Question about Hyundai Motor 2004 Accent
Diagram of a hyundai accent 2004 rear brakes
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Jack up rear of car till tire is off the ground.
Remove lug nuts & remove wheel.
Remove phillips screw(s) from drum.
Using a hammer, strike the drum to loosen it from the hub.
Remove drum by simutaneously turning it and pulling it outward away from the vehicle.
Posted on Oct 04, 2009
Remove the lower bolt and lift the caliper assembly up and secure it with a wire or some other retaining method.
Remove the pads.
CAUTION: Do not depress the brake pedal while disassembling the pads
INSPECTION 1. Check the pads for wear or oil contamination and replace, if necessary. • The pads for the right and left wheels should be replaced at the same time. Never "drop" or intermix brake pad sets. • All four pads must be replaced as a complete set. • When replacing the brake pad, check for deformation. When replacing the guide spring, use a new one or the used one after cleaning away foreign material. 2. Check the pad for damage or deformation. Brake pad thickness: Standard value: 9 mm (0.354 in.) Service limited value: 2 mm (0.0787 in.)
INSTALLATION 1. Install the pad clips. 2. Install the pads onto each pad clip.
3. Insert the piston in the cylinder using the Special Tool (09581-11000). 4. Install the new pads. The shims are attached to each pad as illustrated Be careful so that the disc or pad isn't contaminated by grease. 5. Install the bolt and tighten to the specified value. Tightening torque Guide rod bolt: 22~32 Nm(220~320 kgf·cm, 16~24 lb·ft)
Posted on Jun 11, 2008
Sign up for an account on hmaservice.com. Once you do so, log in and click on "Shop". You can then enter your year/make/model and you will find the info under, engine mech. system>timing system>timing belt>repair procedures. Very detailed, and best of all, FREE.
Posted on May 27, 2009
Tips for a great answer:
Apr 15, 2012 | 2003 Hyundai Accent
Jul 17, 2008 | 2007 Hyundai Accent GS Hatchback
Nov 29, 2011 | Cars & Trucks
Sep 05, 2011 | Hyundai Accent Cars & Trucks
May 15, 2011 | Hyundai Motor 2004 Accent
Apr 15, 2011 | 2006 Hyundai Accent
Mar 02, 2010 | Hyundai Motor 2004 Accent
May 03, 2009 | 2003 Hyundai Accent
Mar 29, 2009 | 2003 Hyundai Accent
868 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: