Question about 2006 Ford Freestar

1 Answer

P0351 not firing on cylinder 1 and 5

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Put on scanner and lookup code. be careful, this can have you replacing injectors to computer.(comp. can be confused sometimes) my ford truck not firing on 1 and 6. after chasing this for a long time and replacing several parts, found problem to be the egr pre soleonoid. cheap part and easy to replace. computer and several computer operators did not have a clue, did not believe me when I told them what fixed it. still don't. told another person with same problem,fixed his too. his mech. is not happy with me. good luck!

Posted on Apr 15, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error Code P0351 for a 2005 Toyota Avalon


Possible causes
Faulty Ignition Coil 1
Ignition Coil 1 harness is open or shorted
Ignition Coil 1 circuit poor electrical connection
Faulty Engine Control Module (ECM)

What does this mean? When is the code detected? Each ignition circuit is continuously monitored by the Engine Control Module (ECM). The test fails when the ECM does not receive a valid pulse signal from the ignition coil. Possible symptoms Engine Light ON (or Service Engine Soon Warning Light) Lack/Loss of Power Engine may be harder to start Engine hesitation Rough engine idle P0351 TOYOTA Description: The ignition system on the vehicle uses individual ignition coils for each cylinder. The Engine Control Module (ECM) controls each ignition coil operation. The ECM sends a ON/OFF signal to energize the ignition coil to create a spark at the spark plug when a spark is required at the cylinder.

May 29, 2017 | Toyota Cars & Trucks

1 Answer

Trying to find out where the crankshaft sensor is located on Mazda Tribute 2002? Need to change it


2004 Mazda tribute 2.0l manual transmission cranks position sensor tip worn / rubbing. p0351, p0352, p0500, p0320 codes. I have a 2004 Mazda tribute with 2.0l 4 cylinder. 140,000 miles. First problem was it would not start but I could hear the fuel pump run and the engine cranked over. I checked for spark and all four plugs had no spark. p0351, p0352, p0500, and p0320 codes displayed.
I have 12 volts at coil. I decided to remove and inspect crank sensor on the transmission side of the engine ( on engine below thermostat housing bolted to engine block) once i removed it i noticed the tip of the sensor was broken, yes, broken. so I knew i found the problem.
I put a new crank sensor in and the car started but ran for 1 hour idling as if a cylinder was not firing. Then it would not start ever again. I removed my brand new replacement sensor to find the tip was rubbed off enough to see the inside metal. i think it could be a possible warped flywheel but I am having trouble finding diagrams of the excitation part of how the crank position sensor works.
I believe the flywheel has holes that excite the sensor. The tribute does move and clutch works for the hour I had it running, so the manual Trans does work as well as the clutch.
https://electronicshelponline.blogspot.com/

Jul 16, 2016 | 2002 Mazda Tribute

1 Answer

2007 Mercury Milan Premier V6 Misfiring


P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Nov 07, 2013 | Mercury Milan Cars & Trucks

1 Answer

2008ford Taurus x 3.5 engine code p0351 which cylinder is ignition coil A primary secondary and location


the fault is a circuit malfunction. the coil will be attached to no 1 cylinder. Check all connections or replace the coil attached to no 1 cylinder.

Jul 28, 2013 | Cars & Trucks

1 Answer

Need diagram for ignition coils for 2001 Mazda Tribute. Tripping code: P0351 Ignition Coil Primary/Secondary Malfunction???? Thanks


Same as Ford Escape.
P0351 - Ignition Coil A - Primary/Secondary Circuit

Cylinder #1, Pin 26 at the PCM, computer.

I would replace the coil on the plug (COP) for that cylinder and see if its' ok. If not, then it is possible that the bad coil took out the driver in the PCM. The test at Pin 26 to see if the light blinks, must be done with the correct tester or it will damage the PCM.

Hope it's the coil.

report results.

4 cylinder or 6 cylinder engine?

Jul 14, 2011 | Mazda Tribute Cars & Trucks

1 Answer

Ok I was getting P0358 ignition coil H which i believed was cylinder8. I flipped the coil with cylinder7 now im getting code P0351 ignition coil A. Im still not exactly sure what those letters A & H...


Hello, the 300 Series is for plug misfires. The coil problem is designated a 350 Series. Your coils are lettered to follow the cylinder. 1=A, 2=B, 3=C, 4=D, 5=E. 6=F, 7=G and 8=H.

You started with a 350 Series+ 8 which means the coil on cylinder 8 is coil H. You flipped with cylinder 1 which shows a coil defect A. This means the defect followed the coil from H turning into A.

If it had been a plug problem it would have been a 300 Series like 301 for the first cylinder and 302 for the second, etc.

Test the coil, from 1 top contact to the bottom plug contact should be 10,000Ohms.

Feb 08, 2011 | 2003 Lincoln LS

2 Answers

What P0300, P0305, P0306 and P0351 codes means?


HI. The codes and their respective definitions are below.


P0300 - Random/Multiple Cylinder Misfire Detected
P0305 - Cylinder #5 Misfire Detected
P0351 - Ignition Coil A Primary/Secondary Circuit Malfunction
P0306 - Cylinder #6 Misfire Detected

Aug 29, 2010 | 1997 Jeep Grand Cherokee

1 Answer

I have 1996 Dodge Gran Caravan, and it gives me these codes: 27 and 43, what do they mean??


CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal

Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit

CODE 43 - Cylinder Misfire, or Ignition Primary Circuit

CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit

Feb 03, 2010 | 1996 Dodge Caravan

3 Answers

Misfiring


Have your ignition coils replaced

Sep 04, 2009 | 2002 Dodge Stratus

Not finding what you are looking for?
2006 Ford Freestar Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...