Question about 1995 Toyota 4Runner

2 Answers

Engine code 13 and 25

I have tried everything, found out that 6th cyl is not operating, ran out of Ideas, would someone help please?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 133 Answers

Code 13 is problem with crank sensor. interruption of crank sensor signal. Check connection at harness connector. Check leads for internal breakage. I would check for coolant level being low. That particular engine is known for cylinder head gasket problems.

Posted on Apr 14, 2014

Testimonial: "Thanks Sir, it started after a tech. tests the connector where the dist. cap, it showed differentiate in voltage/ohm..Temp. got hot, shut down but crank. Yes, I replaced the head gasket. So do U have any idea of code 25? I checked/replaced everything and found out that 6th cyl. is not turning. I took out the wire the engine rpm remains the same. I took out the plug, it is fired. So is that mean I need to rebuild ??? Thank you."

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 22 Answers

What is the entire code? Its normally 5 digits beginning with a letter and 4 numbers after it

Posted on Apr 14, 2014

Testimonial: "No, it is OBD1, so it has no letter just numbers by blinking light."

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine Code O2 Sensor Circuit, HV Bank 1, Sensor 2


You did not say what your car was ,however most newer cars use 2 oxygen sensors per bank, if it is a 4 cyl replace downstream o2 sensor,if 6 or 8 cyl bank 1 sensor 2 is downstream sensor on bank that has cyl 1 on it.upstream sensor is in front of catalytic converter downstream is after the cat

Mar 17, 2015 | Cars & Trucks

2 Answers

Someone pour sugar in gas tank


did your engine get hot the second time. if it was me i would have an estimate for everything to be perfect and take the person who did it and take them to court. sugar could ruin your engine, and you could do the same if u run it too lean, cause your cyl head temp could get really hot.

Aug 05, 2013 | Chevrolet Cars & Trucks

1 Answer

VEH. RUNS FINE AT IDLEBUT WILL DIE OR TRY TO DIE WHEN GIVING IT GAS. AT ONE POINT I DID GET A MISFIRE CODE IN CYL. 1 & 4. CLEARED CODES. REPLACED PLUGS , COILS AND WIRES SAME PROBLEM. CHECKED...


you havent stated year but look on the inlet manifold somewhere ?????? their could be a idle control valve and how it operates is it allows aiir into manifold engine side of buterfly ,this valve is stuck or gummed up or just not working .try it first and if no joy then put it into a local garage is the best i can suggest as these things can be tricky for a non professional to sort out even for someone like me with 40+ yrs experiance and i learn new things every day with these fancy electronics on modern vehicles

May 17, 2011 | Kia Spectra Cars & Trucks

1 Answer

1992 Toyota Camry le 6 cyl. 140k recently


Have you checked to make sure you hooked everything back up and correctly some of these hoses have a airflow sensor in them ? The best bet would be to go over all the hoses check for cracks in them.Have a scan ran on the ECM/PCM to see what codes come up some auto parts stores will run this scan for free.it will tell you if a part is going bad. Hope this helps and good luck

Jun 28, 2010 | Cars & Trucks

1 Answer

Code p306 Chrysler 3.8 Engine, Help


Is Cylinder 6 have spark now or not?

May 26, 2010 | 2001 Chrysler Town & Country

1 Answer

Check Engine Light coming on


get the soft ware up grade. and have the coils checked.

Mar 03, 2010 | 2002 BMW Z3

1 Answer

1999 Land Rover Discovery II engine miss


Observe the engine running in the dark to see if there are any spark jumps from the wires or coil, you may have a carbon track.....

Feb 16, 2010 | 2001 Land Rover Discovery Series II

Not finding what you are looking for?
1995 Toyota 4Runner Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...