Question about 2003 Cadillac Seville
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If its in the engine compartment there is an antifreeze leak..If it inside the car like like near to the windshield, you have a bad heater core. Good Luck contact me if you need more help.
Posted on Dec 28, 2008
SOURCE: Replace tail lights
Usually all you have to do is pull back the inside trunk liner behind the tail lights from inside the trunk, or there may be a plastic door that you open to access the tail lights. The wires going to the tail lights connect to a plug that you turn counter clockwise and pull out from the back of the tail light assembly. Once you have removed the connector replace the bulb. Some light bulbs just pull straight out of the connector, others you may have to push in and turn counter clockwise to remove.
Posted on Jan 17, 2009
If you have power windows start by disconnecting your negative battery cable. Then you need to locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Once you remove the screws that hold the door handles, remove any wire connectors to the handles, if they're not power you will need a small hook (kinda like a knitting needle) to remove the window crank. A manual window crank is held in place by a clip on the base. Slide the hook behind the base and remove the clip. The door panel itself, is held on by snap in clips, and you will need a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are removed from the door, pull the panel upward to remove it from the door.
Install in reverse.
I hope this helps you, and I wish you luck on your repair.
Posted on May 10, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
Tips for a great answer:
Oct 30, 2015 | Cadillac Cars & Trucks
Oct 10, 2014 | 1997 Cadillac Seville
Jul 18, 2014 | Cars & Trucks
Apr 29, 2014 | Cars & Trucks
Dec 22, 2013 | 2001 Cadillac Seville SLS
Apr 12, 2013 | 2004 Cadillac Seville SLS
Jun 24, 2010 | 2001 Cadillac Seville
Oct 03, 2008 | 2001 Cadillac Seville
Mar 28, 2015 | 2003 Cadillac Seville
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: