/C compressor clutch relay or a bad clutch cycling switch or pressure switch.
If the compressor does not engage when you jump it, the problem is a bad compressor clutch.
If the clutch engages but the compressor does not turn (the belt will start to slip and squeal), the compressor is locked up and you need a new compressor.
If the compressor clutch engages and turns the compressor, but the A/C still does not blow cold air, the system is probably low on refrigerant and needs to be recharged.

7_25_2012_8_45_21_am.jpg

Jul 24, 2012 | 2007 GMC Sierra Classic

1 Answer

My a/c is not working properly. It seems like every few months it stops blowing cold air and for about 2 weeks it blows hot air only.


That could be a variety of problems. The first thing you might do is this. When it isn't working, open the hood and see if the clutch on the A/C compressor is cycling. If it engages and disengages while the air conditioning is on, that would indicate that the problem might be ducting or another issue. If the clutch doesn't cycle, one of the first things I would check would be to see if there was power to the clutch when the A/C is turned on. It would be helpful to know what your vehicle is, such as year, model, and if it's equipped with Automatic Climate Control like many Buicks are.

Jul 23, 2011 | Buick Park Avenue Cars & Trucks

2 Answers

No cold air for a.c.


Well Bruno it sounds like you lost freon from your a/c system.The cabin filter wont restrict you from getting cold air.Check that your a/c clutch engages when you turn it on.if it dont you need freon and have to check for leaks

May 23, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Ac clutch


sounds like the system is either low or out of refrigerant. There is a low pressure switch in the system to shut it down in the event of freon loss. First , verify , then test for a freon leak. Once repaired, and recharged, will blow cold air again.

Mar 29, 2009 | 1999 Chevrolet Blazer

1 Answer

Clutch hard to use


you can check cluch fluid and make sure that its full also your cluch could be starting to go out

Nov 14, 2008 | 1991 Chevrolet Cavalier

1 Answer

Screeching noise, then a/c stops blowing cold air. Still blows air, just not cold air.


it could be the air conditioning clutch going out. to check turn your car on and idle it with ac on and hood open. at the ac compressor it will have a pulley on it with a clutch that engages when the air conditioning is on. if it engages and disengages it can be the clutch itself has gone bad, the ac clutch will also disengage if there is not enough freon in the ac system, will also engage and disengage if the pressure gets too high in the ac system. Depending on the year of the vehicle it will disengage at full throttle and come back on when you are not at full throttle.
If it is a metallic sounding screech for example take a coke can and drag it across pavement kind of sound it could be a bad compressor or a bad ac clutch. If it is a more rubbery sound for example a car spinning its tires kind of noise it could be a loose belt.

1. Check to make sure all belts are tight under hood
2. start car and look at ac compressor to make sure compressor pulley is turning and that the fan clutch is engaged spinning


Aug 09, 2008 | Mercedes-Benz 400-Class Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...