Question about Cars & Trucks

1 Answer

No accelleration after five minutes of driviing

Changed fuel filter changed butterfly bled system changed battery and 109 relay as previously advised

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Depending on the car you could try changing the coil pack(s)/distributer followed by spark plugs or even vice versa, after that it could be fuel injectors, if no change after that it could be in your pistons be it loss of compression or the intake/exhaust valves not working correctly after these you'd need a new engine

Posted on Apr 15, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: starting problems with 2002 tahoe

Most chevy engines have the same symptoms when the starter starts to give up. change fuel and air filters, and if sitll has the same problem replace the starter.

Posted on Nov 18, 2008

  • 1 Answer

SOURCE: 1992 Chrysler LeBaron 3.0 L.

the owner probably rerouted the fuel line because like my 92 chrysler lebaron v6 3.0 the fuel lines keep seeming to come off and the clamps always break. I have replaced the clamps 5 times in a month and replaced filters 2 times in 2 months. The only thing i could think of is that your fuel is being cut off possibly because there is no filter to clean all the junk out. Try putting a fuel filter on and see if that will work

Posted on Feb 09, 2009

  • 44 Answers

SOURCE: 2003 Cadillac CTS cuts off after 20 minutes. The filter, relay

Try having your braking system checked, it may be a vacuum problem. I had the same problem and it was a vacuum problem...it's easy to fix.

Posted on Apr 18, 2009

  • 7 Answers

SOURCE: 99 ram diesel wont start

Did you check to see if there is power to the glow plugs if not then that may be the problem and if there is power when you cycle the key not to start but for the plugs to warm up you may have a bad glow plugs.

Posted on Apr 22, 2009

  • 1 Answer

SOURCE: Which relay is the fuel pump relay?

The fuel pump relay switch, if that is what you are looking for, is actually a red button hidden underneath the hood latch. We just had to do the same thing and that will fix it. Just press the red button and you should be fine.

Posted on Jun 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My golf mk4 stalls while driving


Have you done basic tests, such as fuel pressure? Coolant temp sensor? Crank sensor?

Sep 28, 2016 | Volkswagen Golf Cars & Trucks

1 Answer

Leak on fuel line e 150 1991


Change the Fuel Filter the process is
  • 1

    Park the van on a flat, level surface. Ensure the parking brake is set.

  • 2

    Open the hood to locate the fuse panel. The fuse panel is located by the battery. Find the relay for the fuel pump and pull it out by hand.


  • 3

    Start the van and allow it to idle until it stalls out. This will depressurize the fuel system.

  • 4

    Locate the fuel filter under the van. The filter is located by the driver door mounted along the frame rail.

  • 5

    Disconnect the inlet fuel line with the quick-disconnect tool. This tool can be purchased at any automotive-parts stores. Place the tool over the connection and pull it toward the filter. This will release the fuel line from the filter. Repeat to release the line on the outlet end. Place a piece of masking tape over the inlet line to help remember which line is which. The inlet line is the line coming from the fuel tank into the filter. The outlet line is the line that runs to the engine from the filter.

  • 6

    Unbolt the filter from the bracket assembly. Slide the filter from the bracket.

  • 7

    Slide the new filter to the mounting bracket. Tighten the bracket with a socket wrench. Ensure the arrow is pointing toward the front of the van. The arrow designates the direction of the fuel flow.

  • 8

    Push the inlet line onto the filter. The line will lock in place. Ensure the tape is removed before installing. Connect the outlet line to the filter. It will lock in place also.

  • 9

    Insert the fuel pump relay back into the fuse panel. This will pressurize the fuel system.

  • 10

    Turn the ignition to the "start" position and allow the fuel pump to prime itself and push fuel through the lines. Attempt to start the van; it may not start right away. Once the van has started allow it to run for five minutes and observe for leaks.


    X2 Performance Chip

  • Jun 19, 2012 | Ford E-150 Cars & Trucks

    1 Answer

    I think I ran out of gas. I changed the fuel pump


    Starter relay or Ignition relay.Is your batterie fully charged?

    Mar 27, 2010 | 2003 GMC Yukon Denali

    1 Answer

    My kia sedona will only start when i prime the diesel filter by hand, then it runs faultlessly as long as i need to. however, within five minutes of stopping the engine it will not start again on the...


    Yes it could be the pump, but also it could be a leaking injector or a clogged up diesel filter.

    If the injectors are leaking they will be sucking in air and forcing the fuel back to the tank,

    you can pour water around each injector to see if any are bubbling. Get the fuel filter changed and have the system bled through before replacing the fuel pump. they are very expensive.

    Hope this helps
    Regards
    Dan

    Feb 28, 2010 | 2002 Kia Sedona

    1 Answer

    Won't start after shut off


    spark plugs wires. ignition systems check?

    Mar 14, 2009 | 1996 Lincoln Town Car

    2 Answers

    2002 VW Jetta died while driving it.


    Either you threw a belt or the alternator went bad. Your symptoms sound like alternator...you were running on the battery till you ran out of power.

    Feb 20, 2009 | 2003 Volkswagen Jetta TDI

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    11 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...