Question about 2010 Renault Clio 1.2

Open Question

Renault faults Ball joint dust covers split on renault wind 2011 model done 13000 miles

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 110 Answers

SOURCE: how do i replace a offside front lower suspension arm ball joint

You need to get or rent a ball joint splitter, maybe $20? or so to buy.   Some parts stores (autozone does this, one reason i recommend them, but other stores may also) will rent you some tools for "free" when you buy parts there .. they take a big deposit in case  you bolt ... but give it all back for return of the tool in good condition.  
 It's easy ... if you know how to work on suspension .. if not, get a Haynes manual for your car from part store, amazon or haynes.com for around $20,  the blood and busted knuckles you save due to reading it will be worth the money ;~).

Posted on Oct 30, 2008

alicantecoli
  • 22114 Answers

SOURCE: renault senic o4

dammed renault electrics ,,new ECU is cure buy a ford or an opel always problems with this froggy ****

Posted on Nov 15, 2008

  • 24 Answers

SOURCE: Bottom ball joint worn on steering of 03 Renault

if your not an eperence mechanic the best and easy way is to change the whole bottom arm this is alittle more money but alot quicker and easyer for a non mechanic. first you will need to remove the ball joint from the hub the best way to do this is with forse and a hammer . Then you will need to remove the 2 botls that holed the arm to the subframe then the arm should drop out you may need to help it with a hammer lol. And just reverse what you did to fit the new arm making sure to fit the ball joint back into the hub last .

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to change my upper ball joint. Passager side


For your problem,check out this few help links.

Click the link below to go through its procedure:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html------- How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html------- How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html------ How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html----------- How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html--------- Lower Ball Joints replacing on Mitsubishi car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
-------------These details will help.For more help,keep updated,with car brand,model and year.Thanks.Helpmech.

Oct 05, 2012 | Cars & Trucks

1 Answer

How to change a Xantia bottom ball joint


Depressurize the hydraulic system. Jack the front and put on jack stands (both left and right side). Remove wheels. Slacken and unscrew the ball joint nut partially. Release ball joint from knuckle using a proper separation tool. Once dislodged, remove ball joint nut and pull out strut/knuckle away from lower arm. You may need to push down the arm with a lever. Remove dust cover from the ball joint. The ball joint can be removed by unscrewing it using a tool that locks into the notches on the sides of the ball joint. Install new one by screwing in the ball joint back into the knuckle.Tighten well.

Sep 01, 2012 | 1998 Citroen Xantia

2 Answers

I have a '95 Chevy Silverado 2500 7.4L 2wd, I seem to be going through ball joints rather quickly. I replace them at least once a year. Is this something that is problematic with this model or is


Many other users are noticing problem issue with ball joints.Always replace original parts instead of aftermarket parts.They dont last long.--------Before replacing ball joints ,i suggest to test and inspect the ball joints:----Click the link below for its procedure:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing on Mitsubishi car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
--------This will help.Thanks.

Feb 08, 2012 | 1995 Chevrolet Silverado 2500

2 Answers

How to replace ball joints on a 1998 mercedes benz s420


For ball joints issue.Before replacing it,first inspect and test the ball joints to confirm the problem:----Click the help links below to troubleshoot the problem and replace the ball joints:----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html----------This will help.Thanks.

Jan 31, 2012 | 1991 Mercedes-Benz 420

1 Answer

Have had to replace ball joints 3 times on my 97 lumina, any ideas why


Always use original parts instead of aftermarket products.Original parts cost bit extra,but they are exact fit and last longer.Click this link below to troubleshoot the issue :----Upper Ball Joints inspection and replacement? http://howtobyme.blogspot.in/2012/02/upper-ball-joints-inspection-and.html How to Test Upper and Lower Ball Joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-test-lower-ball-joint.html How to inspect Upper and Lower Ball joint? http://repairhelpcenter.blogspot.com/2011/12/how-to-inspect-lower-ball-joint.html How to Service Ball Joints on Car? http://repairhelpcenter.blogspot.com/2011/12/how-to-service-lower-ball-joints-on-car.html How to Replace Ball joints? http://repairhelpcenter.blogspot.com/2011/12/how-to-replace-lower-ball-joints.html Lower Ball Joints replacing on car? http://howtobyme.blogspot.in/2012/02/lower-ball-joints-replacing-on.html
---------This will help.Thanks.

Jan 17, 2012 | 1997 Chevrolet Lumina

1 Answer

How do you put in a ball joint in a 2001 sebring convertible


It depends on exactly which ball joint of the 3 per side your changing, but here are the details.

