Question about Cars & Trucks

1 Answer

The drivers side front and rear windows dont work I have power to the master window switch in drivers door but not to window motors all fuses are ok could it be master switch passenger front and rear work fine from master switch

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Cars & Trucks Expert
  • 226 Answers

You try applying power to the motor with test light to see if they go up and down, if it does. and do you have ground to the power switch, if the answer is yeas to both question, replace switch.

Posted on Apr 14, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2004 Jeep Grand Cherokee driver side power windows do not work

I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.

Posted on Dec 07, 2008

adnanbhatti
  • 1188 Answers

SOURCE: The passenger side front and rear power windows 2005 Lexus ES

Fuse is blown. Replace fuse for the said windows.

Posted on Jul 30, 2009

  • 1 Answer

SOURCE: passenger power window does not work 2002 Silverado HD Ext Cab

i have a 2000 silverado and the windows usally go down fine. but when i roll them up i have to hit the button repeatally to get them to go up. this ison both windows. any suggestions

Posted on Aug 20, 2009

MNfisherman
  • 11896 Answers

SOURCE: 2004 Dodge 2500 RAM Quad-cab.

The switch itself may be faulty. Have you tested it with an ohmmeter? Have you tested power to the passenger switch with a voltmeter?

Posted on Sep 30, 2010

  • 1 Answer

SOURCE: major power window problems. 2000 pontiac bonneville

I had this problem where only the drivers door power equipment works.

It is caused by a splice under the driver's seat. Spice #S302 where the input from the drivers door module to the other door modules connects. It is one of those cheap *** splice that should be outlawed. Moisture gets in it and corrodes. Cut back the wires till you get the good stuff and redo it the right way.

Splice S302 can be found under the carpet about six inches before where the wires go up to the drivers seat. It is in a plastic wrap and tape. I believe the wires for the window are brown and white.

Posted on Mar 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the power window relay located in a 2002 mercury villager?


Principles of Operation
The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
Visual Inspection Chart Mechanical Electrical
  • Improperly aligned window
  • Damaged window mounting
  • Window frame interference
  • Central junction box (CJB) Fuses:
    • F30 (10A)
    • F32 (20A)
    • F34 (20A)
    • F59 (7.5A)
  • Battery junction box (BJB) Fuses:
    • F20 (30A)
    • F27 (45A)
  • Switches
  • Circuits
  • Connectors
  • Heated back light
  • Relays
Which window is not working ?
  • Single power window is inoperative
  • Front door power window switch.
  • Front door power window regulator.
  • Circuit.
  • Driver door power window switch.
  • GO to Pinpoint Test B .

Apr 07, 2015 | 2002 Mercury Villager

2 Answers

Tried it today and none of the windows work from master switch on drivers side except ft passenger window, which went down but will not go back up.


You can't put up the front passenger window with it's own switch ? Did you check the POWER WINDOW RELAY in the instrument panel fuse / relay box ? An you checked POWER fuse 30amp same fuse box ? All window switches have direct power from power window relay !
Fuse Block - Instrument Panel
Left of the Steering Column, behind the storage Compartment
P/W Relay
--
Sunroof Switch Assembly, Window Switch - Left Front, Window Switch - Left Rear, Window Switch - Right Front, Window Switch - Right Rear

Apr 02, 2015 | 2003 Pontiac Vibe

1 Answer

2002 thunderbird window won't go up or down replace swith still wont work fuse are ok does the switch get power


The master switch connector does have circuits that have power on them. The Master switch is not directly connected to the window motors. The switch sends a signal to the Front Electronic Module and the module controls operation of the motor on the driver side. The passenger door window motor is controlled by a different module

Nov 28, 2012 | 2002 Ford Thunderbird

2 Answers

2004 Malibu Maxx-Driver side and rear power windows will not go down. The power window controls for the driver side and both rear windows do not work. The only window that works is the front passenger,...


well you can try "jumping" the correct wire to see if window got up or down... this will tell u if switch is bad... but I would just go but a new master switch... try that before you cause more damage..

Sep 05, 2017 | 2004 Chevrolet Malibu Maxx

2 Answers

What would causw both electric front windows on 2005 caliver not to work? Already change out switches in the middle of the consel??


I would be willing to bet be willing to bet that you did not check for power and ground at the window switches before replacing them.
Want to SAVE MONEY?
Please read this article before continuing: What Else Could Be Wrong?

