Question about 2008 GMC Envoy
2008 Envoy Denali
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Rear fuse box is under the seat bottom, rear seat (middle row) on the driver's side. There is a plastic cover over the top of it that snaps into place.
Posted on Jun 20, 2009
There are many possible reasons while the car will shut down at cold , or when idling or slow.
A good thing to do would be going to the nearest Autozone and doing an error code scanning on the engine. This is free of charge, and will tell you if there is any error codes stored in the car computer.
I will try to summarize possible causes for your problem. I will list only common faults that can cause the car shutting down when you press the pedal after idling.
Air flow problems:
This commonly affect the engine when this is cold.
Check air filter, air intake, MAF (mass airflow) and IAT (intake air temperature). This problems are more noticeable when the engine is cold.
The vacuum system uses recirculated gases in your engine. A vacuum leak or a bad EGR valve can give you troubles, particularly when idling. Vacuum system is tested using an hand tool gauge.
Injection and fuel system:
A malfunctioning fuel pump, a clogged fuel line, or an injector problem may be causing the fault. Pump and lines are tested using the same hand gauge used on vacuum system
Distribution and spark plugs:
If this is the problem, then the engine is shutting down because of misfire. You will get engine warning light on, and the misfire will be reported after doing an error code scanning. When you have distributions problems you can also easily feel that the engine is not running as it should.
An automatic transmission malfunction can cause the engine to shut down when you push the pedal. When this is the problem you realize that the cause is the transmission, and that the wrong gear is on.
Other electronic troubles (ECU , wiring, etc)
The best thing to do is trying to understand in what of the condition above you may be, eventually stop at the nearest Autozone and ask a free OBDII scan, or come back to us with a more detailed description of your problem symptoms. OBDII scan can also be done using an hand tester.
Posted on Jan 11, 2010
they are bolted in a not to hard to remove once the air is drained from them however you can not drive it without the air bags. It will bounce way to much to control the truck.
Posted on Nov 30, 2010
Tips for a great answer:
Dec 22, 2015 | 2008 GMC Envoy Denali
Sep 30, 2015 | 2006 GMC Envoy Denali
Apr 09, 2015 | 2008 GMC Envoy Denali
Feb 28, 2015 | 2008 GMC Envoy Denali
Jan 15, 2015 | 2008 GMC Envoy Denali
Jun 21, 2014 | 2008 GMC Envoy Denali
Jan 26, 2011 | 2005 GMC Envoy Denali
Aug 10, 2009 | 2006 GMC Envoy Denali
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: