Question about 1988 Mazda B2200

Open Question

Fuel relay on a 1991 mazda 2200 - 1988 Mazda B2200

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: i am having trouble locating

YOU HAVE FUSE RELAY BOX IN THE ENGINE COMPARTMENT NEAR THE BATTERY AND YOU HAVE FUSE PANEL UNDER THE LEFT SIDE OF THE DASH.FUSE RELAY COVER SHOULD HAVE FUSE RELAY LOCATIONS OR LOOK IN OWNERS MANUAL IN GLOVE COMPARTMENT.

Posted on Jul 19, 2011

Ironfist109
  • 3018 Answers

SOURCE: WHERE IS THE FUEL PUMP

  • Under the dash on the drivers side. When under the dash look for a yellow connector that is clipped to a bracket sort of by the shaft of the steering wheel.
  • See pic for further help.

ironfist109_185.jpg


  • The lower steering wheel cover just has a couple screws that you remove and then it pulls off exposing the area you see above.
  • Then you just move some of the wires to the side and you will see the fuel pump relay as I have indicated.
  • Should have the number B577 if no one has replaced it yet.


  • Hope this helps and thank you for using FixYa.

Regards, Tony

Posted on Jul 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1991 mazda mx3 wont start. It wont start by key but starter jumps, still no soark not sure about fuel. Last time it ran it started but it stalled and wontnstart again. Help me plz ?


It won't spark if no fuel reaches injectors check if you have fuel pressure. If not migh have frozen fuel filter it it havent been changed in the last two years or ever ..change it

Mar 02, 2016 | Mazda Cars & Trucks

1 Answer

Mazda 626 2.2 1991 fuel pump no power


if the fuel pump has no power it can be due to a broken wire most is to a blown or overloaded relay that are located under your hood

Jan 20, 2015 | Mazda Cars & Trucks

1 Answer

What is the location of the fuel pump relay?


0996b43f80220d73.jpg I could not find any relay this is how to test fuel pump

Oct 13, 2014 | 1991 Mazda MX-6

1 Answer

I have a 1991 Mazda 626 that wont start


Look at the top of the engine and locate the fuel rail on the injectors. There should be a Schrader valve on the rail. Take a small screwdriver or a nail and push in on the Schrader valve. Have the helper turn the key on and look for fuel pressure at the valve. If there was no Schrader on the rail, just loosen the fuel line for the same results. If there is no fuel expelled, check the fuel pump fuse and relay located in the relay box. If these are not faulty, the fuel pump has failed and is need of replacement.

Apr 05, 2014 | 1991 Mazda 626

1 Answer

Location of Fuel pump relay for 1991 Mazda 626


The relay is in the left rear corner or drivers rear under the hood back by the windshield.

Jun 23, 2012 | 1991 Mazda 626

1 Answer

I am having trouble locating the fuel pump relay on my mazda mx6 1991???? i found the fusalbe link box. and another box with relay looking things on the drivers side fire wall??? is that it??? Witch relay...


YOU HAVE FUSE RELAY BOX IN THE ENGINE COMPARTMENT NEAR THE BATTERY AND YOU HAVE FUSE PANEL UNDER THE LEFT SIDE OF THE DASH.FUSE RELAY COVER SHOULD HAVE FUSE RELAY LOCATIONS OR LOOK IN OWNERS MANUAL IN GLOVE COMPARTMENT.

Jul 17, 2011 | 1993 Mazda MX-6

1 Answer

What is the torque setting for the crankshaft bolt on a 1997 Mazda B6 8valve carburettor engine and also for th water pump bolts?


What motor....L 4-218cc 2.2L 2200 2-bbl
L4-218cc 2.2L 2200 MFI or L4-2606cc 2.6L SOHC ?????

Jun 04, 2011 | 1991 Mazda B-Series

2 Answers

I have a 1991 Mazda 929. I am having problems starting it. The battery is a good battery, however I do not think it is getting enough gas to the engion. I do not know if I need to replace the fuel pump or...


Thanks for choosing FixYa and welcome to the site. When you first turn the key, you should be able to hear the fuel pump kick on. You should hear a buzzing sound for a second or two. It may be the fuel pump, clogged filter, bad injectors, fuel pump fuse, relay, or reset, if equipped. It could be in the ignitions. Let me know if the pump is kicking on and we will take it from there. If it is not, check to see if it is the fuel pump fuse or relay. I am not sure which ones you have. It should be marked in the fuse box though.

Mar 30, 2011 | 1991 Mazda 929

1 Answer

1991 I replaced fuel pump & filter..would net run over 2200 RPM


did u change fuel pump relay its common for them to act up especially with the high temp under that hood

Dec 16, 2008 | 1991 Chevrolet Corvette

1 Answer

91 miata mx-5 cuts out at 2200 rpms- cant smog- check eng. lite isn't on


Sounds like petrol starvation - the pump may be in need of replacement.

Oct 14, 2008 | 1991 Mazda MX-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...