Question about 2002 Lexus SC 430

Open Question

How do i replace the bulb in the passenger side dome/map/personal light ?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 1998 lexus es 300 dome light

Use a small thin blade screwdriver. Gently pry off where the small slots are located.

Posted on Nov 10, 2008

  • 17 Answers

SOURCE: running lights

Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the bulb on the passenger side dimer but it still not working.


The fuse my have blow when the bulb did, check and see if you have power and ground at the dome light, if so, check the new bulb for continuity , if not, check the dome light fuse.

Dec 06, 2015 | 2006 Nissan Altima 2.5

1 Answer

Why my interior light want come on!!??


Check the dome light switch. I believe its between the map lights in the front overhead console. You can set it to Always Off, On with Doors, or Always On.

The Dome light and the cargo area light should come on when the door is open and the switch is set to door position, or when set to the always on position.

If only one of the lights come on change the bulb of that light. If neither light comes on change the fuse.

I believe the instrument panel fuse block is located on the passenger side of the center console, to the left of the glove box near the floor. The cover usual lists where and what each fuse does. Look for Interior Lighting, I believe #23. Pull the fuse and check if its broken. If it is replace it. If not you may have electrical issues.

Oct 17, 2014 | 2008 Chevrolet Equinox

1 Answer

Why the dome light on the rear passenger side does not turn on when the doors are open. It does work when it pressed on though.


FIRST THING YOU DID NOT MENTION , DID YOU REPLACE THE LIGHT BULB ?
DID YOU CHECK FOR POWER TO THE UNIT,
GOOD TIME TO DO THAT IS WHEN YOU CHANGE THE LIGHT BULB, THEN CHECK FOR GROUND ON THE OTHER SIDE OF THE BULB, FIX MISING POWER OR GROUND, OR REPLACE BULB.

May 23, 2014 | BMW X3 Series Cars & Trucks

1 Answer

I just bought a 2006 Suzuki Forenza Wagon. Has 136,*** miles on it, but drives great. But, the back seat dome light doesn't work. I bought replacement bulbs, but i can't figure out how to pop the c


I don't know for sure but some cars have a "DOME OVERRIDE" button usually somewhere the light switch on the dash. Not seeing your car the dome covers mostly require only slight pressure on either of the longer sides to remove, press against the side and at the same time pull downward.

Feb 02, 2014 | 2006 Suzuki Forenza Wagon

2 Answers

Interior lights problem on a 2006 Lexus SC430


Only one light inside light works on my Lexus SC430 and I have been told that I have to replace the whole part which is about $700 because it is computerized. Is this true

Aug 10, 2012 | 2006 Lexus Sc 430

1 Answer

2005 chevy suburban- my back-up lights and interior dome lights do not work. All fuses appear intact? Suggestions?


you bcm (body control module is bad) to have the dealer replace it will run you about $400. a quick fix for the reverse light is to splice 2 wires into the wire for the center plug in your trailer wiring. now run a wire up to each reverse light, cut the green wire to each reverse light and **** conect them up. this is a seperate revers feed than the one from the bcm. the dome lights remove the light cover on the second set of interior lights (the one between the drivers seats). the two side bulbs are map lights the center bulb is for the dome lights. run a jumper wire from the right or leftside socket to the center socket. you dome lights will now turn on with just the use of that switch i replaced the back bulbs with led's soo there is no extra amp's being drawn. you could bypass the bcm but i could not find any wiring diagrams for it and i dont know if it can take the added amp's

May 31, 2010 | 2005 Chevrolet Suburban

1 Answer

Replaced map/dome/door bulbs with vleds bulbs, bent map light socket and tried to fix with screwdriver, caused spark, now none of the mentioned lights work and dash clock reset to 1:00 Blown fuse? Fuse...


Blown fuse. Do you have your owner's handbook? The fuse should be labeled. The location will be inside the car. Look under the dash on the driver's side and you may have to pull fuses to make sure they are good, but it should be only 1 fuse.

May 13, 2010 | 2008 Toyota Tundra

1 Answer

Bulb replacement


the map light should come off if you push up and back on it just grip the edges of the light cover and push gently up and back. it should pop right off and then you can replace the small bulb

Feb 22, 2009 | 2002 Oldsmobile Alero

Not finding what you are looking for?
2002 Lexus SC 430 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...