Question about 2003 Toyota Corolla

Open Question

Head settings for toyota corolla 2003 140i

Hi there ive just redone my motor for toyota corolla 140i plz confirm if u can assist with the head settings? plz

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: need torque settings for 1985 4A corolla cylinder head

hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:

9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Posted on Jan 14, 2009

Ad
  • 104 Answers

SOURCE: torque for head bolts for 1984 Toyota Corolla

head bolt toque specs are 40-47 ft-lbs

Posted on Apr 17, 2009

joecoolvette
  • 5660 Answers

SOURCE: need the cylinder head torque settings on a toyota

Tighten in several passes to 44 foot pounds.

I just wanted to add. Since this is an aluminum cylinder head, I hope you loosened the head in the loosening torque pattern. The pattern opposite of the torque tightening pattern. If not, you stand the chance of warping the head.

Again, since it's an aluminum head, it needs to be checked for flatness. Most aluminum heads need to be surfaced before re-installing.

Tightening torque pattern is as follows:

1.The Drivers side of the engine is the Left side.
From the Front going towards the back; the bolts are numbered 10, 6, 1, 3, and 7.
From the Front going towards the back on the Passenger side; the bolts are numbered 8, 4, 2, 5, and 9.

The Exhaust and Intake Camshaft Bearing Cap bolts go to 9 foot pounds. Tighten gradually. One bolt to the other with so many foot pounds, work back, and forth up to 9lbs.

Camshaft Timing Pulley bolts go to 43 foot pounds. (In a tightening sequence, and gradually)

Posted on Jul 25, 2009

  • 333 Answers

SOURCE: 2005 toyota corolla motor oil capacity?

if you have a 1ZZ engine

4.2 quarts, 4.4 quarts with oil filter change

if you have the 2ZZ engine (XRS model) it is

4.4 quarts, 4.6 quarts with oil filter change

NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.


Posted on Sep 10, 2009

Pelukes01
  • 52 Answers

SOURCE: what are the cylinder head torque settings for a

0900c1528006efe6.jpgUmiformilly tighten each of the ten head bolts in several passes, in the sequence shown. Tighten them to 44 ft. lbs. (60 Nm).

Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota 2006 Corolla heater fan not working on Hi settings


heater fan motor has a relay
or vacuum or electronic motor works the internal flaps

if it is the fan motor
how to replace one
2006 Toyota Corolla Removing AC Heater Blower

Jul 04, 2016 | Toyota Cars & Trucks

1 Answer

Toyota 4k torque settings


torque setting for crankshaft,head,rocker,

Jan 21, 2010 | 1983 Toyota Corolla Deluxe

1 Answer

Had the head redone, new Carb fitted, new distributor cover and leads new spark plugs, crank timing set to mark (0)and cam timing (2e)set to mark on head. the engine swings, fires from the carb, spark on...


Sounds like you have your timing off. If it is backfiring, that means that 2 of your wires are crossed, causing the plugs to fire on the exhaust stroke versus the compression stroke. Recheck your timing.

Jun 07, 2009 | 1984 Toyota Corolla

2 Answers

Torque for head bolts for 1984 Toyota Corolla


head bolt toque specs are 40-47 ft-lbs

Mar 22, 2009 | 1984 Toyota Corolla

1 Answer

Heat blower motor stopped


Hi. And welcome to FixYa. You need to remove the glove box door, and then you can get to the blower motor. 3 screws holds it in. Easy to remove.

A FIxYa rating for my assistance (4 blue diamonds) would realy be appreciated.

Feb 11, 2009 | 1996 Toyota Corolla

1 Answer

Need torque settings for 1985 4A corolla cylinder head


hey, torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:

9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Jan 14, 2009 | 1985 Toyota Corolla 2 Door

1 Answer

Cabin Air Filter 2002 Corolla


Toyota initiated cabin air filters in Corollas starting in 2003.

Jan 03, 2009 | 2001 Toyota Corolla

Not finding what you are looking for?
2003 Toyota Corolla Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...