Question about 1997 Cadillac Eldorado

Open Question

Removing center console cover

How do i remove the center console cover on my 97 eldorado ,it has a cell phone option

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 715 Answers

SOURCE: how to remove the heater core in a 97 cadillac

remove passenger side dash and you will see it but it is not a easy job good luck

Posted on Oct 09, 2009

inkedsgt
  • 359 Answers

SOURCE: 1989 cadillac wheel tool for removing center cover

if you do not have the wrench the dealer may be able to replace it if they are factory rims. If they are aftermarket Snap On makes a universal set but they are pricy

Posted on Dec 01, 2009

  • 173 Answers

SOURCE: 1997 cadillac eldorado instrument cluster removal

remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to remove center console on 1995 eldorado


Search on youtube, there may be something there...

Dec 02, 2016 | 1995 Cadillac Eldorado

1 Answer

I have a 1997 ford explorer. Im trying to discover


Im just guessing here, but some cup holder have a rubber piece in the bottom, There may be screws under these, if not most consoles have a center cover that can be pried up and removed and there should be screws under that cover. Pry carefully as you could damage the cover. If it don't come with light prying chances are it is not made to come off. Some times the arm rest has to be remove to get to screws that hold these covers on.

I hope this helps you get to what you want. I wish you luck.

Oct 15, 2014 | 1997 Ford Explorer AWD

1 Answer

97 eldorado ac blower motor module location


the module is actually the head unit in the center of the dash there is a electronic speed control module that will be located on top the interior heater box behind the glove box unless you are lucky enough too have one that was actually assembled in the states those units that where are located under the hood on the outside blower box passenger side of car close to the valve cover side of the box

Aug 30, 2014 | 1997 Cadillac Eldorado

1 Answer

Need help removing center consol to get to radio and heater controls


Its not as complicated as it looks.first of all the front and only part of the center console you need to move simply pops out with two snap in connections at the top and to mounting screws in the back lower bottom...keep in mind moving this part of center console is only for the removal and installation of heater unit...Now for the radio is also quite simple.once you have the heater unit consolek removed,the dash component and vent cover needs to be removed.If you open both car doors @ look
on both sides of your dashboards,theres two covers.remove them..on passenger is a mounting screw for the dash cover.once removed,cover has several snap in connections that will detach it from location...be careful when doig so...now you will see full radio and its mounting bolts...there u have it..hope it helps...

Oct 09, 2012 | 1999 Buick Regal

1 Answer

On a 2005 Honda Civic I need to know how to remove the center console cover to replace a burned out bulb for the gear shift.


Detach the clips (A, B) by pulling the center console box (C) up, and removing it from the center console (D).


k42282_21.jpg

  1. Remove the screws (A, B) and clips (C), and remove the center console (D).

  2. Install the console in the reverse order of removal, and note these items


k42282_22.jpg

Dec 17, 2010 | 2005 Honda Civic

2 Answers

How to replace the turn signal switch in a 1992 Cadilac?


Turn Signal Switch REMOVAL & INSTALLATION CAUTION
Some models covered by this manual may be equipped with a Supplemental Restraint System (SRS), which uses an air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column, and instrument panel disable the SRS. Deville, Eldorado, Seville, and Fleetwood - Early Models
  1. Disable the SIR system.
    1. On Deville and Fleetwood, remove the left lower sound insulator. On Eldorado and Seville, remove the left side sound insulator.
    2. Remove the Connector Position Assurance (CPA) and detach the yellow 2-way connector at the base of the steering column.
    3. Remove the steering wheel.
    4. Make sure the ignition switch is in the LOCK position to prevent the SIR coil assembly from going off-center.
  2. Remove the SIR coil assembly retaining ring and the coil assembly. Allow the coil to hang freely. WARNING
    The SIR coil assembly will become off-center if the steering column is separated from the steering gear and is allowed to rotate or if the centering spring is pushed down, letting the hub rotate while the coil is removed from the column.
  3. Remove the wave washer.
  4. Use tool J-23653-C or equivalents, to depress the shaft lock, then remove and discard the shaft lock retaining ring.
  5. Remove the shaft lock.
  6. Remove the turn signal canceling cam assembly.
  7. Remove the upper bearing spring, upper bearing inner race seat and inner race.
  8. Move the turn signal switch to the RIGHT TURN position.
  9. On Deville, Fleetwood, and 1990 Eldorado, and Seville, remove the multi-function turn signal lever as follows:
    1. Make sure the lever is in the OFF position.
    2. Remove the access cover from the steering column housing.
    3. Detach the cruise control wiring connector. Note the position of the connector when installed in the column.
    4. Pull the lever straight out of the turn signal switch.
  10. On Eldorado and Seville, remove the multi-function turn signal lever as follows:
    1. On 1992-93 vehicles, slide the connector cover toward the front of the vehicle.
    2. Unplug the electrical connector. On 1991 vehicles, note the position of the connector when installed in the column.
    3. Push the lever straight in, rotate clockwise 1?4 turn and pull the lever out of the switch.
  11. On Deville, Fleetwood, and Eldorado and Seville, remove the screw, button, spring, and hazard warning switch knob.
  12. On Deville and Fleetwood, remove the one signal switch arm retaining screw. On Eldorado and Seville, remove the 2 signal switch arm retaining screws. Remove the signal switch arm.
  13. Remove the turn signal switch retaining screws.
  14. Remove the wiring protector and detach the turn signal switch connector.
  15. Gently pull the wire harness through the column and remove the turn signal switch. prev.gif next.gif

Nov 12, 2010 | 1992 Cadillac DeVille

1 Answer

Center console disasembly instructions . we are trying to remove the center console


Base Console, Floor, Ranger, Explorer Removal and Installation
  1. Remove the two oval covers from the sides of the floor console. Remove the four (two on each side) retaining bolts. Lift or remove the front seat center armrest (644A22) from the floor console.
  1. Remove one screw from the top rear end of the floor console (directly under the front seat center armrest.
  1. Remove four screws retaining the utility tray beverage holder to floor console. Lift or remove the utility tray beverage holder from the console.
  1. Remove two screws (directly under the utility tray beverage holder) retaining the front end of the floor console to the console panel front mounting bracket.
  1. Lift the floor console from the front and rear console panel mounting brackets.

c758709.gif

Apr 01, 2010 | 1996 Ford Explorer

1 Answer

How to remove the heater core in a 97 cadillac eldorado


remove passenger side dash and you will see it but it is not a easy job good luck

Oct 09, 2009 | 1997 Cadillac Eldorado

1 Answer

How do you remove the center console in a 1982 Mercedes benz 380S


hi,center console or center gear lever cover(wooden console)
  • remove radio,then remove control unit of aircon by pressing down the 2 latch,located in upper edge in radio hole.remove screw in upper part of console
  • remove black cover (look like astray)fold both side,remove screw
  • remove shifting lever
  • try to lift in the console,be careful,sometimes sticky



Mar 21, 2009 | Mercedes-Benz SL-Class Cars & Trucks

7 Answers

Maxi fuse/relay center


HI< The maxi fuses, for a Cadillac deville.
are located Left side of engine compartment, forward of strut mount. Just remove the black cover completly, if you remove the small tap only will find mini fuses, but if you remove completly all the cover you will see the maxi fuses.

Jul 07, 2008 | 1997 Cadillac DeVille

Not finding what you are looking for?
1997 Cadillac Eldorado Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...