I have a 2000 grand Prix GTP getting the code P0449 EVAP vent solenoid circuit malfunction I have tested the vent solenoid and it works properly I replaced the gas cap I checked for voltage at the plug on the pink wire with the key on and I do have power So my question would be is that indicating the PCM is not grounding the solenoid when its supposed to be meaning the PCM is bad

https://www.youtube.com/watch?v=34WJXJMNtfY https://www.youtube.com/watch?v=PErhl_mIwGA

it may not just be the vent need to check the circuit and lines P0449 Chevrolet Evaporative Emission Vent Valve Solenoid Malfunction P0449 Evaporative Emission Control System Vent Valve Solenoid Circuit... EVAP Code P0449

DTC P0449 Evaporative Emission (EVAP) Vent Solenoid Control Circuit.
Circuit Description
An ignition voltage is supplied to the evaporative emission (EVAP) canister vent solenoid valve. The control module grounds the EVAP canister vent solenoid valve control circuit to close the valve by means of an internal switch called a driver. The scan tool displays the commanded state of the EVAP canister vent solenoid valve as ON or OFF. The control module monitors the status of the driver. If the control module detects an incorrect voltage for the commanded state of the driver, this DTC sets.

Do you know how to test automotive electrical circuits using a volt meter ? How to test a transistor (driver) inside the PCM . Videos on youtube. Do you know what a wiring diagram is ?
Also search P0449 on youtube . Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size . Under system click engine ,then under subsystem click fuel controls . Click search the blue link. Scroll down to #9 diagram . Circuit for vent solenoid . This video is a chevy truck ,doesn't matter .
GMC Chevy Truck DTC P0449 EVAP Vent Solenoid Control Circuit

DTC P0449: Evaporative Emission (EVAP) Vent Solenoid Control Circuit
Do you know how to do electrical testing ?

Do P0449 EVAP Vent Valve Solenoid Circuit Malfunction EVAP Vent Solenoid Control Circuit P0449 repair GM

What about it ? What would you like to know ? Where is it , what is it ? What engine does yours have , six different possibilities .
DTC P0449: Evaporative Emission (EVAP) Vent Solenoid Control Circuit.
Battery voltage is supplied to the EVAP canister solenoid valve. The ECM grounds the EVAP canister vent solenoid valve control circuit through an internal switch called a driver. The ECM monitors the status of the driver. A scan tool will display the commanded state of the EVAP canister vent solenoid valve as ON or OFF. P0449 Vent Valve Testing EVAP Systems

How do I test a purge solenoid? / Diagnosing an EVAP ...

www.ericthecarguy.com/.../13335-how-do-i-test-a-purge-solenoid-diagn...

My brothers 2000 Chevy Cavalier has a P0440 code. ... the PCM will test the circuit condition of the purge valve solenoid and vent valve solenoid so with the key ...

P0446 2000 chevy S10 4WD Replacing EVAP Vent Valve ...

? 7:54
https://www.youtube.com/watch?v=EVWDc9sM1Co
May 7, 2014 - Uploaded by omar ERA
code .P0446. ... Chevy Truck Hard To Fill Gas Tank - GM EVAP Codes P0442, P0446, P0455 or P0449 ...

EVAP Purge Solenoid Removal - YouTube

? 4:24
https://www.youtube.com/watch?v=Xj605HENFno
Feb 26, 2008 - Uploaded by richpin06a
EVAP Purge Solenoid Removal Saturn S-series. ... Hi, is thispurge can solenoid in the same location for ...

EOBD II Error Code: P0449
Fault:
Evaporative Emission (EVAP) System, Vent Valve - Circuit Malfunction
Possible Cause:
Wiring harness.
Evaporative emission (EVAP) canister purge valve.
Engine control module (ECM).

Here is the definition of the code and possible causes.

P0449 PONTIAC Description The Engine Control Module (ECM) monitors the Evaporative Emission System (EVAP) Vent Valve/Solenoid system wiring for opens or shorts.

When is the code detected?The Engine Control Module (ECM) has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Possible causes - Vacuum leaks, damaged hoses or improper routing
- EVAP system - Check fuel cap, canister, valves or components
- Faulty purge or vent solenoids
- Check connector and wiring
- Fuel saturated vapor canister
- Failed EVAP vent solenoid
Read more: http://engine-codes.com/p0449_pontiac.html#ixzz2M1YJd7DU

check engine light ison,autozone says code is P0449 this is whattheir ticket says:

The PCM has determined that a malfunction exists in the electrical circuit for the vent valve/solenoid in the evaporative emission control system.

Definition:
EVAP (Evaporative Emission System) purge/vent solenoid circuit condition

Explanation:
The solenoids and system wiring are monitored for opens or shorts

Probable Causes
1- Purge or vent solenoids defective
2- Check connevtor and wiring
3- Fuel saturated vapor canister
4- Failed EVAP vent solenoid

P0446 - Evaporative Emmission Control System Vent Control Circuit
Evap vent valve has only one purpose. It closes in order to seal the vent so the EVAP system can pressurize and ensure there are no leaks. Evap vent valve is usually supplied Batt. voltage with key on. The ECM's driver controls the ground, and when grounded, activates the valve (closing it). If the ECM detects a short to ground, and open,or a short to battery voltage on the control circuit, P0446 will set. Code also may refer to ECM detecting that EVAP system is unable to achieve or maintain vacuum during test.

Symptoms: There will be no obvious symptoms to driver, other than MIL illumination.

Causes: A code P0446 could mean one or more of the following has happened:
* Faulty vent valve
* Open, short or excessive resistance on Vent valve control circuit
* Blockage of vent valve
* Bad PCM

Possible Solutions: With a P0446 OBD-II trouble code, here are some things to try:
* Replace Vent valve
* Repair open, short, or resistance problem in control circuit
* Repair open, or short, or resistance problem in power circuit
* Replace PCM


Review this information, Test it and tell us news.