Question about 2000 Mitsubishi Eclipse

2 Answers

Blower motor not woking - 2000 Mitsubishi Eclipse

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Most common issue is the blower motor itself. Unplug it and test for 12v w/ key on and fan set to hi. If you have 12volts you need a new motor. If not check the fuse. If the fuse is good check for power at the resistor. Both the motor and resistor are below the glove box. Access them from underneath.

Posted on Apr 14, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 19 Answers

Quite often if it works on high setting It is a problem with the fan regulator. If it does not work at all I would check

Posted on Apr 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change ac blower on a 2001 chevy silverado with the 5.3 liter v8


With Delphi Blower Motor
  1. If equipped, remove the sound insulator panel.
  2. Remove the blower motor insulating cover screws.
  3. Disconnect the electrical connector from the blower motor.
  4. Remove the blower motor insulating cover.
  5. Pull the retaining tab down while turning the blower motor counterclockwise in order to disengage the blower motor from the heater/ventilation module.
  6. Remove the blower motor.

With Visteon Blower Motor
  1. Remove the sound insulator panel.
  2. Disconnect the electrical connector from the blower motor.
  3. Remove the screws from the blower motor.
  4. Remove the blower motor from the HVAC module.
  5. Remove the retainer from the blower motor wheel. Discard the retainer.
  6. Remove the blower motor wheel from the blower motor.

Jul 27, 2014 | 2001 Chevrolet Silverado

1 Answer

Cadillac window repair


Try changing window switches from known good door. Make sure fuses are good!

Mar 07, 2014 | Cars & Trucks

1 Answer

Ac blower stop woking


chk out the fuse(blower fan) motor

Sep 17, 2013 | 2002 Cadillac Deville

1 Answer

My heater quit woking i put a wiring harnessand a blower sensor blower aint woking or nothing?


Blower sensor ??
You mean blower resistor ??
Are you getting power and ground at the blower motor ?

Jan 27, 2013 | 1994 Ford Escort

1 Answer

My blower motore is not woking on a e320 2001


Once a blow motor regulator on the e320 goes bad over time, it will cause your blower motor to act erratically or just stop working.
It is located in the passenger footwell above the knee area. I can walk you through the diagnosis and replacement procedure. If you don't want to mess with it, I know that most shops will try to charge you around $200-250 for it and try to get 1 hr for replacement.
If you have a mechanic friend, you can buy the part from www.autohausaz.com or www.rockauto.com for around $100 shipped and negotiate a replacement cost.
I will be happy to help you further if you decide to replace it yourself.

Mar 27, 2011 | Mercedes-Benz E320 Cars & Trucks

1 Answer

2006 chevy eqinoix blower motor quit working on one setting, would work on high, then quit altogether. Then it started woking again on all settings??


Hello! The Blower Motor Resistor Pack (see picture below) Which is bolted to the top of the blower motor assembly has a loose connection at its connector or in the component assembly...Check for dirty contacts on both male/female connector pins...Pull the resistor pack and inspect for broken or loose connections...Cost is around $30...AC Delco part #1580647...Guru...Saailer

saailer_70.jpg

Jan 08, 2011 | 2006 Chevrolet Equinox

1 Answer

The heater blower in my 2002 sentra is only woking when on the highest setting...do you know what the problem could be?


The blower resistors have gone bad and needs to be replaced.

The 2002 Nissan Sentra blower motor resistor is located near the blower motor itself, which can be found under the dashboard, on the passenger side of the car.

To access it, you have to remove the glove compartment and the isolation panel that covers the bottom of the blower. Do the following steps:

  1. first, locate and open the glove compartment on the passenger side;
  2. remove the four upper screws and slide the door lock bracket out;
  3. pull out the two pins at the inner bottom corners of the compartment;
  4. take out the glove compartment assembly;
  5. remove the two screws retaining the isolation panel and slide the later out.
Looking under the dashboard, you can now see the blower motor and, on its left side, near the firewall, the resistor block brown connector.

To take out the blower motor resistor:
  1. remove the white plastic bracket that faces it;
  2. unplug the brown connector;
  3. remove the two screws on the resistor's socket;
  4. pull the resistor block out.
The resistor block is actually a PCB ("Printed Circuit Board"). The traces printed on this board have different electrical resistance, and are used by the control assembly to vary the speed of the blower fan.

I believe Auto Zone or Parts Source has the blower resistor you need. Good luck

Nov 03, 2009 | 2002 Nissan Sentra

1 Answer

No heater or a/c


it is the control unit or a vacuum line off the back of the control unit remove the unit and check for vacuum lines off the back and check the vacuum lines under the hood first

Feb 05, 2009 | 1985 Ford F150

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...