Question about 2003 Volvo XC90

Open Question

Looking for location of pcv valve on 2003 volvo xc90 2.9 turbo

Location of pcv valve

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 80 Answers

SOURCE: volvo 940 turbo oil control valve location

take off pipe going to the intercooler from the turbo see if oil is found and clean then other pipe from incooler check it .if oil is found .drain oil in intercooler .you have an oil leak from the turbo this is why you will have light on far left of dash

Posted on Apr 28, 2009

  • 60 Answers

SOURCE: looking for 1995 volvo 850 turbo vacuum line schematic diagram

This is for a 98 T5, but it should be close enough. http://www.matthewsvolvosite.com/forums/viewtopic.php?p=93956#p93956

Posted on Oct 20, 2009

  • 1 Answer

SOURCE: pcv valve location

volvo s80 y reg 2.4 runs ok little bit lumpy tickoover when warm but very loud whistling noise take dipstick it stops but very big suction from tube not pressure it is not breather box under manifold

Posted on Mar 12, 2010

  • 1 Answer

SOURCE: where is the pcv valve located on a 1996 Volvo

there is no pcv valve on the 960 ....there is a flame trap which is located on the air snorkel next to the throttle body its black and and has a large hose coming off of it as well as a smaller vacuum line

Posted on Jan 06, 2011

  • 1 Answer

SOURCE: 95 volvo 850 burning oil. no leaks. How do i check

Hi, I have a 1996 Volvo wagon 850 turbo. I just bought it and when you hold the rpm's at 3 and a half it was blowing out smoke after about 600 miles it stoped smelling like burning oil and doesn't blow out any smoke. But I use a court of oil in about every 150 miles. What could this be?
Thank's Jodie

Posted on Sep 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 genesis coupe 3.8 pcv valve location


There is a small hose going into the valve cover in which you need to unscrew the PCV valve with a socket after removing the small hose. If you have a turbo the hose will be in the front of the car under where it says genesis turbo. It is a small hose with a bend in it and it will Come off with two Spring clamps. The PCV is in the valve cover

Sep 02, 2016 | 2010 Hyundai Genesis Coupe 3.8

1 Answer

My Volvo s40 2.0 none turbo burns oil and is slower and misfires sometimes hard start when hot what causes this?


Burning oil may be the cause of the rest. Bad PCV system? Worn rings? Bad valve guide seals? Fully describe how and when it burns oil.

Aug 03, 2015 | 2003 Volvo S40

1 Answer

Where is the pcv valve on volvo s60 2.0T 2002


The PCV ( Positive Crankcase Ventilator ) valve is located in a valve cover. It is identifiable by the largish hose ( usually about 1/2 - 3/4 inch diameter )going from it to the intake system. If you have a throttle body injection system, the PCV hose will go to the throttle body. Typically PCVs are on the passenger side of the motor.

Feb 21, 2015 | Volvo S60 Cars & Trucks

2 Answers

My 1994 volvo 850 is leaking oil from the filler cap...why?


Clogged up PCV System ---maybe

Too much crank case pressure

Nov 29, 2012 | 1994 Volvo 850

1 Answer

How do i change the pcv valve on my 2004 volvo s40? and where is it located?


location:Its a flame trap it separates the oil from ai
replacement:

  • 1

    Turn the Volvo 850 off and allow the engine and its components to cool for 30 minutes.

  • 2

    Open the hood of the Volvo 850 by pressing the hood release button within the vehicle. Locate the PCV valve; the valve is identified as a small rubber valve located on the engine crankcase. You will also notice a small hose sticking out of the end of the valve. If needed, read the Volvo 850 owner's manual for more information.


  • Disconnect the hose from the valve by pulling the hose out of the valve. The hose will come off the valve with minimal force.

  • 4

    Turn on the engine of the Volvo 850. Place your finger over the hole in the valve where the hose was connected. If you feel a strong suction, the valve is working properly and fine. If you do not feel a strong suction, the valve may be clogged and needs replacing.

  • 5

    Turn off the engine of the Volvo 850. Use needle-nose pliers and grip the valve. Pull the valve off of the crankcase.

  • 6

    Install a new valve by putting the valve in place on the crankcase. Insert the hose into the new PCV valve. Secure the new valve in place by pushing it down until it locks into place. Close the hood of the Volvo; pull up on the hood to ensure the hood is shut properly.


    X2 Performance Chip


  • Jun 19, 2012 | Volvo S40 Cars & Trucks

    1 Answer

    Where is the pcv valve on a 2003 honda civic?


    It will be located on or near of the valve covers .. Its looks like this (B)



    2_8_2012_4_06_39_am.jpg

    Feb 08, 2012 | 2003 Honda Civic

    1 Answer

    Wheres the pcv valve located on a 1994 volvo GLT.


    The term PCV means positive crankcase ventilation valve and it should be sticking in the valve cover with a vacuum hose attached to it. Hope this helped and best wishes.

    Sep 24, 2009 | 1994 Volvo 850

    1 Answer

    98 Volvo V70 Turbo engine oil leak


    It may be the gromet for the PCV valve or it could be the spark plug rubber seal located in the valve cover if it is the type of engine that has the wires and spark plugs that go down through the valve cover, if this is the case buy a valve cover gasket with the rubber gromets that are located around the base of the hole where spark plugs fit through and install.

    Jul 08, 2009 | 1998 Volvo V70

    1 Answer

    PCV Valve replacement for 2000 non-turbo Volvo S-80


    hi, this is not hard. the valve run into the valve cover and the price for a pro to fit should be around 50 dollars tops. i would do it for 30.

    May 21, 2009 | 2001 Volvo S40

    3 Answers

    Where is the pcv valve located on a 2003 ford ranger


  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Feb 27, 2009 | 2003 Ford Ranger Regular Cab

    Not finding what you are looking for?
    2003 Volvo XC90 Logo

    Related Topics:

    30 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volvo Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8210 Answers

    Are you a Volvo Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...