Question about 1999 Peugeot 206

Open Question

Engine light diagnostic check showed code p0440 evap emission contro

P0440

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine codes p0440,p0441


code po440 refers to evaporative emission (EVAP) system--malfunction ===causes --hose connections --intake leak--EVAP canister purge valve
code p0441 refers to EVAP system--incorrect flow detected===causes---hose connections --intake leak--EVAP canister purge valve.
once you fix the fault use a scanner to reset the engine light.

Apr 09, 2014 | 2005 Chrysler Town and Country

1 Answer

Check engine light shows OBD fault code P0440 EVAP Ctrl System Malfunctionfree engine fault codes


code p0440 refers to evaporative emission (EVAP)system malfunction===causes--hose connections--intake leak--EVAP canister purge valve. Check all hose connections and replace the canister purge valve.. If you can locate the unit you should be able to replace it yourself

Sep 21, 2013 | Daewoo Leganza Cars & Trucks

1 Answer

Toyota echo won't start code 440 441 446


Error Code: P0440
Fault Location:
Evaporative Emission (EVAP) System - Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Soution:
Check Evaporative Emission (EVAP) System Sealing.
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .

Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.

Error Code: P0446
Fault Location:
Evaporative Emission (EVAP) System, Vent Control - Circuit Malfunction
Possible Cause:
Wiring harness.
Evaporative emission (EVAP) canister purge valve.
Engine control module (ECM).

Feb 25, 2013 | 2002 Toyota ECHO

1 Answer

Solution for 1999 chevy cavalier code p0440


There has been a service bulletin isued for that code. I have run into this before, also the wires comming out of the connector. That would bethe first thing to check. Here is what the bulletin states. Emissions - SES Lamp ON/DTC P0440 (EVAP) SetNotesFile In Section: 06 - Engine/Propulsion SystemBulletin No.: 02-06-04-044Date: August, 2002TECHNICALSubject: Service Engine Soon (SES) Light Illuminated, DTC P0440 Set (Replace Fuel Tank Evaporative Emissions Control System (EVAP) Vent Solenoid Harness) Models: 2000-2002 Chevrolet Cavalier2000-2002 Pontiac Sunfire ConditionSome customers may comment that the SES light is/was illuminated.A technician may find DTC P0440 is stored in the PCM.CauseThe EVAP solenoid harness may be misrouted around the rear antilock brake (ABS) wire harness causing a chaff/damage to the EVAP vent solenoid harness, setting DTC P0440.CorrectionFollow the service procedure below to diagnose and correct this condition.1. Install a Tech 2 scan tool and select the appropriate vehicle. Verify that a DTC P0440 is stored in the PCM. 2. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle in General Information (SI Document ID # XXXXX).

4_9_2012_3_31_41_pm.gif

Locate and inspect the EVAP vent solenoid harness (3) routing. The harness may be routed below the ABS wiring harness (4) at the right rear corner of the fuel tank, causing stress on the EVAP solenoid harness (3).



4_9_2012_3_32_10_pm.gif

4.Disconnect the EVAP vent solenoid harness (3) from the EVAP vent solenoid (2) and connector C313 (1). Discard the EVAP vent solenoid harness (3).


5.Connect the new EVAP vent solenoid harness (3), P/N 22687059, to the EVAP vent solenoid (2), route the harness above the rear ABS harness (4) and connect the EVAP vent solenoid harness (3) to connector C313 (1).


6.Lower the vehicle.


7.Clear the DTC's with the Tech 2 scan tool.



If all of the wires are good you will want to check for any leaks in the evap system.



Hope helps.

Apr 09, 2012 | 1999 Chevrolet Cavalier

1 Answer

What does code t0440 mean on a 2003 malibu


Do you mean "P0440"?

Diagnostic Test Code (DTC) P0440 has a generic description of "Evaporative Emissions System Large Leak".

The MOST COMMON cause of this code is refueling the vehicle with the engine running or not getting the fuel cap on correctly after refueling.

The Powertrain Control Module (PCM) checks for leaks in the Evaporative Emissions (EVAP) system using the data provided by the Fuel Tank Pressure (FTP) sensor. It will check the FTP sensor data, then close the EVAP Vent Valve and open the Canister Purge Valve to apply vacuum to the EVAP system. After a period of time, the PCM will again check the FTP data to see if the fuel tank pressure has dropped within a specified amount. If there is very little or no change in the FTP data, DTC P0440 sets.

Other possible causes for this code are:

> Defective FTP sensor (VERY RARE)
> EVAP Vent valve stuck open
> Canister Purge Valve stuck closed
> Large leaks or cracks in any of the EVAP system hoses and/or lines and/or components, including the fuel tank and the fuel filler neck and the EVAP canister

Please note that this code indicates a MECHANICAL failure of the system. This is NOT a circuit fault that would involve broken/shorted wires, blown fuses, etc..

Nov 12, 2011 | 2003 Chevrolet Malibu

2 Answers

Check Engine lite comes on Code PO440


16824/P0440/001088 - EVAP Emission Control Sys: Malfunction Possible Symptoms
  • Malfunction Indicator Light (MIL) active
Possible Causes
  • Evaporative Emission (EVAP) System leaking
  • Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty
  • Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty
Possible Solutions
  • Check Evaporative Emission (EVAP) System Sealing
  • Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
  • Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)

Jun 17, 2010 | 2000 Volkswagen Beetle

3 Answers

Check engine light came on, says its a evaporative emission system, code# P0440, what is that?


What does that mean?
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Possible Causes:
A code P0440 could mean one or more of the following has happened:
  • The gas cap is not installed or working properly
  • The purge solenoid has failed
  • The canister is plugged and not working properly
Possible solutions:
With a P0440 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Remove and reinstall the gas cap, clear the code, and drive for a day and see if the codes come back.
  • Inspect the EVAP system for cuts/holes in tubes/hoses
  • Inspect for damaged or disconnected hoses around the Evap purge solenoid
  • Check and/or replace the sensor
  • Check and/or replace the purge valve
  • Have a professional use a smoke machine to detect leaks
HTH,

Mike...

Dec 04, 2009 | 1996 Chevrolet Cavalier

3 Answers

What is a p0440 problem?


Hi there,

Oldsmobile code P0440 refers to: Evaporative Emission System

This means there is a problem with the Evap System, and you will need to inspect the related components:

- Purge Solenoid:

Related Symptoms
  • Stalls after start with a hot engine
  • Poor Fuel economy
  • Emission related faults
- Evap Canistor: Check evap canistor for loose carbon.

- Evap Canistor Vent Valve:

Related Symptoms
  • Poor fuel economy
  • Stalls after start
  • Emissions related failure DTC codes
Hope this helps...

Cheers,

Nov 12, 2009 | 2001 Oldsmobile Alero

3 Answers

Check Engine Light won't go off


If you have an Advance Auto Parts store where ever you are, they will read the code and tell you exactly what to code is and what it means. Any mechanic who "guesses" isn't a mechanic at all - he's a thief. Emissions leak can be any number of things, but not the gas cap!

Aug 21, 2009 | 2003 Dodge Caravan

1 Answer

1999 pontiac sunfire code p0440


P0440 - Evaporative Emission (EVAP) System, this code is most often caused by leaving the gas cap loose, or off.

Sep 21, 2008 | 1999 Pontiac Sunfire

Not finding what you are looking for?
1999 Peugeot 206 Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...