I am assuming that you have the 4 door model since you specified "both" and "front". So this advice will be based on that. If you have the 2 door version, this could be very different.
If the rear windows are working and the front windows are not, that eliminates both the power source from the circuit breaker to the master switch and the ground circuit to the master switch, The only "component" that could cause both of these circuits to malfunction at the same time would be the master switch. You could, however, have separate failures of each of the window motor circuits between the master switch and the window motors. GM has had more than their fair share of window motor/regulator failures. This type of failure is not likely to occur on both sides at the same time. This would more likely work something like: Passenger side quits, then several weeks or months later, the driver's side quits. You could also have broken wires inside the umbilical between the body and the doors. With the older cars with the master switch in the driver's door, one broken wire could take out both doors. This does not apply to your vehicle, however. Again, this would also not be one of those things that would cause both sides to go out at the same time.
So to wrap it up, you need to check for power and ground moving into and out of the master switch at the correct locations and under the correct switch operating positions. This will require you to get your hands on the wiring diagrams for your power windows so you know what is what.
If the power and ground is ok at the master switch, then you need to remove your door panels and check for power and ground at the window motor connector. If you are missing either power or ground at any point, then you will need to do a wiring repair. If power and ground is available at the window motor connectors, then you need to replace your window motors and/or regulator assemblies.

2-door diagnosis is similar, but you cannot eliminate "source" power and ground to the master switch by operating the back windows. You will have to test for it at the master switch.

Apr 16, 2011 | 2005 Chevrolet Cavalier

2 Answers

Doorlocks dont work except from passenger side. mirrors dont work. windows dont work from anywhere


First, check all fuses to make sure that none are blown.

If the door lock switch works on the passenger side, then the drivers side door lock switch is probably faulty. Use a multi-meter to test the Drivers Side Door Lock Switch (Black and Pink/Light Green wires unlock the vehicle, and the Black and Pink/Yellow wires lock the vehicle)
If the switch is tested and found to be operating properly, you may have a faulty Body Security Module or Drivers Side Door Lock Actuator.

If neither of your Power Mirrors are working, you probably have a faulty Exterior Rear View Mirror Switch, Power Mirror Module, or blown Central Junction Box Fuse.

If none of your Power Windows are working, you probably have a faulty Accessory Delay Relay or a blown fuse in your Central Junction Box or a faulty Master Window Adjust Switch (all of the Power Window Switches feed through this Master Window Switch). If the Power Windows didn't stop working at the same time, you may have faulty Window Adjust Switches, or faulty Power Window Motors, this is very unlikely though. It would also be a good idea to inspect the wiring for any obvious damage.

Mar 15, 2011 | 2005 Ford F-150

1 Answer

I'm trying to find the fuse that works the rear windows


The front and rear windows operate on the same circut.Try all the switches ,master on the drivers door and each rear door.The switches reverse the polartity to operate up and down. If the switches are OK, then tast for power at the widow motor behind the door panel

Feb 28, 2011 | 1999 Toyota Corolla

6 Answers

Windows won't roll down


Does the rear window work from the passenger switch?

Oct 07, 2009 | 2003 Cadillac CTS

4 Answers

2005 saturn ion power windows


dont know, but im having the same problem. my pass. side front wont work, and the driver rear wont work. its a 2005 ion 2 i suspect its the motors in both of them. i will let you know in a day or two, as soon as i check the parts yard to get a couple.

May 22, 2009 | 2005 Saturn ION

1 Answer

Rear side windows


This may be just a case of inadvertently hitting the window lock out n th driver door window switch by mistake. Check that first. Here's some background on window operation

Principles of Operation
The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
Symptom Chart Condition Possible Sources Action
  • All windows are inoperative
  • BJB Fuse:
    • F20.
  • Circuit.
  • Power window relay.
  • Front door power window switch.
  • GO to Pinpoint Test A .
  • Single power window is inoperative
  • Front door power window switch.
  • Front door power window regulator.
  • Circuit.
  • Driver door power window switch.
  • GO to Pinpoint Test B .
  • Vent power window is inoperative — quarter window glass power latch
  • Circuit.
  • Quarter window glass switch.
  • Quarter window glass power latch.
  • GO to Pinpoint Test C .
  • The one touch down feature is inoperative
  • Master window regulator and door lock switch.
  • INSTALL a new master window/door lock/unlock switch. REFER to Switch—Master Window Door Lock/Unlock .
  • The back window will not defrost
  • CJB Fuses:
    • F30 (10A).
    • F32 (20A).
    • F34 (20A).
  • BJB Fuse:
    • F27 (45A)
  • Circuit.
  • Heated back window switch.
  • SEC/timer module.
  • Rear window defrost relay.
  • GO to Pinpoint Test D .
  • The back window defrost will not shut off automatically
  • SEC/timer module.
  • Circuit.
  • Rear window defrost relay.
  • GO to Pinpoint Test E .

Jan 28, 2009 | 1999 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...