Question about 2006 Mazda 3

Open Question

Horn doesnt work in 2008 mazda3 - 2006 Mazda 3

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: 2008 mazda3

Start by removing the colored strip which is over the radio display.
(best way is to open the glove box and get underneither it, the right end kind of hooks in at an angle while the left end locks in straight. so work your way to the left first and then the right)

once that is removed, you shuold see four (4) standard screws, remove and save them.
You must remove the top air vent piece, just tip up and pull forward gently.
You will have to disconnect the hazard switch plug also

the stereo set can now be removed by pulling forward gently.
Only two cables are connected to the unit, one can be pulled out, the other must be unclipped.

At this point the WHOLE UNIT including DISPLAY should come out of the console.

On mine, there were directions on how to install and uninstall the CD/MP3 player and if you flip it over you can see where the MINIDisc would go (if you don't have one)

That's it!

Posted on Jun 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The horn and the alarm is not working in a 2008 Ford Fusion and the fuse are good


Is this a factory alarm or a add on weekend boy racer type thingy ,if the later cut it out the system as they always go wrong when they get old

Sep 08, 2013 | Cars & Trucks

1 Answer

My 2008 Chrysler 300 would not start. I turned the iginiton key and nothing turns on, not even my AC, Radio, or not even my blinkers. My battery is full charge and even my front lights work. Also, not even...


you can check the ignition switch but for such a young car its pretty unlikely. If its not the ignition switch then you have an electrical wiring issue and those are typically very complex.

Aug 28, 2011 | 2008 Chrysler 300

1 Answer

When i click the keys to lock the car the lights flash, no beep from horn. I tried to push on horn. doesnt work either... HELP!!!


check your owner manual for fuse location for horn first if ok then see if you have power to the horn with a tset light when applied if yes you have abad hern

Feb 09, 2011 | 2008 Hyundai Elantra

1 Answer

How do i reset the airbag light on my 2008 mazda3


This is normally caused by moving the front seat back and forth and making the airbag connection under the seat loose. You should have your airbag system scanned with a computer. This will tell you where the problem is. You could check the connections under seat yourself first.

Jan 28, 2011 | 2008 Mazda MAZDASPEED MAZDA3

1 Answer

2007 mazda3 hatchback rear passenger floorboard gets soaked, doing this also when it doesnt rain, could an a/c line be stopped up and where would the line be located?


couldn't be an a/c line unless it has rear air, does the front passenger floor board get wet also, if it does it is probably the a/c drain tube for the evaporator core box.

Aug 23, 2009 | 2008 Mazda Mazda3 Hatchback

1 Answer

2008 mazda3


Start by removing the colored strip which is over the radio display.
(best way is to open the glove box and get underneither it, the right end kind of hooks in at an angle while the left end locks in straight. so work your way to the left first and then the right)

once that is removed, you shuold see four (4) standard screws, remove and save them.
You must remove the top air vent piece, just tip up and pull forward gently.
You will have to disconnect the hazard switch plug also

the stereo set can now be removed by pulling forward gently.
Only two cables are connected to the unit, one can be pulled out, the other must be unclipped.

At this point the WHOLE UNIT including DISPLAY should come out of the console.

On mine, there were directions on how to install and uninstall the CD/MP3 player and if you flip it over you can see where the MINIDisc would go (if you don't have one)

That's it!

Jun 12, 2008 | 2008 Mazda Mazda3 Hatchback

Not finding what you are looking for?
2006 Mazda 3 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...