Question about 2001 Ford Windstar

1 Answer

2001 windstar im getting codes po172 po174 po301 po302 po 303 po304 po300 installed new coil pack twice new wires,plugs,cam and crank sensors,fuel andair filters,pcv valve and now get these codes. engine shut down in heavy rain storm did all this and still getting codes.runs rough could it be water in fuel.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Get your ECM replaced. Usually it's next to battery or inside front fenders. The rain must have shorted out connections and fried ECM. Engine will sputter until it is done. Usually autozone, advance auto, or dealer has ECM.

Posted on Apr 14, 2014

Testimonial: "ecm on 3.8 engine removed in 1996 for windstar .incorporated into coilpack and pcm.pcm checks out ok."

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2000 ford windstar have replaced

Fuel Pump ?? !!

May have been the only problem
didn't need all the other stuff

ALWAYS know how to test components
NOTHING EVER gets replaced until it fails a TEST

Posted on Mar 31, 2011

saa_aa
  • 241 Answers

SOURCE: 2003 windstar motor icon flashes while driving and engine runs rough then runs smooth again. Gives code po302 , po171, po174, po156. Have done tune up, replaced oxy sensor, coil pack, wiring harness,

you vehicle runs smooth morning , and starts running very rough after the engine start be hot .

Posted on Nov 26, 2011

  • 339 Answers

SOURCE: 2000 ford taurus crank sensor wiring diagram

follow this link and take your pick of many diagrams for the crank sensor.

http://images.search.yahoo.com/search/images?_adv_prop=image&fr=yfp-t-900&va=2000+ford+taurus+crank+sensor+wiring+diagram

Posted on Apr 06, 2013

SOURCE: what causes 2000 taurus engine rough idle but no codes

I had a head gasket going when I have a rough idle. Just weeping coolant past the number 1 cylinder. When I pulled the head the piston was all shiny and steam cleaned. $500 dollars all good now.

Posted on Nov 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 acura tl error codes po301 po302 po304 po306 p1399 po300


PO300 and P1399 are random cylinder misfire detected.
PO301 cylinder 1 misfire
PO302 cylinder 2 misfire
PO304 cylinder 4 misfire
PO306 cylinder 6 misfire
I would say that you have damage to the ignition wiring harness or you ECM is failing.

Feb 17, 2015 | Acura Cars & Trucks

1 Answer

1998 volvo s70 2.4 glt turbo


code p0102 refers to MAF/VAF sensor ---low input ===causes --wiring short to ground. MAF/VAF sensor
code po172 refers to system too rich --bank 1=== causes ---intake blocked --EVAP canister purge valve---fuel pressure ---HO2S sensor
code po random misfires ---plugs --wiring ---injectors--low compression
code po305 refers to cylinder 5 misfire detected ===causes --engine mechanical fault--ignition/ fuel system ---injector ---ECT/MAF

I would check that the air filter is not blocked first as it affects the MAF/VAF sensors . Have a fuel pressure system pressure test done

Feb 13, 2014 | Volvo S70 Cars & Trucks

1 Answer

1997 honda civc 4 trouble codes po301,po302'po303'po304


All cyls misfiring. 97 honda. How many miles?Sounds like plug wires or a wet distributor cap. Yet if it is a Vtec The misfires could be occurring after the cams engage. Possible VTEC solenoid issue.

Apr 05, 2013 | 1997 Honda Civic

1 Answer

2008chevy malibu misfire


Which code you have po300 or po301.po302 .PO301,PO302 will be coil or module.PO300 could be bad spark plugs,vac. leak,clog fuel filter,bad fuel pump,bad battery.

Feb 04, 2013 | 1996 Ford Crown Victoria

1 Answer

What's your problem? my 2004 mercury monterey has eight codes ,po301,poo53,po106,po316,po300,po304,po305,and po306


PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

Aug 13, 2011 | 2004 Mercury Montery

2 Answers

Hello i have a GTI its a 2.0L manual transmission, i have been having problem after problem thus far. Current engine codes PO422, PO300,PO304,PO303,PO302. I do not have a code list to see what these are...


I think that PO422 is the Cat Converter, it may be bad or may be just the O2 sensor.
The PO300, 302, 303, 304 code have to do with the ignition coils or wires. (302, 303, 304 means there are ignition /firing problems in cylinders 2, 3and 4). If your lucky just the wire and new spark plugs.
Google "engine codes Jetta" for more on web. Good luck.

Feb 06, 2011 | Volkswagen GTI Cars & Trucks

1 Answer

5vz-fe misfire codes


Replace the coil pack.

Dec 26, 2008 | 1999 Toyota 4Runner

2 Answers

99 4runner 5vz-fe 3.4 misfire


Replace the coil packs.
Your issue is NOT the converter, or you would have a P0420/P0430 code

Dec 26, 2008 | 2001 Toyota Tacoma

Not finding what you are looking for?
2001 Ford Windstar Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...