Question about 2006 Chevrolet Colorado

Open Question

Abs code still get abs code C0040 after replacing both hub assemblies and resetting codes. Now says rt front speed sensor circuit.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

co7196
  • 3433 Answers

SOURCE: abs light

Turn on ignition switch and system should chk itself. If all is right the light should drop out..You may have to drive it for the sensors to register presence.

Posted on Jun 03, 2009

  • 1752 Answers

SOURCE: abs kicks in at low speed trying to stop. Replaced

Check the speed sensors at each wheel. http://www.ehow.com/how_4521137_replace-abs-wheel-sensor-chevy.html

Posted on Oct 15, 2009

wracefans24
  • 1985 Answers

SOURCE: I'm having the same problem with the trac and abs

that sounds correct,
the ABS sensor is located in the front wheel bearing,So it's easier to change bering and hub assembly

Posted on Dec 10, 2009

  • 33 Answers

SOURCE: How do I fix the ABS front speed sensors without

you don't. the wheel speed sensors are built into the hubs.

Posted on Feb 12, 2010

  • 14585 Answers

SOURCE: I need to replace the

The abs sensor is part of the bearing. the wire goes to the abs module. the speed sensor is mounted on the backside of the transmission, passenger side. The speed sensor ha s one bolt that holds it in. The abs sensor, you will have to remove the strut bolts , the tierod arm, the caliper and the bracket that holds it, remove the rotor, remove the big nut that holds the cv axle the the hub. Push the cv axle out, and there are 3 bolts to remove to get the bearing out. once you get the bolts out you can knock the bearing out with a hammer. Look where the wire is, as it needs to go back in the same location. Also follow the wire up and you will find a disconnect plug attacvhed to the fender well.

Posted on May 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On grand prix2006 code C0040 which weel is that my computer tell me rear but no side


It is the right front (RF) ABS sensor that this codes corresponds to nothing to do with the rear.. Are you using a GM TECH 2 scanner? If not that is the problem.

Nov 22, 2016 | Cars & Trucks

1 Answer

Have a 2004 gmc yukon getting codes c0040, c0550,c0455,c0296 in the abs computer. Trac and abs light on as well as suspension control.


C0040 - Right Front Wheel Speed Circuit Malfunction
C0550 - ECU Malfunction - internal write / checksum malfunction
C0455 - Either:
  • A bent terminal or poor connection at the SWPS may be one possible cause; or
  • The vehicle stability enhancement system (VSES) electronic brake control module (EBCM) calibration may be the other possible cause.
C0296 - Transfer Case Delivered Torque for Stability Control System Circuit
http://www.obd-codes.com/trouble_codes/obd-ii-c-chassis-codes.php

Feb 27, 2015 | 2004 GMC Yukon

1 Answer

Abs codes c0040 and c0041 front wheel speed control sensor and circuit


Will be located near the wheel hub. As long as there is no physical damage I would guess you will be replacing the sensor

May 19, 2013 | 2005 Chevrolet Uplander

1 Answer

Abs speed sensor


The hub will not be at fault but the sensor will be. They are prone to water-mud- heat and anything else you drive through. Replace it with a genuine unit

Mar 20, 2013 | 2006 Ford Freestar

1 Answer

TC, ABS and Service brake assist lights are on after changing speed sensor.


make sure your sensor is aligned properly check your connections have you driven the car since you changed sometimes you need to drive the vehicle to reprogram the speed sensor into the abs circuit these are fused circuits check your fuses

Jul 07, 2012 | Cadillac CTS Cars & Trucks

3 Answers

Abs code c 0036,front left wheel speed circuit range / performanc


I agree that it is more then like the the hub bearing assembly that also houses the speed sensor I would first check that there is no damage to the wiring that goes to the hub bearing that could be easy repaired, or debri that has been caked in between the sensor & the hub, use an air preesure to clean it out. Hub bearings are very expensive, so try this first. Good luck

Jun 26, 2010 | 2004 Pontiac Grand Prix

1 Answer

HOW TO REPLACE OR REPAIR WHEEL SPEED SENSOR


It is part of the bearing hub assembly.Very have to do without air tools,If setting multiple abs/tc code (wheel speed sensors) probably abs electronic module or chaffed wires on drivers side at ac lines by air box.Have big problems with this and probably will come back.

Jun 12, 2009 | 2005 Saturn Relay

1 Answer

I pulled the codes and here they are : C0036, C0035, C0040


Sounds like you need front wheel speed sensors. Replace the wheel bearings and sensors. May have an ABS unit fault, but more likely is both wheel bearings/speed sensors.

Jun 10, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
2006 Chevrolet Colorado Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...