Question about Toyota Passenger

1 Answer

How do you remove the wiper arms to replace wiper blades on an import toyota lucida/emina

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Take it to a parts store they will do it for free, there is a U shaped device that you have to move in order to get them off, and I don't know if your replacing the blade or the wiper assembly they are different. You should replace the assembly as they were out over time and will not clean the whole mirror.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front drivers wiper not working


I have the same problem. When I removed the drivers side wiper arm, I found that the nut that held the arm in place was only finger tight, which allowed the arm to raise slightly off the splined shaft. This caused the shaft to strip the splines out of the wiper arm.. after inspecting and cleaning the shaft, it appears that the splines on the shaft are still in decent shape. You may need to only replace the wiper arm. About $50 at a few online toyota parts sellers. replacing it is simple and requires only a flat blade screwdriver to remove the black cap off the nut, and a wrench to remove and replace the nut. simply remove the nut, and pop off the wiper arm. push the new arm onto the splined shaft pointing the same place as the passenger side wiper, then tighten the nut down. I would also suggest wiping the metal shavings off the splined shaft with some sort of abrasive pad, like scotchbrite, before putting the new wiper arm back on. I hope this helps.

Jan 27, 2013 | 2007 Toyota Highlander

1 Answer

Engine schematics 2002 pontiac montana


Hi there:
Isnt a diagram but If you have removed the motor, here is the motor installation procedure....

INSTALLATION PROCEDURE

6_23_2012_11_48_33_pm.gif

Align the wiper motor to the wiper drive system module. NOTE: Refer to Fastener Notice in Service Precautions.
Install the wiper drive system module to wiper motor screws. Tighten Tighten the wiper drive system module to wiper motor screws to 7 N.m (62 lb in) .
Connect the electrical connector to the wiper motor.
Install the crank arm on the wiper motor.


6_23_2012_11_49_39_pm.gif

Rotate the washer solvent container into the installation position.
Install the washer solvent container screws. Tighten Tighten the washer solvent container screws to 6 N.m (53 lb in) .
Inspect the wipers for proper operation.


6_23_2012_11_51_04_pm.gif

Also, here is the crank arm procedure...

REMOVAL PROCEDURE

Remove the wiper system module cover.
Remove the drive link from the wiper motor crank arm.

2.1. Loosen the drive link screws.
2.2. Remove the drive link from the wiper motor crank arm.

Remove the wiper motor crank arm cover and seal.
Remove the wiper motor crank arm from the wiper motor.

4.1. Loosen the wiper motor crank arm screw.
4.2. Tap on the wiper motor crank arm screw with a soft-faced mallet while holding up on the wiper motor crank arm until the wiper motor crank arm loosens from the wiper motor.
4.3. Remove the wiper motor crank arm screw and the wiper motor crank arm from the wiper motor.

INSTALLATION PROCEDURE


6_23_2012_11_52_10_pm.gif

Install the wiper motor crank arm onto the wiper motor.

1.1. Turn the ignition switch to the ACCY position.
1.2. Set the wiper switch to PULSE position. The wiper motor should be operating.
1.3. Turn the ignition switch to OFF when the wiper motor is in the innerwipe position.

IMPORTANT: Do not rotate the wiper motor shaft during the installation of the wiper motor crank arm.

1.4. Install the wiper motor crank arm on the wiper motor while maintaining a 4-8 mm (0.157-0.315 in) gap between the V-grove in the wiper motor crank arm and the tab.

NOTE: Refer to Fastener Notice in Service Precautions.

Install the wiper motor crank arm screw. Tighten Tighten the wiper motor crank arm screw to 16 N.m (12 lb ft) .
Install the wiper motor crank arm cover and seal.


6_23_2012_11_52_52_pm.gif

Check the gap between the wiper motor crank arm and tab. If the gap is not 4-8 mm (0.157-0.315 in) , remove the wiper motor crank arm and repeat installation steps.
Install the drive link onto the wiper motor crank arm.
Install the drive link screws. Tighten Tighten the drive link screws to 5 N.m (44 lb in) .
Install the wiper system module cover.
Inspect the wipers for proper operation.

Additional procedures: Wiper Motor Module Replacement.

TOOLS REQUIRED
J 39822 Wiper Arm Puller

REMOVAL PROCEDURE

Turn the ignition switch to the ACCY position.
Set wiper switch to the PULSE position.
Turn the ignition off when the wiper arms are in the innerwipe position and not moving.
Disconnect the washer hose from the washer nozzle.
Remove the cover from the wiper arm nut.
Remove the wiper arm nut from the wiper transmission drive shaft.
Using J 39822 remove the wiper arm from the wiper transmission.
Remove the wiper blade from the wiper arm.
Clean the knurls of the wiper transmission drive shaft with a wire brush.



Install the wiper blade onto the wiper arm.
Install the wiper arm onto the wiper transmission drive shaft. IMPORTANT: Hold the measuring device at 90 degrees (perpendicular) to the wiper blade tip.
Measure the distance from the wiper blade tip to the solid edge of the windshield blackout. Position the wiper arms at the following distances:

LH - 147 mm (5.79 in) above the glass blackout.
RH - 123 mm (4.84 in) below the glass blackout.

NOTE: Refer to Fastener Notice in Service Precautions.



Install the wiper arm nut onto the wiper transmission drive shaft. Tighten Tighten the wiper arm nut to 48 N.m (35 lb ft) .
Install the cover on the wiper arm nut. IMPORTANT: Lubricate the washer hose with the windshield washer solvent to ease installation on the washer nozzle.
Install the washer hose on the washer nozzle.
Inspect the wipers for proper operation.



Remove the wiper arms from the vehicle.
Remove the air inlet grille panel.
Remove the wiper motor.
Remove the air inlet panel to wiper motor module screws.
Remove the wiper motor module from the vehicle.
Remove the insulators from the wiper motor module.

INSTALLATION PROCEDURE

Install the insulators onto the wiper motor module.
Align the wiper motor module to the air inlet panel. NOTE: Refer to Fastener Notice in Service Precautions.
Install the air inlet panel to wiper motor module screws. Tighten Tighten the air inlet panel to wiper motor module screws to 10 N.m (89 lb in) .
Install the wiper motor.
Install the air inlet grille panel.
Install the wiper arms onto the vehicle.
Inspect the wipers for proper operation.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 23, 2012 | 2002 Pontiac Montana

1 Answer

Location of diesel fuel filter on toyota lucida emina import


if its the slarnt 4 mid mount mtr it maybe up front under the bonnet if not trace the fuel line back from the pump it should lead u to the filter housing

Sep 11, 2011 | Toyota Previa Cars & Trucks

1 Answer

I can get the old wiper blades off my 2008 avalon but don't know how to put on new ones. do you have to remove something from old blade?


Hello,
  1. After you have removed the old wiper blade make sure to remove any adapter left behind on the actual wiper arm as the new blade should come with a multi use adapter.
  2. It should just be a bare metal rounded hook bar now.
  3. Now if there is not adapter on the new wiper blade then put the one provided on. Often times the wiper blade comes with this adapter already on the wiper blade.
  4. Pull the wiper arm out a bit and set the new blade under the open section of the wiper arm.
  5. That adapter will have a little play to it.
  6. Push it up a bit so it fits in the slot on the wiper arm and pull up on the wiper blade and the blade should "click" into place.
Do the same for the other side and your good to go. I also recommend Raine X for your windshield. My experience as a mechanic and a storm chaser has proven Rain X to be invaluable in severe weather.
Regards, Tony

Apr 23, 2011 | 2008 Toyota Avalon

1 Answer

How do I replace wiper blades


First, pull on the wiper arm until it raises and locks into the service position. The wiper arm will stand by itself once you raise it past a certain point.
Then find the clip on the underside of the wiper arm (rotate the blade slightly to get to it.
Press the clip in while simultaneously pulling the old wiper blade off the wiper arm. You can then discard the old blade.
Align the new wiper blade with the wiper arm track. Slide it along the track until you hear it click.
Repeat this process with the other wiper blade to complete the replacement of wiper blades on your Highlander.
Return the wiper arms to their normal position against the windshield. Done!

Dec 05, 2010 | 2005 Toyota Highlander

1 Answer

I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window.


Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove:
  1. Turn ignition switch to ACCY position.
  2. Turn wiper switch to PULSE position and turn ignition OFF when wipers are stopped in the innerwipe position.
  3. Push the wiper blade clip button IN and remove wiper blade from wiper arm.
To Install:
  1. Insert wiper arm hook through opening in wiper blade.
  2. Place wiper blade pivot in the inside radius of wiper arm hook.
  3. Pull on wiper blade pivot into hook until it locks into place.
  4. Check wipers for proper operation.
Wiper Arm To Remove:
NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly.
  1. Remove washer hose.
  2. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch.
  3. Remove wiper arm from shaft.
To Install:
  1. Place wiper arm on shaft so that wiper arm aligns with marks placed on windshield.
  2. Press arm assembly on shaft and push retaining latch IN.
  3. Connect washer hose.
  4. Remove windshield markings and check wipers for proper operation.
prev.gif next.gif

Oct 26, 2010 | Chevrolet Suburban 1500 Cars & Trucks

2 Answers

How easy is it to fit a prop shaft coupling on a Toyota lucida estima 1991


Undo front coupling first and slide shaft towards the rear of the vehicle. Just enough room then to slide the front coupling downwards may need to use hammer on old front coupling.
Replace front coupling. Replace rear coupling.

Nov 13, 2009 | 1991 Toyota Previa

1 Answer

How to replace the wiper insert at the back of


moz-screenshot.jpg
  1. REMOVE RR WIPER BLADE
    1. Raise the rear wiper blade to the position as shown in the illustration where the meshing of the claw disengages with a clicking sound. NOTE: Be careful not to break the claw.
    2. Pull straight the rear wiper blade to vehicle's left from the wiper arm. NOTE: Do not fold the rear wiper arm with the rear wiper blade removed from it.1722d05.gif

  1. REMOVE REAR WIPER RUBBER
    1. Place the rear wiper with the rear end of the rubber protruded from the blade stopper as shown in the illustration. NOTE: Do not pull out the wiper rubber forcibly, as the backing plates will become deformed or the blade claws will become damaged. HINT: The rubber can be easily pulled out by pushing the middle area of the blade.
f54b10a.gif
  1. INSTALL REAR WIPER RUBBER
    1. Install the 2 wiper rubber backing plates to the rear wiper rubber. NOTE: Be careful to observe and keep direction of curvature for correct replacement.
0dd144d.gif
b. Insert the rear wiper rubber from the claw of the middle of the rear wiper blade into the rear end position.
8f40009.gif
c. After passing the rear wiper rubber through the rear end side claw, protrude it from the rear end stopper and pass it through the front tip side claw.

Sep 12, 2009 | 2005 Toyota Matrix

1 Answer

Removing wiper blades


6eb8291.gif To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Turn the ignition switch to the ACC.
  3. Set the wiper switch to the PULSE.
  4. Turn the ignition off when the wipers are in the innerwipe position.
  5. Depress the wiper blade clip button
  6. Remove or disconnect the following:
    • The wiper blade from the inside of the wiper arm
gm_mv_ven_wiperbladel.gif
  • The wiper arm out through the opening in the wiper blade
  • To Install:
    1. Install or connect the following:
      • The hook of the wiper arm through the wiper blade opening
      • The wiper blade pivot into the inside radius of the wiper arm hook
      NOTE: Pull the wiper blade until the pivot locks into the hook.
    2. Check wipers for proper operation.

    Mar 30, 2009 | 2003 Pontiac Montana

    1 Answer

    1993 jeep cherokee country series--replace windshield wipers


    Are trying to remove the blade or the arms?

    The arms are released by holding the wiper blade fully extended away from the winshield and wiggle the arms off.

    The blades are removed by a little tab where the blade hooks to the arm,using a small screwdriver push down on tab,and slide blade off arm but do not let arm slap windshield as it could crack it,I have seen people pull and the blades suddenly come off and the arm slaps down,yor can put a towel or cloth down where the arm sits against the windshield to prevent the possibilty of the arm slapping down.

    Dec 25, 2008 | 2001 Jeep Grand Cherokee

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    703 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8557 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...