COMPRESSION LOWER ARM & LATERAL LOWER ARM ASSEMBLIES
Removal
1. Loosen compression lower arm ball joint nut. Using steering linkage puller, separate ball joint and
knuckle. Remove nut, bolts and compression lower arm assembly. Remove dust cover.
2. Remove stay. Remove shock absorber lower mounting bolt. Loosen lateral lower arm ball
joint and knuckle nut. Using steering linkage puller, separate ball joint and knuckle. Remove nut, bolt and
lateral lower arm assembly. Remove dust cover.
Inspection
Using preload socket, ensure breakaway torque for compression lower arm ball joint is 4-22 INCH lbs. (0.5-2.5
N.m) for 2000 models. On 2001 models, breakaway torque is 22-54 INCH lbs. (2.5-6.1 N.m). Ensure
breakaway torque for compression lateral lower arm ball joint is 13 INCH lbs. (1.5 N.m). Check compression
lower arm, lateral lower arm, dust covers, and bushings for damage and wear.
Installation
To install, reverse removal procedure. Use NEW ball joint nuts. Lubricate lip and inside of dust cover with
multipurpose lubricant. Using installer, install dust cover. Check front wheel alignment.
UPPER ARM ASSEMBLY
Removal
Using steering linkage puller, loosen upper arm ball joint and knuckle nut. Remove self-locking nut. Remove upper arm and upper arm shaft assembly. Remove dust cover.
Inspection
Using preload socket, ensure breakaway torque for upper arm ball joint is 3-13 INCH lbs. (0.3-1.5 N.m).
Replace upper arm assembly when measured value exceeds specification. Check upper arm, dust cover, and
bushings for damage and wear.
Installation
1. To install, reverse removal procedure. Use NEW self-locking nuts. Lubricate lip and inside of dust cover
with multipurpose lubricant. Using Ball Joint Installer (MB990800), install dust cover.
2. Ensure upper arm shaft assembly is installed at indicated angle. Verify upper arm shaft
assembly installation. Check front wheel alignment.

Once you have the correct arm off and a replacement joint (if available, some are not serviceable and require the arm to be replaced) then you will need a press or a ball joint press to change the joint. Such as
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38335

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46389

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=66958

or http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=46967

Mar 17, 2010 | 2002 Chrysler Sebring

1 Answer

2002 CELICA WITH 90,000 MILES WHAT KIND OF SERVICE DO I NEED?


Normal Maintenance Details
90,000 Miles (144,000 Kilometers) : All Applicable Models

INSPECT AUTOMATIC TRANSAXLE FLUID
INSPECT BALL JOINT & DUST COVERS
INSPECT BALL JOINTS
INSPECT BRAKE DISCS/ROTORS
INSPECT BRAKE DRUMS & LININGS
INSPECT BRAKE HOSES
INSPECT BRAKE LINE PIPES
INSPECT BRAKE PADS
INSPECT DIFFERENTIAL FLUID
INSPECT DRIVE BELTS
INSPECT DRIVESHAFT/PROPELLER SHAFT DUST BOOTS
INSPECT EXHAUST PIPES & MOUNTS
INSPECT FUEL LINES & CONNECTIONS
INSPECT FUEL SYSTEM
INSPECT FUEL TANK BAND
INSPECT FUEL TANK CAP GASKET
INSPECT FUEL VAPOR SYSTEM
INSPECT MANUAL TRANSAXLE FLUID
INSPECT STEERING GEAR/RACK
INSPECT STEERING LINKAGE
REPLACE AIR CLEANER/ELEMENT
REPLACE COOLANT
REPLACE ENGINE OIL
REPLACE ENGINE OIL FILTER
ROTATE TIRES

Jan 22, 2010 | 2002 Toyota Celica

1 Answer

I have a Renault megane I hatchback 2003 model.


If CV-joint is OK check stabiliser bar ends.There is two push rods with ball joints.If they is OK check shock absorber

Dec 02, 2009 | 2003 Renault 181

1 Answer

My windscreen wont work


easy problem to solve. open bonet look at bottom of wind screen you may have to take plastic cowl of wiper linkage. 3screws. linckage will have jumped off ball fixing . put some grease on ball slip on linckage will be tight but will go on job done.

Mar 04, 2009 | 1986 Renault Sport

Not finding what you are looking for?
2010 Renault Clio 1.2 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

xxxxxx xxx

Level 3 Expert

4844 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...