Question about 2005 Ford F-150 SuperCab

1 Answer

Ford codes how to fix a code 1074 1998

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 845 Answers

System to lean--bank 2--, this means that an oxygen sensor in bank 2 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 2 is generally the side of the engine that doesn't have cylinder #1.in the vast majority of cases, simply cleaning the maf sensor will do the trick. (MAS S AIR FLOW SENSOR) you can go to any auto parts store and buy a can of sensor cleaner, just follow instructions on can. but be very careful with the sensor it is very delicate. be sure it is dry before replacing it.check all vacuum lines and be sure fuel filter is not clogging up. good-day!

Posted on Apr 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix error code C1211. My make and model is the 1996 Ford Econoline E-250, 4.9L engine.


I can not find a C1211 Ford error code. I did find a
P1211 Injector Control Pressure Sensor Above / Below Desired
Error code for Ford. https://www.engine-light-help.com/ford-check-engine-light.html
A Generic C1211 OBD2 error code specifically refers to the camshaft (cam) timing.
http://c1211.engineerrorcode.com/

Nov 16, 2016 | Ford Cars & Trucks

1 Answer

Engine Code PO430


P0430 Ford - Catalyst System Efficiency Below Threshold Bank 2

Possible causes - Three way catalyst converter Bank 2
- Exhaust tube
- Intake air leaks
- Fuel injectors may be faulty
- Fuel injector leaks
- Spark plugs may be faulty
- Improper ignition timing
- Engine Control Module (ECM) Tech notes As the code description implies the P0430 code means that the vehicle's control module has detected that the three-way catalytic converter is not working properly (is not as efficient as the factory is expecting). Replacing the oxygen (O2) sensors may sometimes fix the code, but in most cases the catalytic convert needs to be replaced to fix the problem. If the P0430 code is combined with other codes, try fixing the other codes first.

Mar 14, 2015 | 2010 Ford F-150

1 Answer

1998 Ford Mustang 3.8L broken hose.


Have you replaced the broken hose? The bad part can cause the other codes to appear so fix what you know is bad, disconnect the negative battery cable for 10 minutes afterwards and then start it up and see what happens.

All you need to do with the codes are to put each one in the search bar and search for ford code p1443, ford code p0136, and ford code p0141. But do that after you fix the obvious problem.

Feb 18, 2018 | 1998 Ford Mustang

1 Answer

Getting Code P0463 for a 2003 Ford Expedition. Any input how to fix or what that is?


The code P0463 means Fuel Level Sensor "A" Circuit High
To fix the code you need to replace the fuel sending unit

Jul 30, 2011 | Ford Expedition Cars & Trucks

3 Answers

How to fix ford contour code p0708


this code indicates a problem with the transmission range selected switch, this switch is on the transmission case where the shift cable attaches, when u select a gear it sends a signal to the computer control that u want lets say Reverse by sensing the range selector switch feedback, replace the switch will most likely cure the code, then clear the code and drive a few miles.

Jul 22, 2010 | 1995 Ford Contour

1 Answer

Computer error codes


this is your O2 sensor and is located after the air filter so check your air filter it may need to be replaced it is not getting the correct amount of air
the other code it is private for the ford dealer only but it may go out once you fix the air sensor

May 29, 2009 | 1997 Ford Explorer AWD

3 Answers

What does computer code p1131 manufacturing control fuel air metering mean


Code p1131 manufacturer control fuel air metering, on a 2003 Ford Taurus. Where is part? Is there an easy way to see if it can be fixed without buying the expensive part?

Apr 27, 2009 | Ford Explorer Cars & Trucks

Not finding what you are looking for?
2005 Ford F-150 SuperCab Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

80637 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...