Question about 1995 Jeep Wrangler

1 Answer

High pitched squeal when jeep idles or during deceleration. soonafter, clutch pedal jumped violently under my foot followed by engine stalling out. could not depress clutch pedal after that.

Soonafter, clutch pedal jumped violently under my foot followed by engine stalling out. could not depress clutch pedal after that.

Posted by on

  • art bickford
    art bickford Apr 15, 2014

    2002 Jeep Wrangler 4.0.....loud squealing noise when in idle or while decelerating. then pedal spasmed.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Fixya-Fanatic:

    Visited the website for 90 consecutive days.

  • Master
  • 407 Answers

It sounds like your clutch bearing has gone they are usually on a pendulum system it screeches before it starts to go. Best get it checked.

Posted on Apr 15, 2014

Testimonial: "is the clutch bearing and throw out bearing the same thing?"

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 457 Answers

SOURCE: Jeep YJ stalls while clutch is depressed

thrust bearings are bad and the flywheel is moving out of range of the crankshaft sensor, or the crankshaft sensor is sitting too close to the flywheel.

Posted on Mar 12, 2013

  • 6982 Answers

SOURCE: wont hold idle will start with foot depressing gas pedal will run with foot on gas but stalls when foot removed

Check and clean Idle air control valve. Make sure its responding to signal as well. Also make sure ther are no vacuum hoses disconnected. This may not be a "cure" but it's a good place to start.

Posted on Apr 14, 2009

  • 1 Answer

SOURCE: loud squealing noise when clutch pedal is depressed

sounds like its slipping on its way out me thinks

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 Ford Taurus Lx, idles to low. I have to keep my foot on the gas pedal


If you have recently replaced the battery, disconnected the battery or had to jump start the Taurus, you have likely reset the electronics.

The result of this reset is that the engine control module needs to relearn the running parameters including the idle point.

It take several minutes of idle/driving to reset the baseline parameters and during this interval keeping the engine from stalling is a challenge.

Hope this helps?

Engine Stalling After New Battery Fix It Like Pro

Nov 17, 2016 | Ford Cars & Trucks

3 Answers

The clutch was having a hard time going into gear.All of a sudden there was a high pitched squeal/scream coming from the transmission area.


that sounds like a throw out bearing failure-is there any adjustment at the slave cylinder-it may be holding the bearing against the clutch and causing the noise-this thread may help-http://www.jeepforum.com/forum/f9/how-change-bleed-clutch-slave-cylinder-511531/- cheers Denny

Dec 22, 2013 | 2000 Jeep Wrangler

2 Answers

Car is making a high pitch squeal some times when driving,noise gets worse when I take foot off the gas pedal. Also has odor of boiled eggs at times. Is this a tranny problem or emission system failure or...


The high pitch squeal ia most likely the serpentine belt on the front of the engine you can buy some belt dressing from the part store and put it on there and fix that or some soap will work also, the belt may also need to be tightened. As for the egg smell if it smells like eggs it's the catylitic converter doing it's job and is normal, although you should not be able to smell it inside the car when driving you may have an exhaust leak and could be very dangerous carbon monoxide exposure.

Jun 02, 2011 | 1998 Nissan Maxima

1 Answer

While pulling out of a parking lot, my foot slipped off the clutch (snowy/wet boots) and the engine died, then wouldn't start. Is there something else going on?


if it wont crank over im thinking that maybe the clutch pedal damaged the clutch safety switch under dash near top of clutch pedal stroke-prevents you from starting engine without foot on clutch pedal.

Jan 29, 2011 | 1993 Jeep Wrangler

1 Answer

2002 accent stalls and has a rough idle


During rough idling, when the clutch is released due to high rpm of the engine, the engine may stalls. Another possible reason due to quick release of clutch pedals.

First tune the idling of the engine. Look for the cleaness of the air filter, Fuel lines are clear for free flow. Check the spark plugs for free from carbons and gaps are maintained correctly.

When slowing down the car change to appropriate gears and netural the gears when about to stop.

Jun 05, 2010 | 2002 Hyundai Accent

1 Answer

Saab 1.8 diesel 2007 the problem iam


the car will maintain 850/900 revs in all gears on the flat and only decelerate when the engine is reving over 1500.its called auto idling valve.....(computer controlled..)

Apr 12, 2010 | 2008 Saab 9-3

2 Answers

2006 AUDI A4 2.0 HAS A HIGH PITCH SQUEAL AT IDLE TAPERS OFF AT HIGHER RPM -THEN MAKES A WHINING NOISE WHEN ENGINE IS SHUT OFF --ANY IDEAS?


hey not sure if its totally right but the high pitch squeal at when its idleing could be the tentioner pulley bearings on the engine belt not sure about the whining noise when its shut off

Oct 04, 2009 | 2006 Audi A4

2 Answers

Wont hold idle will start with foot depressing gas pedal will run with foot on gas but stalls when foot removed


Check and clean Idle air control valve. Make sure its responding to signal as well. Also make sure ther are no vacuum hoses disconnected. This may not be a "cure" but it's a good place to start.

Apr 14, 2009 | 2001 Jeep Grand Cherokee

1 Answer

'93 Aerostar-stalls while driving/scary-stalls in 'drive' at stops


Wow!!! Now that's a headfull of problems....
This could be a great many things...
Check these before you sell. I have a '93 Aerostar and can't live without it.
1. Check idle speed
2. Fuel filter may be clogged or water in the fuel system.
3. Choke improperly adjusted or sticking.
4. Distributor components damp or damaged.
5. Faulty emissions components.
6. Faulty or incorrectly gapped spark plugs/ Also check wires.
7. Vacuum leak at the carburetor/fuel injection unit or vacuum hoses.
8. On 1986 models, stalling during idle or deceleration may be caused by sludge in the throttlebody. (2.3 litre engine)
9. On 1986 & 1987 models with a 2.3 litre engine,hesitation or stalling during acceleration may be caused by carbon build-up on the intake valves.....I hope this helps!! Adios

May 23, 2008 | 1993 Ford Aerostar Extended

Not finding what you are looking for?
1995 Jeep Wrangler Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...