Question about Cars & Trucks

2 Answers

Trying to determine engine size on 1976 international single axle dump truck

Trying to determine engine size

Posted by on

  • Mean gene
    Mean gene Apr 14, 2014

    VIN# D0532FHA21833



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 249 Answers

It should be printed on the owner's vehicle registration document under cylinder capacity. If you do not have the vehicle registration document, you should be able to order a replacement - usually a fee is charged - which will give you all the details. You should be able to get a form from your vehicle registration department. That will depend on your location. In the UK, the main offices are in Swansea, Wales. In the rest of the world it is likely to be your nearest Department of Motor Vehicles (DMV) office. Local police or post office should be able to direct you to the nearest registration office. They would need to hold those details in case they need to contact that office.

Posted on Apr 14, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 17,173 Answers

What is vin number? That will tell you. IF not get the engine casting number.

Posted on Apr 14, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Dump truck sizes

A dual axle dump truck (ten wheels) is normally rated at 10 cubic yards (270 cubic feet) load capacity.
A single axle dump truck (six wheels) is normally rated at 5 cubic yards (135 cubic feet) load capacity.
These are volume measures not weight measures.

Oct 09, 2017 | Cars & Trucks

1 Answer

27000km best fuel usage 11.4 L/100 no joy from Mazda Aust. Put 285/70 17 tyres 14.3L/100

Putting different tyres on will alter the accuracy of the speedo and the recording of distance, so I wouldn't pay much attention the fuel economy. For example, a single revolution of the axle will remain constant regardless of the wheel size, but the revolution of the wheel versus distance traveled will vary depending on the diameter of the tyre fitted. If the new tyre was, say 10 cms circumference larger, then the car will travel 10cms further each full revolution (that is 100 meters every 1000 turns. If your speedo sensor is determined by the number of revolutions of the axle, then every 10,000 turns you will have travelled a kilometer more than with the old tyre size (less if the circumference is smaller). The figures you give convert to (UK) 25 mpg dropping to 20 mpg with the new tyres. Does seem poor consumption figures for a small car, but if a big engined truck that might be acceptable. All depends on how you drive it as well.

Feb 08, 2016 | Mazda Cars & Trucks

1 Answer

Where can i find a emision diagram for 1976 chevy 2 ton v8?

  • Hi Sanjuana:
  • 1976? There really wasn't a lot of emission control associated with engines back then.
  • What engine size is it? I'll try to dig up some info for you.
  • Please reply as a comment to this post.
  • cheers.

Nov 19, 2015 | Cars & Trucks

1 Answer

Where can I get a wiring diagram for a 1984 L9000 dump truck

Hi Larry:
That's a tall order.
I have a 1980 L8000 and a friend has a 1976 L9000.
We both do most of our own maintenance.
The question that I have for you is, "what problem are you trying to solve?". Maybe we can help.
Gotta keep that old iron running!

Sep 17, 2015 | Cars & Trucks

1 Answer

Will a 1971 buick 350 cu inch Motor interchange with a 1976 buick leSabre 350 cubic inch engine

Yes they should interchange just fine and you can use a HEI ignition system or any high energy ignition system.

Jan 13, 2012 | 1971 Buick Skylark

1 Answer

My 1999 Olds intregue sounds like a sewing machine, and it sounds like it comes from the left frount part of the engine.. have replaced left and right axels, breaks and rotated tires and still has the...

There could be internal engine damage, say like a worn timing chain rubbing against the pan. If you have replaced the axles, brakes, and rotated tires, and determined the engine is the problem, then I would consider a replacement, unless the cost is too high to justify.

Nov 04, 2011 | 1999 Oldsmobile Intrigue

1 Answer

Need to determine what size tank my truck has vin

Behind axle tank is 18 gal short wheel base side mount is 16 gal long wheel base side mount is 19 gal

Oct 02, 2010 | 1990 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

14512 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides