Question about 2006 Mercedes-Benz B-Class

Open Question

Mercedes b200 location of power steering flud

How to change power steering oil and were is located

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
ajarema
  • 404 Answers

SOURCE: Oil & Fuel Filter change on Mercedes A Class

It is a cartridge type and is situated behind the engine near the body on the left side. You can see it clearly as it looks like a black can with a big nut on top. To make it easier when you look at your engine your fuel filter is on top and the oil is just left from it little down. Hope this helps.

Posted on Jan 10, 2009

Ad
  • 57 Answers

SOURCE: Where is the oil filter?

It's a black cap at the rear of the motor. (drivers side) on top.It's a paper type filter.

Posted on May 22, 2009

  • 3 Answers

SOURCE: 1995 Mercedes S420 Power Steering Pump

it is locates on the left side of the engine block by the distributor cap,if ur car engine is the 119.971 .140 body style

Posted on May 22, 2009

iambanshee74
  • 3489 Answers

SOURCE: what is the oil capacity on a 2003 mercedes c240

8 quarts including the filter. please make sure you replace it with one from merecedes benz. this needs to be purchased from the dealer as a special tool.

Posted on Dec 23, 2009

  • 28 Answers

SOURCE: location of the brake fluid input

You'll also need to drain and flush both systems as the two fluids are incompatible. Brake fluid (DOT3, etc.) goes into the brake master cylinder (located directly in front of the brake pedal, except inside the engine compartment...on the left hand side). Power steering fluid should go into the power steering pump reservoir mounted directly to the pump or in a remote location somewhere near the pump. Usually the power steering pump is located on the front of the engine near the fan/serp. belts.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Leaking power steering pump subaru liberty 96


I have not seen a power steering unit located on top of an engine usually they are on one side of the motor. I will need more info like is it drops of fluid or a spray pattern of oil or spatter???? where on the motor besides top is the oil top front top back??? Please don't take this wrong , I just have questions without seeing it its somewhat difficult to actually know what's going on with the oil and color of oil is it thin or thick fluid???

Jan 02, 2014 | Subaru Cars & Trucks

1 Answer

Steering


Need to replace a worn out steering rack
& flush the Power Steering System
Have to install a Return Line Filter after
the cooler or you have no warranty on new rack
If you change power steering & transmission fluids on all vehicles every 3 years, you avoid expensive repairs,but yours
is 18,19 years old, so you got an ongoing restoration project,
not a daily driver

Jul 18, 2013 | 1995 Mitsubishi Montero

1 Answer

Is loosing oil i check oil forthe motor is ok i check oil for transmission what other oil can be and where is located. thanks


The oil is probably power steering fluid leaking from the seal on the end of the power steering rack.

Nov 20, 2010 | 1998 Dodge Caravan

1 Answer

Power steering is leaking fluid can you tell me some of the locations that it can leak from


two most likely places it could leak oil from is the steering rack or the power steering pump,,,check the steering rack by turning the steering hard over and looking at the rubber boots on each end to see if any oil is leaking from them (its red in colour) also look at the pump you should see if thats leaking oil as it will splater every were,,,there is a slim chance its a pipe,,,,

Sep 04, 2010 | 1989 Buick Reatta

1 Answer

I have a 1993 Toyota Previa. It has been leaking oil for the last few days. I have difficulty turning the wheel and at the same time it makes a wealing noise. I checked my engine, brake, and power steering...


No, this is a power steering issue. Are you certain the power steering fluid level is correct? The squeeling noise is caused by air in the power steering pump. The leak must be repaiored, usually by replacing the pump, unless it is just a leak in the reservoir.

Sep 04, 2010 | 1993 Toyota Previa

2 Answers

POWER STEERING AND HIGH FUEL CONSUMPTION


You need to check the the power steering resevior located under the hood, the fluid level may be low, and a possible leak, if low you will need to add some power steering fluid, the fuel consumption maybe in need of a tune-up oil change, spark, plugs, fuel filter, air filter.

Nov 23, 2009 | 1994 Volvo 940

2 Answers

Power steering fluid or ATF


Yes There Is ONLY ONE PLACE for Power Steering Fluid.

ZF Gemmer Steering

The ZF Gemmer steering is permanently filled with oil. There is no drain plug.

ZF Rack and Pinion Steering Without Power Assist

The ZF rack and pinion steering is lubricated for its service life and therefore does not require servicing.
In case of repair, steering components on E21 vehicles are to be lubricated with a sodium-based grease, with a temperature range of -30°C to +75°C .
Calypsol D 4024 BMW Part No.32 11 1 116 929

Ball and Nut or Rack and Pinion Power Steering

Only reputable brand Automatic Transmission Fluid (ATF) of Dexron® III formulation may be used for the power steering and power steering pump.
In case of brief hydraulic noise after starting at low outside temperatures, we recommend replacing the red ATF with green CHF or LHM oil (see below).

ZF Ball and Nut Power Steering with H31 System

The approved oils for BMW models with power steering and the H31 brake booster system are identical with those oils approved for power steering without the H31 system except for the following:

E32 models with self-leveling rear suspension and mutual oil supply tank in the engine compartment.
Countries with very low outside temperatures (e.g. Canada) had their power steering systems filled at the factory with Pentosin CHF 7.1 since 9/87 through 9/91. This is also to be used on vehicles built before 9/87.

Since 9/91, vehicles now use Pentosin CHF 11S instead of CHF 7.1.

Pentosin CHF 7.1 BMW Part No.81 22 1 468 879
Pentosin CHF 11S BMW Part No.82 11 1 468 041

These cars are marked with a pertinent label located close to the oil tank.

LHM oils (green color) of the following manufacturers may also be used instead of Pentosin (CHF 7.1):
Shell LHM
Castrol LHM
Exxon LHM

The mixing of CHF, LHM oils and ATF is not permitted.

Pentosin CHF 4548 was used on vehicles built before 9/87 but is no longer available. However, mixing of Pentosin CHF 7.1 with residual quantities of Pentosin CHF 4548 are permiffed in these earlier vehicles. Mixing of these two oils is not permitted for E32/E38 vehicles.

The hydraulic system for power steering and power-assisted brakes must be drained as completely as possible when changing from one type of oil to the other.
All oil supply reservoirs are marked with the type of oil being used - ATF or CHF.

Jun 03, 2009 | 2003 BMW 325

1 Answer

Oil pressure gauge keeps fluxuating. Think it is the sensor. Want to know where the sensor is located on my 1994 lincoln continental


The oil sending unit is located below the power steering pump. 
You can get to it by removing the alternator, then the three bolts around the power steering pump bracket. Remove the small pulley on the bracket and pull back on the power steering bracket. Look behind bracket and you will see the oil sending unit. 

Disconnect the wire from the oil sending unit. Use a deep socket (1 1/16) to remove unit. 

While you have unit remove, I would go ahead and use an oil pressure gauge to test the oil pump pressure. 

Good luck and hope this helps

May 02, 2009 | Ford Lincoln Continental Cars & Trucks

2 Answers

Noise from the power steering . How do I check and replace the fluids?


check the fluid at the pump. under the hood. remove the cap and check there

Mar 21, 2009 | 1998 Buick LeSabre

2 Answers

Audi power steering pump location


Before you replace the pump, check the filter located inside the oil tank. This filter cleans the oil before going to pump. REMEMBER that Audi uses a special oil!!! Not your normal power steering fluid! Mixing them could cause damage to the entire system!

Jan 02, 2009 | 1999 Audi A6

Not finding what you are looking for?
2006 Mercedes-Benz B-Class Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

79186 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...