Question about 2003 BMW 525i
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
of the Molding
Take the Molding Trim whether it is stock black or painted. Mine is black because my car is a year 2000. Painted side moldings were done in the year 2001. Snap them into place.
5 Installation of the Rubber Gaskets
From the stock bumper, retrieve the upper rubber gaskets unless you ordered new ones. Simply take a screw driver and pry a corner off to get you started. Wash thoroughly. NOTE which one belongs on which side.
Place the rubber gasket on the M5 Front Bumper onto its appropriate side. Top The M5 Bumper is now Fully Assembled!!! Place aside where it can't be damaged.
Posted on Nov 15, 2009
are you sure you need the crankshaft position sensor changed. it is at the back of the engine i believe, but.....
check for a wet ecu first... read the note on e36...
the ecu compartment is under the windshield on the passenger side on E36
you gain acess to it under the hood....
this compartment gets wet, the ecu lays on a flat surface in that
the bottom side of the circuit board gets wet and starts corrosion.
remove the ecu, take the bottom plate off, clean the bottom of the circuit
board with alcohol and a soft tooth brush.
you should be able to see the signs of corrosion or conductive build up.
this gunk bridges solder points doing all sort s of wierd things to your
car, including false sensor readings from asc/abs controllers and other
all the way to engine failure and worst case burnt and shorted wiring
I'm on my 3rd ecu, took me and the repair boys a few years to figure this
BTW: i would get that ecu mounted above that flat surface, use some sort
of standoff to raise it so that it is not laying in the wet.
Posted on Feb 07, 2010
All the windows run off the same fuse or circuit breaker so that would not be the problem or all the windows would be inoperable.
Posted on Jul 08, 2012
Tips for a great answer:
Aug 28, 2017 | BMW Cars & Trucks
Mar 14, 2017 | BMW Cars & Trucks
Jun 10, 2015 | BMW 528i Cars & Trucks
Jul 29, 2012 | BMW 525i Cars & Trucks
Nov 15, 2009 | 2001 BMW 5 Series
Oct 17, 2009 | 2001 BMW 5 Series
Sep 26, 2009 | 1997 BMW 318
Jun 05, 2009 | 1999 BMW 5 Series
Apr 29, 2009 | BMW 528 Cars & Trucks
Mar 30, 2009 | 2001 BMW 5 Series
Jul 01, 2014 | 2003 BMW 525i
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: