How to put fanbelt on 1980 winnebago - 1985 Chevrolet C3500

No power anywhere, no lights, nothing? Check the battery polarity, Red to plus +, black to minus -

Relays normally fit into a socket, so you can't get that wrong.

The starter has a big red wire and a small red wire. Difficult to mix those up.

Did you disconnect the battery? Does it have an alarm and immobilizer?

Fuse Box Diagram

https://www.google.com/search?q=1988+winnebago+lesharo+fuse+box+diagram

Owner Manual

https://www.manualslib.com/manual/924219/Winnebago-1987-1989-Lesharo.html?page=168

..

Just losen the mounting drop the engine abit until its far enough for the fanbelt to pass the mounting and replace it. May i ask are you sure its the fanbelt according to my knowledge ive never heard of a fanbelt on a corsa bakkie where thd engine mounting can prevent it from coming off

You have to do it from underneath and you have to have a belt tensioner tool.

Should be a sticker under the hood.

test the IC regulator and fix it. This control the power in the panel

God bless you

Dennis,
Vauxhall is a brand owned by General Motors and produced in the U.K.

There is a fuse for the auto park that you need to check and also make sure that the reservoir under the winnebago isn"t leaking. There is a green switch under the motor home on the hydraulic unit for the brake that goes bad quit often.

You'll need a socket and rachet or wrench to put on the bolt on the pulley tensioner, usually a 14mm or 15mm bolt, then lift up or push down to relieve the tension from the tensioner on the belt.

about 9500 pounds

its called a serpentine belt to our uneducated colonial cousins